Thanks for this very well presented tutorial. I have used solidworks for many years and yet still found your tutorial very helpful. Thank you, well put together!
is it possible that you made a mistake in your simulation?i think you aplied the force and the fixture to the whole surface, in reality when you put a bolt to the hole the force would be only transmitted by the part of the surface witch is unter presure, there couldnt be any pulling forces. this would increase the stress on the outer part of the ring. Im not sure if im right, i could be that solid works acumilates for this, just something i noticed and wondered about
You're definitely right. By reducing the outer diameter he is making a dangerous modification which will reduce the strength of the component. A fact that was iterated several times during an FEA course during my engineering masters was that incorrect use of FEA software is dangerous because it will only ever test what you simulate. This video highlights the need for correct simulations and testing a manufactured part before using it in the real world.
cai876 That's why we have safety factor. Any designer knew that, you can't just take it for granted when you're trying to do any modification on your product, especially critical items. For me, simulation is one of the tools to help us to make decisions in our designs and need to combine the other tools such as calculations and field test to deign a safe product.
Thank you for the video! I have a question -what if I want to apply the force not on the surface but on the line, but not the edge line. How this can be achieved? How to add the force application line to the model?
Very Nice. How would I figure a high pressure vessel with this technology. I have a model. I want to know if it will fail at 25 K PSI at different points. Also, How would like to mount a pressure transducer and electron beam weld it to give me a linear response on the sensor on this model. I would to convert High Pressure to a Electrical output. I need to learn how to model this. Is there any examples this type of design. phil
I am confused. Why are the stresses not symmetrical? They almost certainly should be. Ignoring acceleration as this simulation obviously does, if the model is symmetrical then so should the stresses if forces are applied equally. Can someone correct me please.
Hi, I've an issue concernig applied forces. It seems that model deformation doesn't depends on applied force because I have the same result applying 1N or 1000N. Of course the values on the scale changes, but the model deformation is always the same... Am I doing something wrong...??? thanks in advance for your HELP!
Leiato33 solidworks changes the multiplier of the deformationstudy automaticly as Default. you Can Change the multiplier to your prefered Value in the settings of the deformationstudy studie
is it hard to make a simulation of a fan transferring flow of air in a machine to make it cool?? well, the machine is about 105C and the time of duration to cool it down is about 23 mins.. can solidwoks make that simulation? Please answer, thanks,
hello sir, I am Varun Singhal, from INDIA. I have designed scissor mechanism for compaction purpose in solidworks. Now i need to calculate the force it will exert on the material beneath it. But i don't know how to do it in solidworks.... Can You help me?
hi every one i hope we don"t need change any dimensions he used alloy steel in their simulation you should be try cast alloy steel the result will be fine.....
Santhosh Kumar I guess you've figured it out by now. But you sketch a half-circle. You then go ahead and use the revolve Boss function to rotate it using the line splitting the full circle as your axis.
your voice is pleasant, but i had to put u on 150% speed because you talk very slowly. Also, the tutorial is extremely basic, for people who've never touched SW
Thank you for the only explicit explanation of the stress analysis thus far compare to other analysis videos. :)
Best explanation on UA-cam for this topic. Thank you!!!
A perfect video and a perfect example to start learning simulation with SolidWorks.
Mate you've saved me so much time and effort. Seriously thank you
This was an excellent explanation, and covered everything that I had questions about. Thank you.
Thank you. This is the best video for SolidWoks that i have seen.
omg
you have a clear instruction of this tutorial
Thanks
Awesome video. My Solidworks course didn't cover FEA, but it looks simple enough to get into thanks to your explanation!
Thanks for this very well presented tutorial. I have used solidworks for many years and yet still found your tutorial very helpful. Thank you, well put together!
DAMN GOOD EXPLANATION!!!
Thank you a lot for interpreting with the simulation report.
I needed to apply a force in a face just like in your simulation, really helpful. Thank you.
This is very nice and simply explained, understood well. Thank you
Very easy to understand !!!!!
Thank you
Good excellent explanation,
Your Explanation is very helpful, Please make videos on SolidWorks 2020
Thank you
thank you very much for this useful video
yis viri uzful
your work is appreciable.Thanks a lot.
thank you sir,for giving an information and the way of explanation is good
Very good explained, thanks
Very well explained.
