How To Make Live Center ( FAST & EASY )
Вставка
- Опубліковано 30 лип 2024
- how to make lathe machine live center ( MT 2 ) very easy
i made a live center ( MT 2 ) for my lathe machine
i used iron rod 22 mm and ball bearing 607 fo this live center
thanks for watching .
please don't forget to like , subscribe , share and press the bell button if you enjoy the content .
Similar video :
• How to make Live Center
This is perfect for what i need! Gonna make one next week if i have time.
Gave me a few ideas for a problem that I need to get past. My good live centers don't let me get close to the end of the work but something like this could help, and If I extend the live portion out a bit I could get very creative. Those bearing cannot take a lot of axial load, but adding a small thrust bearing would help a lot.
I learned more in this video ťhen the last 100 I have watch. Great job, thanks
Thanks ;
Why 62° , and not 60 ? ... 😶
Would a small lip on the bottom of the spinning shaft help seat it against the bearing and leave a little bit of space between the spinner and the holder as a thrust washer kinda thing
Still a pretty cool build...simple and fast and does what it's supposed to...how accurate is it? Does it have much runout?
Thanks ❤️🙏
Its accuracy is good, maybe not very principled, but it gets the job done
Thank you
👌👌👌
👏👏👏👏
It looks like you used a beaver to chew that Morris taper
🙏Thanks for the point
That was easy
😍👌🏻
👏👏🌹
👍
❤️
perfect 👌
😍👌
Horiiiiit , che familet mord
😐
If you push anything with that center it will most probably lock out as you did not used any axial bearings. It's out of center and the finish quality is terrible with these diy cutters. You could achieve much better quality.
Of course ، thanks ❤️
😂😂😂
Good job but lilte rough
Tnx a lot 🙏❤️
Nice 😍🤍
measure wobbling 😂
👏👏🌹