Keep the junkyard videos coming. I’d watch you turn wrenches all day. What I love is learning how a pro thinks and every now and then picking up a few tricks of the trade!
Great videos. Its amazing that you can do it all with one hand. Glad to see that there is one person in this world who is honest and thorough in his work. Gives me hope in people nowadays. Great video again. Learned much from your videos.
Wow that all road was too nice to be in a junkyard, seriously it looked like it never saw salt. As easy as everything came out. I agree any Auto videos are great.. that Subaru was mint as well
Bilstein is pretty good I think. Pricey on German ebay 500+ for a set, frontside. I think the standard ones are Sachs? Monroe and Koni are known for their quality products.
I had these in one of my allroads they are totally undersprung, way too soft. The blauparts coil spring kit is decent however discontinued. The best option for these cars is to get a Chinese valveblock from ebay for like 70$, Get a bagpiping andy compressor rebuild kit for $30 then get some Arnott Gen 2 airbags for the front. That combo works a treat i have that in my 4.2 allroad combined with hotchkis swaybars and the thing handles like its on rails compared to the factory setup. If anyone wants one of these Arnott coils setups you can have mine for dirt cheap.
@@NaptownTuner They are undersprung trust me i have a set that i had in the car for a week, you will blow through suspension travel anything above 50mph+ if you hit a bump and the dampers are pencils compared to the original units. Multiple people have complained about this with the arnott coil conversion.
@@NaptownTuner They are linier springs replacing the airbags which act as progressive springs they have to be thick windings but they does not mean they are stiff. Look at the size of the springs on the blauparts kit, read some of the reviews of arnott coil conversions on this car on amazon with people talking about beating up their trans pans and oil pans over bumpy roads if you don't believe me. its a 4200lbs car empty don't forget.
Naptown, my Audi is a 2009 a4 b8, the turn signal sometimes switches left and if I hold it down it will stay left, if not it will just not work or turn the right signal on. Can I fix this without getting a new signal lever?
If those are clean and rust free they should go for 400-500. Did you grab the module that goes with them to shut off the suspension light? Its in the back where the air suspension module lives.
Hello neptownt7ner,My car is 2011 Audi a4,I'm from China , Now my car display warming message reads ,gearbox malfunction ,u may continue drive , So I went to repair shop to check it out ,the computer says the fault number is p177500 hydraulic pressure sensor ,adaption value reached And the repair shop told me my TCM is broken and has to be replaced
Keep the junkyard videos coming. I’d watch you turn wrenches all day. What I love is learning how a pro thinks and every now and then picking up a few tricks of the trade!
Great videos. Its amazing that you can do it all with one hand. Glad to see that there is one person in this world who is honest and thorough in his work. Gives me hope in people nowadays. Great video again. Learned much from your videos.
Love junkyard content. More!
Gotta love a junk yard video
Wow that all road was too nice to be in a junkyard, seriously it looked like it never saw salt. As easy as everything came out. I agree any Auto videos are great.. that Subaru was mint as well
Nice. Thank you for sharing
More junkyard videos
Bilstein is pretty good I think. Pricey on German ebay 500+ for a set, frontside.
I think the standard ones are Sachs?
Monroe and Koni are known for their quality products.
I had these in one of my allroads they are totally undersprung, way too soft. The blauparts coil spring kit is decent however discontinued. The best option for these cars is to get a Chinese valveblock from ebay for like 70$, Get a bagpiping andy compressor rebuild kit for $30 then get some Arnott Gen 2 airbags for the front. That combo works a treat i have that in my 4.2 allroad combined with hotchkis swaybars and the thing handles like its on rails compared to the factory setup. If anyone wants one of these Arnott coils setups you can have mine for dirt cheap.
These coil springs look very large
@@NaptownTuner They are undersprung trust me i have a set that i had in the car for a week, you will blow through suspension travel anything above 50mph+ if you hit a bump and the dampers are pencils compared to the original units. Multiple people have complained about this with the arnott coil conversion.
@@Jolinator looking at the size of the springs, I don’t believe you. Haha
@@NaptownTuner They are linier springs replacing the airbags which act as progressive springs they have to be thick windings but they does not mean they are stiff. Look at the size of the springs on the blauparts kit, read some of the reviews of arnott coil conversions on this car on amazon with people talking about beating up their trans pans and oil pans over bumpy roads if you don't believe me. its a 4200lbs car empty don't forget.
@@NaptownTuner i still have a video of me rocking the car like a boat with the bilstein arnotts in it i will upload it tommorow!
I need those do you still have both those front struts?
Is that diagnosis right
did you sell em eventually?
Naptown, my Audi is a 2009 a4 b8, the turn signal sometimes switches left and if I hold it down it will stay left, if not it will just not work or turn the right signal on. Can I fix this without getting a new signal lever?
Sounds like the switch that’s the thing that gets the most use and abuse
Faulty hazard light switch.
More junk yard videos
If those are clean and rust free they should go for 400-500. Did you grab the module that goes with them to shut off the suspension light? Its in the back where the air suspension module lives.
I’m gonna get it in the morning I was there at closing time and didn’t know about it at first, I found out shortly after
@@NaptownTuner Not all the kits included the module just to be advised.
Where can I purchase those my compressor just died
If you live around Indianapolis I still have these for sale
Hello neptownt7ner,My car is 2011 Audi a4,I'm from China ,
Now my car display warming message reads ,gearbox malfunction ,u may continue drive ,
So I went to repair shop to check it out ,the computer says the fault number is p177500 hydraulic pressure sensor ,adaption value reached
And the repair shop told me my TCM is broken and has to be replaced
Thanks for the info, that’s pretty rare
@@NaptownTuner what if the TCM system parameter configuration was tempered ,
@@chrisleon27 the transmission problems are so rare at least they were when I was at the dealer, I don’t have much experience with them
@@NaptownTuner thank u for ur reply ,appreciate it
With some time and patience, I know you can get $500!! All day
With the module to clear to suspension light I’d be happy with $600+shipping or local pickup. First come first serve!
@Neo did you pick these and the module up?
@@Timulating there was no module
@@Timulating nope . No need for me.
Do not own this Audi a6 wagon.