How to insert and scale SVG in fusion360 with CNC plasma cutting.

[@southernjoes8372]

Thanks I knew there was an easy way to scale SVG's Thanks for keeping this info at bottom line upfront. Definitely worth the Subscribe

[@curtishatfield9629]

Merry Christmas to you guys. We appreciate the time you spend making these videos.

[@twoguysmakestuff4445]

Thank you! Merry Christmas!

[@recrdholdr]

I'd love to know how you set up the plasma cutter files for different thickness materials.

[@twoguysmakestuff4445]

We can do that. Thanks for the suggestion.

[@MAIKORAMIREZ-os3rq]

Hello thanks a lot for the video, do you use compress air to cut or gas like nitrogen?

[@twoguysmakestuff4445]

Compressed air.

[@cutweldngrind]

When you go to Tools are those cuttong presets in the program or are they entered. I am learning before I even attempt to buy a table.

[@twoguysmakestuff4445]

Those are pre set. We put those tools in ourselves.

[@kieranmcintosh4826]

Thanks for the great content. Do you guys put any additives into your plasma table water?

[@twoguysmakestuff4445]

Yes we do. We use a product called green cut in our water table.

[@daipower1]

Its really good that you do it start to finish including the fusion 360, there are loads of videos out there just on fusion 360 but not many showing the whole process. Do you have any videos of you programming the plasma cut parameters into fusion? Nice video, watching from Wales UK.

[@twoguysmakestuff4445]

Yes we can do that in our next video! Thank you for watching!

[@cesarparedes9834]

Thank you so much

[@curtishatfield9629]

Great information! What font type was the "Lonw wolf Lodge" done in?

[@albertoherrera4864]

What do you use to make the design of the thing you uploaded onto the fusion 360? Thanks!

[@twoguysmakestuff4445]

We bought it from a designer and then customized it for our needs. Etsy is a good source for SVGs.

[@albertoherrera4864]

@@twoguysmakestuff4445 Thank you man!

[@sincityhvacr]

do u give private or paid classes

[@chrisTiFur76]

Do you have a 45xp post processing file for fusion? Thank you

[@twoguysmakestuff4445]

We sure do, email us @ [e-mail] and I will share.

[@paranoid9419]

When I ask fusion to simulate after I select the pierce locations, the simulator does NOT follow the path I made. However, the G code provides the correct locations and works. Were frustrated, am I alone here? Anyone else have the same thing in simulator?

[@3523553]

Hello sir, can you please share the fusion file of Grable Gardens (see minute 13:17) thanks in advance

[@twoguysmakestuff4445]

email us at [e-mail]

[@3523553]

@twoguysmakestuff4445 I have send you an e-mail

[@3523553]

I have sent you an email