Thank you.
is it possible that you made a mistake in your simulation?i think you aplied the force and the fixture to the whole surface, in reality when you put a bolt to the hole the force would be only transmitted by the part of the surface witch is unter presure, there couldnt be any pulling forces. this would increase the stress on the outer part of the ring. Im not sure if im right, i could be that solid works acumilates for this, just something i noticed and wondered about
You're definitely right. By reducing the outer diameter he is making a dangerous modification which will reduce the strength of the component. A fact that was iterated several times during an FEA course during my engineering masters was that incorrect use of FEA software is dangerous because it will only ever test what you simulate. This video highlights the need for correct simulations and testing a manufactured part before using it in the real world.
cai876 That's why we have safety factor. Any designer knew that, you can't just take it for granted when you're trying to do any modification on your product, especially critical items. For me, simulation is one of the tools to help us to make decisions in our designs and need to combine the other tools such as calculations and field test to deign a safe product.
you're right, he must cut the surface using split line
Agreed
#CADCAMMastermind
VERY GOOD TUTORIAL THX
Thank you very much for this video.
Very well explained thank's so much
Very useful for me, thanks
good video!! thanks
thank you really nice presentation
very useful for my exams.hj.thank you
Nice video...thank you
best regards from Berlin
welldone nice work
thats very nice thax for information
thanks for demostration, could you made one with the steel conections, more precisly gusset plate
Thank you very very very much!
very helpful thanxx
please tell me why I can't Mesh and Run.I did exactly what in this video.please help me as soon as possible.thanks
Thank you!
Thank you for the video! I have a question -what if I want to apply the force not on the surface but on the line, but not the edge line. How this can be achieved? How to add the force application line to the model?
thanks you very much!!!
legend, my thesis was depending on this video
Great video. Now I am very interested to learn simulation.
#CADCAMMastermind
really great
thank you sir for video
Very Nice. How would I figure a high pressure vessel with this technology. I have a model. I want to know if it will
fail at 25 K PSI at different points. Also, How would like to mount a pressure transducer and electron beam weld it to give me a linear response on the sensor on this model. I would to convert High Pressure to a Electrical output. I need to learn how to model this. Is there any examples this type of design. phil
Thanks a lot
6:40 what do you mean by the normal 2 direction?
"normal to ... direction " the direction is perpendicular to the surface the force is applied.
I am confused. Why are the stresses not symmetrical? They almost certainly should be. Ignoring acceleration as this simulation obviously does, if the model is symmetrical then so should the stresses if forces are applied equally. Can someone correct me please.
It is symmetric.
Hi, I've an issue concernig applied forces. It seems that model deformation doesn't depends on applied force because I have the same result applying 1N or 1000N. Of course the values on the scale changes, but the model deformation is always the same... Am I doing something wrong...??? thanks in advance for your HELP!
Leiato33 solidworks changes the multiplier of the deformationstudy automaticly as Default. you Can Change the multiplier to your prefered Value in the settings of the deformationstudy studie
Wondering how making the fillet radius larger decreased the volume of the part?
great .thanks 4 that
please also post the video on simulation of assembly design also, because i want..
thanks for guide
Can you make a video on meshing of part and how to decide whether mesh is good or not?........
Thanks in advance.
#CADCAMMastermind
If you can't beat them, join them.
good luck in your new position
is it hard to make a simulation of a fan transferring flow of air in a machine to make it cool?? well, the machine is about 105C and the time of duration to cool it down is about 23 mins.. can solidwoks make that simulation? Please answer, thanks,
#CADCAMMastermind
plz upload conjugate heat transfer simulation for pcb in solidworks
thank u
Hello
I will try to do the simulation of a drum wui wound is wound by a cable
Anyone has the file for the video? Apparantly the domain is for sale. :P
can you perform mapped mesh in solidworks
#CADCAMMastermind
Would you please make a video for testing air flow of a fan shroud for a 3dprinter? Or can you recommend a tutorial? Thanks!
good
hello sir, I am Varun Singhal, from INDIA. I have designed scissor mechanism for compaction purpose in solidworks. Now i need to calculate the force it will exert on the material beneath it. But i don't know how to do it in solidworks.... Can You help me?
#CADCAMMastermind
hi every one i hope we don"t need change any dimensions he used alloy steel in their simulation you should be try cast alloy steel the result will be fine.....
how to draw a sphere using solidworks?
Santhosh Kumar I guess you've figured it out by now. But you sketch a half-circle. You then go ahead and use the revolve Boss function to rotate it using the line splitting the full circle as your axis.
yeah thank you..
This is nice, but the software seems to be incapable of meshing a geometry with any degree of complexity...
Tem alguém que possa falar em português Yam Fron Brasil
Title didn't lie
your voice is pleasant, but i had to put u on 150% speed because you talk very slowly. Also, the tutorial is extremely basic, for people who've never touched SW