Project 100mph Arrma Vendetta 6s
Вставка
- Опубліковано 18 тра 2024
- Welcome back to the channel guys. Today I’m taking my Arrma Vendetta and seeing if I can ferry it to 100 mph. I loaded it with all kinds of goodies. Don’t forget to like and subscribe. Remember when I get 500 subscribers I’m giving one of my subscribers a TAMIYA TT02 Mustang kit. Enjoy the video #rccar #rcvlog #arrma #rchobbies
- Ігри
Come on guys hit that subscribe button! Great video man!! They keep getting better with each one you make! You could always cut the bidy down but if you like that bidy thats a bad idea lol
Thanks bro. I’m trying. I really appreciate it
@@Rc-Krazy your welcome. Some foam tires might help the handling problem a little bit.
Love it man!!! I just clicked 100 in my infraction on 8S keep it up!
Bro I’m determined. I have to do this lol
The recommended body posts from Arrma (ARA320357) should keep the body up more off the ground than that and also the stock receiver with its AVC does really well at keeping it in a dead straight line so a good gyro receiver seems pretty important, I’m enjoying following your journey. Your body shell looks awesome by the way 🤙🤙🤙
Thanks bro. I appreciate the feedback. I’m probably gonna get a stock body and some other things very soon.
Love watching new idea n the imagination us RC people can come up with supwr awsome cant wait for ur next video
It’s the best part of the hobby to me. Taking something and converting it into something better. Nothing like it bro lol
New Subscriber
Thanks for subbing bro.
What is up Carlos! You gonna hit that hundo bro. Here are some things that'll help: get the x6fg RX or one with a gyro. Get a fresh set of hoons elevens and don't use them until you're close to the 100. A Vendetta body is like 50-60 bucks new and works extremely well for speed runs. I hit 109 with the stock motor, same 150a esc you have and a 29t pinion. Hope this helps!
Bro this help a lot. Thank you so much
@@Rc-Krazy no worries 👍
Nice job Carlos. I'm sure your Vendetta will hit 100 once you get it dialed in. Every time I attempt a speed run I spin out or crash. Gyros and AVC never seem to help me. I keep hitting the throttle to soon and don't ease into it as I should. I guess it takes lots of practice and crashing.
It’s a learning process bro. As you can see my driving isn’t going too well either lol. I’m going to get a gyro and a new body and try again
That's the spirit. Often times things just don't go as planned. You have an awesome channel and that's what counts. Keep bringing new content for us to enjoy. 👍@@Rc-Krazy
@@RCRoads thanks for the kind words bro. I’ll try to keep good content coming out
I had the same problem with my Vendetta. All I did was turn on the Gyro, and she was good. I got the same body. Try getting the side skirt and front lips.
I just ordered a gyro a new gyro and I’m going to get a new body and front splitter to see how that goes. I’ve been getting a lot of advice from everyone and I’m on a budget lol
Looking very nice! Bummer that the body is scraping though!
Yeah it is. I’m going to replace it and up my opinion gear
@@Rc-Krazy yeah it sounded like a fairly low tooth count for what you are trying to achieve but I’ve never built a speed runner like that so i don’t know for sure
@@BargainBashersRc I bought a large gear so I’ll be trying it out soon
Another Great Video 😊 Carlos
Appreciate that bro.
Great carlos
Thanks bro
13 days later see your at 543 subs. 👍🔥🔥
Yeah bro. I hit my first milestone. Thank You guys so much. The giveaway winner will be announced this week
@@Rc-Krazy love your videos. Keep up the good work 👏
The 35/85mm tires are what make it so squirrely...I got my Vendetta up to 107mph and with those tires it was extremely hard to do and scary...I ended up using the 17mm hubs from my Typhon and got the 42/100 Hoons and its so much easier to handle now
Great. Then that’s exactly what I’ll try bro. I know she has some speed but I just can’t get it to the ground
You should be able to get there with lower voltage. I would go with a motor with more kv and lower voltage (3-4s). It will 100% get you to 100mph and will be less strenuous on the components.
I’m new and learning so I appreciate you guys reaching out to me. I thought with higher kv motors I run the risk of burning it out but with lower kv motor I could just continue to gear it up to make it faster with less risk. 🤷🏾♂️
Ditch the Elevens for some 14mm Dboots Hoons, silver compound.
Much nicer tires💯
I’m willing to try anything bro. Thanks for the suggestion
Good video Sir! Where are you in Ga? RC community getting bigger and bigger here!!
Yeah I’m in ga. Do you know where any race tracks are
Try a gyro. I have the same body on mine and I have 75mm shocks on mine. Seems to work for me.
Ok. I’ll try gyro. I really love the way this body looks on it but I don’t want to mess it up lol
Switch the front and rear Body post work best with those Proform body's and saves you buying new post
Cool. Thanks
Try turning down the steering rait@@Rc-Krazy
Not sure I know you mean. Are you talking about the steering trim?
Not the trim ,the steering throw the amount they turn
@anthonywindham7402 ahhhhh ok bro thanks
Mr C. What kind of hold down tape do u use for your GPS. Mini meter. I just got one. Wally b. Thx
I use some Velcro. That way I can just use it on every car. It’s on Amazon for less than $10
Esc will have low voltage shut off...
How do i win the Mustang 😂😊new subscriber
You’re entered. All you have to do is be a subscriber. Getting the video together now. Good luck bro
@@Rc-Krazy Thanks mate much appreciation enjoyed video these TT02 are money pits but don't own one yet but been looking to by the mustang for ages now
@@SRG-HITMAN-11 well good luck in the drawing. If you don’t win this raffle don’t worry I have more planned
motor could be a little too big and powerful for the weight and size of the the car . No rear diffuser also won't be helping . Poor down force aerodynamics along with the a poor body set up . Also need to check your wheel camber and wheel aline-ment and also check for wheel slop . Also check out your diffs have lubrication and are not too tight , because it will pull to one side or the other when hard on the throttle . Also check your swing arms for side to side rocking motion movement , when they should be tight with no movement . Everything makes a difference on a car with an aggressive throttle on 3S + , especially if your motor / ESC combo is not of the sensored variety . Obviously you got this roller chassis 2nd hand off of ebay , so it's probably not quite up to good tolerance specification as a new one ought to and should be , but a lot of times even new RC'S or roller chassis parts are not up to good enough tolerances of their parts and fittings . Even new RTR RC'S and rollers can be set up poorly set up , and not up to a high tolerance spec with poor tolerances of their parts . You'll have to go through the whole chassis parts to make sure all tolerances of all chassis parts is up to top tolerance specification and working and running smoothly and make sure the diffs drive train are lubricated properly .
Oh wow. That’s a lot to consider lol. I was just gonna get a new body and a gyro to try and fix the problem but I think I should dig a little deeper. Thanks for the info
You need a bigger front splitter and side splitter kill all that scrapping
Dang lol. I was hoping I could avoid that. Oh well I gotta hit that 100. Thanks for the info bro
I don't what is with the those 150 ESC but the 160 are where it's at
I got it on sale from Arrma so I wanted to give it a shot. I think it has more in it I just have to play around with the pinion gear