Borg Warner S257SXE Billet Turbo Unboxing | BMW E30 M20B30 Turbo build
Вставка
- Опубліковано 8 вер 2024
- here is my new Borg Warner s257sxe that I will be using on my e30 3L m20 build. enjoy
My Car Parts list
Megasquirt: amzn.to/3FX5rIg
Wideband: amzn.to/3xH3ltf
Intercooler: amzn.to/3xJAnJs
LS Coils: amzn.to/3rr1SGq
Turbo: amzn.to/32Pkt4P
Injectors:amzn.to/3d5UZlG
Fuel Pump: amzn.to/3ruzfZ7
Camera Setup
Body: amzn.to/31gOUAq
Lense: amzn.to/32HVro1
Camera mic:amzn.to/2ZEvC79
Mic:amzn.to/3d3RYCc
USB audio:amzn.to/3Iko635
Thats my new set up
s257 sxe .82 ar t3 on m20b25
Running 1.7 bar it made 502 whp and 685nm
at 3.8k rpms it has 590nm..
that turbo is a beast
I just ordered this same turbo with a T3 flange AR 1.00 housing for BME E21 320i with an 1.8 m10, I went with the large housing due to being able to rev to 8k+ rpm. I should be able to see around 480rwhp at the wheels with a cam and valves/springs up top on e85. I am using a twinscroll cast manifold from kangaroos team to really get the most out of that turbo, I am always impressed with how well BW turbos quality is and their performance.
When you get it running share a video I would love to see your build ! M10s are awesome
Please update with the results when you can!
Trying to decide between the 252 and 257 for my 10:1 comp M54B30.
For a B30 definitely go with the 257. It will give you headroom with very similar spool
I bought the bw s252 sxe with agp T3 .82 ar housing for my m20b25 forged bottom end build
What do you think about that turbo?i will run it with pump gas and methanol
I hope it goes to 500 hp,..is that possible?
The s252sxe is rated at 525hp at the crank. The 257sxe is rated at 650hp at the crank.
@@TurbineResearch some sale companies rated that turbo at 55lb/min and some 57lb/min
Does the vband outlet work with stardard vbands
Borgwarner uses marmon flanges you need to buy and adapter or cut and weld on a vband
Can you post the link for the add on for the flange please?
amzn.to/3Beq3wb
Thanks dude! Sticking one of these on my rb26 hopefully it’s as fun as it looks 😂
Precio 😊 que cuesta ....
The oil fittings sizes are -4an for feed and -10an for drain ?
Yes 4 an feed and 10 or larger drain
is that flange reduce to 3 inch from the exhaust side
Yes it's a 4.21" Marmon to 3"