2009 Buck enclave. Wife barely drove it home. Wouldn't start for me. Had a bunch of crank cam codes. Had been clacking at startup for 6 months. Was gonna change sensor. Messed with discord. Unhooked battery for 4 months. Key stick in on position. Read to wiggle screws on fuse box. Now it gets power. When I try starting check engine light blinks super fast and the just a click. I swapped relays around and thought I checked all fuses.... Help I just wanna get it back to point where it tries turning over...
Hi there , please explain clearly what was the problem with the ABS system and how did you Repaire it ? And what ABS system has to do with car not starting !!? Thanks .
it seems that the wiring in these vehicles daisy chains from one module to the next, so if one fails, everything after it stops working. The brakes seems to be a common source of frustration on them. I saw one at a dealer where they literally zip tied the wire harness to the brakes to "fix" it
How does abs gave anything to do with it not starting? I turn abs off on every vehicle anyways. I just bought same 2010 acadia an its not starting so before i replace it i watched this..
Yes sir, u did a great job, but the music loss me. I'm currently having the same problem today and it would have been helpful it I knew what connector and what u did..??
First of all you had us read a novel all the way through the video only to start speaking at the end. You could have just spoke the whole video and told us what you did. Secondly you wrote that it was the ABS module system but when someone asked you, you say you didn't touch the ABS system. And now you giving hints. Idiot!
I'm doing the same thing right now had to get towed home three days ago. Took into starter they said it was bad bought a new one same thing will not start check the relay ignition switch. So I will give this a try because I do not know what else to do. Thanks for the info
2009 Buck enclave. Wife barely drove it home. Wouldn't start for me. Had a bunch of crank cam codes. Had been clacking at startup for 6 months. Was gonna change sensor. Messed with discord. Unhooked battery for 4 months. Key stick in on position. Read to wiggle screws on fuse box. Now it gets power. When I try starting check engine light blinks super fast and the just a click. I swapped relays around and thought I checked all fuses.... Help I just wanna get it back to point where it tries turning over...
what did you do with the ABS module. nothing. then giving hints. not sure what the purpose of your video is if it does not help anyone???????
It’s really not meant to have anyone
@@PTAR1984 thank for sharing no worries
Having the exact same problem with my 2009 Acadia where did you spray that dielectric spray exactly?
If you look at the video in detail I kind of show you
How does the abs stop it from starting ig a safety issue did you have a theft light on ?
Hi there , please explain clearly what was the problem with the ABS system and how did you
Repaire it ? And what ABS system has to do with car not starting !!?
Thanks .
We never touch the ABS system
@@PTAR1984 ... Okay , so what is the problem then ? I did not get it , please explain it to me in here , thanks ...
@@ironfistarrival yeah that was a good question you access they said it was the ABS system and yet they did not say what it was. This was misleading
it seems that the wiring in these vehicles daisy chains from one module to the next, so if one fails, everything after it stops working. The brakes seems to be a common source of frustration on them. I saw one at a dealer where they literally zip tied the wire harness to the brakes to "fix" it
How does abs gave anything to do with it not starting? I turn abs off on every vehicle anyways. I just bought same 2010 acadia an its not starting so before i replace it i watched this..
It’s an integrated system
Help! How did you fix the problem exactly?
Abs Module connector ( plug ) was corroded so clean it And put electrical Grease
So what all you did is cleaned the connectors
How can I remove the plug ?
I highly recommend you go to a certified mechanic or I can help you depending on where you’re located we are based in Miami Florida.
How did you figure out it was the ABS
We started touching the connectors a little by little to find out why it turns off we found out the source
Yes sir, u did a great job, but the music loss me. I'm currently having the same problem today and it would have been helpful it I knew what connector and what u did..??
Noah El Jah I’ll give you a hint driver side firewall
You upload a video then want to give a hint? You are a real pos.
First of all you had us read a novel all the way through the video only to start speaking at the end. You could have just spoke the whole video and told us what you did. Secondly you wrote that it was the ABS module system but when someone asked you, you say you didn't touch the ABS system. And now you giving hints. Idiot!
Wondering did it have any codes , or did you even have the ability to check ?
It just wouldn’t start
@@PTAR1984 Thanks, working on a Traverse same thing , except it has some kind of short
So how do you fix the problem? What did you do? Is this video a joke?
The joke is the your not a professional Read it all over the video
I'm doing the same thing right now had to get towed home three days ago. Took into starter they said it was bad bought a new one same thing will not start check the relay ignition switch. So I will give this a try because I do not know what else to do. Thanks for the info
I have Sam problem it's ok
Looked like a headache
3 days wow
He cleaned the grounds & replaced abs module.
Because of the location of the abs system it gets wet from the wheel well in sorting out the the contact points