How to Replace Rear Wheel Bearing 1998-2002 Honda Accord
Вставка
- Опубліковано 5 жов 2024
- Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ia/1ASH...
New Wheel Bearing & Hub Assembly Set from 1AAuto.com 1aau.to/ia/1ASH...
Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision. This video shows you how to install a new wheel hub and bearing on your 1998-2002 Honda Accord.
• Check here for more videos on the 1998-2002 Honda Accord: • Honda Accord 6th Gener...
This repair was done on a 2002 Honda Accord EX 3.0L and the process should be similar on the following vehicles:
1998 Honda Accord
1999 Honda Accord
2000 Honda Accord
2001 Honda Accord
2002 Honda Accord
Tools you will need:
• Pry Bar 1aau.to/od5/1AX...
• 14mm Socket 1aau.to/opd/1AX...
• Brake Caliper Piston Rewind Cube Tool
• Needle nose pliers 1aau.to/oca/1AX...
• Needle nose pliers 1aau.to/oca/1AX...
• 3/8 Inch Impact Gun
• Ratchet 1aau.to/oqo/1AX...
• Socket Driver
• Socket Extensions 1aau.to/opd/1AX...
• Torque Wrench 1aau.to/oiU/1AX...
• Copper Anti-Seize
• Liquid Thread Locker
• Paper Towels 1aau.to/obY/1AX...
• Rust Penetrant
• Center Punch 1aau.to/oaA/1AX...
• Floor Jack 1aau.to/oej/1AX...
• Hammer
• Jack Stands 1aau.to/odZ/1AX...
• Rubber Mallet
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Honda Accord 6th Generation 1998-2002: • Honda Accord 6th Gener...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
Socket sizes in your videos would be helpful
Thank you. I bought the bearings and rotors for under $120. Took me about an hour in a half to install them. The cheapest quote I got was $720 from a local shop. Robbery. That's for saving me a stack of cash. Very straight forward video.
Well done my friend. Appreciate the torque settings. You are a great teacher and you pointed out the critical points. Thank you.
This video is awesome and it worked for my 2000 accord with the v6 motor. Thank you for posting this video
This Video was awesome like each step in common terms. Easy to understand. And I just saved alot of money. Thanks Bro!!
that car is very rotten, but the video helps me a lot, thanks
Compared to mine that's clean
What would you replace by the looks of that
Thanks for the help
Very well done thanks for the help
Nice job!
I want someone to tell me if this brand of bearings is good? I have the same car that appears in that video and I need to change the bearings! And do I have a pair of that same TRQ brand in the eBay cart?
Hello Weldon, what size is the rear axle nut? Thanks and great video
front is 36 mm
Thanks
Excelente
Red thread lock? No way. That’s why you peen the retaining nut. With red thread lock You will have to heat up that nut to 500 degF to remove the nut.
Weldon. am gonna get me a torc wrench!
You replaced the whole wheel hub assembly not the wheel bearing. To replace just the wheel bearing is much harder.