Thats a good question, I'm not really sure. I would assume you could make it fit with a little adjusting back and forth and teachnically, you could just not have the front crossbar if it is too close to the antenna.
Great video!!! Thinking of the same setup for my Tacoma. Quick question---is the height of the Cab Rack the same height as the rack on the SmartCap??? Looks like the rack on the SmartCap sits just a little bit higher from the photos I"ve seen.
Thanks for the comment! You are right, the Smartcap with its top rack is JUST slightly taller than the cab rack. It's not by much IMO but it is by about a 1/2 inch to MAYBE an inch.
@@HorizonBound Thank you very much for sharing that information! I watched this video to find out exactly that. I am installing a Prinsu Pro roof rack on my 3rd gen tundra and am searching for a rack to install on my Smartcap Evo Adevnture that will be at the same height as the roof rack on the truck. I am thinking Sherpa, or possibly trying to use their mounting feet or a similar design. I would like to keep it all CBI/Prinsu to match though, lol
Do you thing the long bed rack would clear the shark fin antenna if I install it on a short bed cap?
Thats a good question, I'm not really sure. I would assume you could make it fit with a little adjusting back and forth and teachnically, you could just not have the front crossbar if it is too close to the antenna.
Did the prinsu rack come with those square nuts for the smartcap or did you have to get those separately from somewhere
The square nuts came with the smartcap.
Great video!!! Thinking of the same setup for my Tacoma. Quick question---is the height of the Cab Rack the same height as the rack on the SmartCap??? Looks like the rack on the SmartCap sits just a little bit higher from the photos I"ve seen.
Thanks for the comment! You are right, the Smartcap with its top rack is JUST slightly taller than the cab rack. It's not by much IMO but it is by about a 1/2 inch to MAYBE an inch.
@@HorizonBound Thank you very much for sharing that information! I watched this video to find out exactly that. I am installing a Prinsu Pro roof rack on my 3rd gen tundra and am searching for a rack to install on my Smartcap Evo Adevnture that will be at the same height as the roof rack on the truck. I am thinking Sherpa, or possibly trying to use their mounting feet or a similar design. I would like to keep it all CBI/Prinsu to match though, lol
How high is the rack?
From the bottom of the feet to the top of the crossbars is 3 inches.
Need to know the dimensions of the rack
5.5FT x 54inches. This is the one I bought but there is a longer bed one if you need longer prinsu.com/product/universal-top-rack-5-5-x-54/
What’s the dimensions of this rack?
5.5FT x 54inches. This is the one I bought but there is a longer bed one if you need longer prinsu.com/product/universal-top-rack-5-5-x-54/