IF you use a small impact driver and just grab the outside of the flywheel it comes right off without worrying about ruining the electrical components inside of it. Same with the flywheel puller. Worked like a charm.
If your lucky and screws not seized than yes. I stripped my screws with simple screwdriver. If you don't realy want to buy impact screwdriver, then try hammer your screws with simple screwdriver a little, then try to unscrew. I had to use screws removal bits to remove mine.
Hey! My oil is leaking from that small black plug to the right of the stator. An idea what that’s called? The seal Is bad on it and I need to replace it but can’t figure out what it’s called or where to find one and it’s no the oil plug haha
Nick Santos I didn’t have to buy it since my chain snapped and broke it all 2nd ride out... so the company I bought the bike from sent me all the extra parts free under warranty... I got everything from TBoltUSA.com... you can order it on the website or call them directly and ask for Vince he will help you with every single question you have and they have everything in stock!!
For those of you out there who think they need to go and buy an impact screwdriver I was searching g for a different answer because I don’t have one so I started to experiment and no you don’t if you or your parents own an impact drill that works the same way but if you don’t have that just use a regular screwdriver and a wrench and put the wrench on the screwdriver and keep pressure on the end of the screwdriver and tap the wrench with a hammer and that works too but it will strip the head and round it off
IF you use a small impact driver and just grab the outside of the flywheel it comes right off without worrying about ruining the electrical components inside of it. Same with the flywheel puller. Worked like a charm.
thanks man
Thank you man you were very clear and easy to understand, I subscribed
Helped me do my swap Good video dude 🔥🤘🏿
Thanks man! Appreciate it. 🤙🏽
Do you have to remove the oik before changing
Can you just use a regular screwdriver or do you need an impact screwdriver?
If your lucky and screws not seized than yes. I stripped my screws with simple screwdriver. If you don't realy want to buy impact screwdriver, then try hammer your screws with simple screwdriver a little, then try to unscrew. I had to use screws removal bits to remove mine.
I’m a subscriber vlog epicness
Does the flywheel orientation matter?
Hey! My oil is leaking from that small black plug to the right of the stator. An idea what that’s called? The seal
Is bad on it and I need to replace it but can’t figure out what it’s called or where to find one and it’s no the oil plug haha
Where did you get your stator I have the same bike and same problem no spark
Almost certain I got it from Tbolt USA
Shane Kay did you bike have no so park two?
Kayla Parisien I believe it broke a piece of the stator in a crash and yea wasn’t turning on after the crash
Can you post a link to where you bought your stator and flywheel cover please.
Nick Santos I didn’t have to buy it since my chain snapped and broke it all 2nd ride out... so the company I bought the bike from sent me all the extra parts free under warranty... I got everything from TBoltUSA.com... you can order it on the website or call them directly and ask for Vince he will help you with every single question you have and they have everything in stock!!
For those of you out there who think they need to go and buy an impact screwdriver I was searching g for a different answer because I don’t have one so I started to experiment and no you don’t if you or your parents own an impact drill that works the same way but if you don’t have that just use a regular screwdriver and a wrench and put the wrench on the screwdriver and keep pressure on the end of the screwdriver and tap the wrench with a hammer and that works too but it will strip the head and round it off
Hey man where did you find the stator? I have a 2017 xmotos 125cc with a similar stator and I can’t find one for sale anywhere. Thanks.
Tbolt USA
My stator has a red and green and a green and white wire which do I connect to the green wire ?
hell yeah bro thank you
No problem man! 🤙🏽
How hard was it to get all the wires put in?
I can’t find this part online can you help ?
Great video
Do you know how to replace "Stator"??? Seems like you changed the stator plate... I need to know how to do stator only...
If your gonna change just the stator you might as well replace the whole thing
Hat is the extra dangling rubber piece on your new stator and where does it go- or did your have to take it off?-7:44 to the left of the chain.
solomon Ralston did u ever find that out
Neutral plug/switch.
My stator plate is stuck after removing the two bolts, it will spin
side to side with a hammer about 1/4'' but doesn't seem to
want to be removed.
Do I have to worry about a crack on the stator cover?
Not on the cover necessarily unless things aren’t running right
More maintenance vides please
Your located in Vegas huh?
Cringed at the pliers...
Timmy Waterston part of learning man at least he does it himself and doesn’t take it to a shop
@@motosquid5979 I agree, but still made me cringe haha
And after I got the stator play on I can’t figure out what wires go where cuz the replacement stator is different color wires😂😂😂🤣
We're did u buy your stator from?
i got mine on amazon it has to be a 6 coil
You need to adjust your airfuel ratio screw it’s running too lean
Next time use downward force
Is the tutorial for us, or for you?
You got there in the end, but jeez...
get a cordless impact. damn.
Change your spark plug
My stator blew up