Nice shout out to your old buddy Jessie, it's nice to see when good people are able to stick together throughout their lives, help each other out. You know one hand washes the other and both hands wash the face. Have a good one!
Nice maintenance welder, good choice for whitey. Also good to hear that the big 40 is in for a rebuild in your spare time. You will be glad to have it for heavy work.
Those are super welders !!! Perfect perfect perfect for your operation!!!! DON'T JUMP START that welder just replace your battery or charge it !! Don't know if you've been told that but it can damage the board in it.. unless miller changed things on these new ones . I'm sure you know but that's my two cents
I’m new to your Channel just sigh up . So how you like that trailblazer . I’m Service tech down in marble Falls Tx Area on welder . One thing on them welder . Don’t jump start one if the battery get week on you . Only trickle charge it . Or replace the battery . You blow your pc boards on it . I replaced few of them pc board on the Hobart and the Miller unit . I like the Miller Products . Have a nice day . Sir .
I just got one myself. It is a fifteen model with a mig suitcase and plasma cutter all on a small trailer. 50 foot of leads and the best thing is that it only has 40 hours on it. $3800 for the entire setup. Couldn’t believe it and couldn’t pass on it. I have been enjoying it for the past couple of weeks.
Ohhh those are nice! The "stiff" setting allows for a more aggressive arc when digging and gouging with 60xx rods and the "soft" setting works best for cap passes where you want better flow with less undercut,least that's how I say it. A dealer that knows the products they sell and can diagnose and service what they sell are worth their weight in Gold IMO.
I think chucke2009 did a review on one of those a couple years ago and really liked it. I was looking to get one but slowed down and really couldn't justify spending the money on one for the little bit I do and some functions I would never use. It's a nice machine. A hundred dollar machine is all I need to stick things together for me to get by with. Big things I got a welding shop right down the road and it gives me the chance to jaw jack and maybe a cold beer if it's late enough.
Maybe I didn’t scroll down far enough to see if someone answered you already but that arc control is also referred to as a dig function. Basically so you can dial it up to keep a tight arc with say a 6010 rod and keep it from stickin. Then you can tune it back for your caps with a 7018 or so. Never thought I’d see something so shiny on this channel!! Good for you buddy
Very nice indeed but extend the stack a bit and think about a heat shield with all the miles you drive. Servicing and access to operate look really good. Strong high quality back up is gold today. Some protection for the electrics from the wet long term I think would be wise.
Catfish moto haha I hear that I love them both I’ve got nothing but good things to say about both brands, wished other equipment was built like welders
Great welder Wade. Depending on how much you use it, you might consider getting a cover for it to help protect the electronics. It definitely is not as heavy duty and able to standup in bad weather as your old one. Just a thought.
What's the chance that you may add more higher of a exhaust on the truck so you don't get that awesome machine all dirty!!?? :) I can see you up there putting some wax on her!! : ))
Find yourself someone who can sew or an upholstery shop and have a cover made for it. Us truck tarp material. It will keep it nice and keep them electronics from having problems
I think if it were me, I would be putting an extension on "Whitey's" exhaust that is gonna be turning that pretty blue paint black. Also there is gonna come a day when you are fueling the welder on a cold day and "Whitey" will be a runnin'..............not real safe. (my opinion)
If that guy's the dealer you'd think he'd be a little more knowledgeable. Soft start is just less juice...just like some grinders. Hard is the opposite as you can imagine. Have fun Wade; ChuckE seems to like his!
Hey, happy Friday, hey you got a fresh one, excellent, it will last you for ever, guess stevie royalty checks paid for it, sure am glad Stevie decide to reinvest in the future of the company, hey make sure you tell mom thanks, have a great weekend,
You best bet an extension on whitey's exhaust. You'll ruin the appearance of your new equipment. White lighting had some wild pieces of exhaust. Get to cobbling.
What kind of motor is in that new welder Wade? That's the thing about fixing the old welder. You have to have a big old welder that can run balls to the wall to air arc.
That's a good price. I know you will be happy with it once you get use to it and we ( the public) will get some good welding vidjas. I love the Miller trailblazer we have at work. Have welded 1/2 inch plate back on the thumb mounting plate on a 320 trackhoe.
You will hate that thing ..wear your ass out running the heat up and down and up and down go ahead and get u a remote save u a lot of steps. ..301or 302 best they ever made
nice welder BUT how long will it stay looking good & still use it hmmmmmm Wade are you sure you can read remember you went to an Indiana school!!! hahaha
Tater, you know damn well you don't know how to use that welder properly. Now, I'd be willing to come up there and take that machine off your hands. Hell, I will even help you load that thing in MY truck, NO Extra Charge, just as a favor to YOU.....Okay, okay, you caught me in a charitable mood, I won't even charge you to haul that thing away. You're Welcome
Logger Wade I seen some of the best pressure welders here in Ab trying to spool weld alm, rigging is the only way to do it properly, just don’t rest your face against the work pieces if you got fillings and high frequency, Anne may like the results but the rest of us won’t be able to make you out again.
Ok after watching alot of these vidjas what the hell is a din din lmao. Im sure another nickname but its aggravating me to know why you call it that. Anyone?
Nice shout out to your old buddy Jessie, it's nice to see when good people are able to stick together throughout their lives, help each other out. You know one hand washes the other and both hands wash the face. Have a good one!
Seen a lot of these at the Ritchie Brothers auctions on another channel but that was in 2021.
I'm glad you bought a brand new welder/generator Wade,smart move.It looks really nice too.
You will love that Miller welder, bought one about 3 years ago, its a working SOB and have had no problems with it at all !
Beautiful welder Wade your gonna love it ! You can do a everything with that machine! Congrats! Thanks for sharing bud 👍
Nice maintenance welder, good choice for whitey. Also good to hear that the big 40 is in for a rebuild in your spare time. You will be glad to have it for heavy work.
really like the guys at arcweld. really like the Mexican restaurant next door to them, seems they both get alot of my money. lol
Those are super welders !!! Perfect perfect perfect for your operation!!!! DON'T JUMP START that welder just replace your battery or charge it !! Don't know if you've been told that but it can damage the board in it.. unless miller changed things on these new ones . I'm sure you know but that's my two cents
I’m new to your Channel just sigh up . So how you like that trailblazer . I’m Service tech down in marble Falls Tx Area on welder . One thing on them welder . Don’t jump start one if the battery get week on you . Only trickle charge it . Or replace the battery . You blow your pc boards on it . I replaced few of them pc board on the Hobart and the Miller unit . I like the Miller Products . Have a nice day . Sir .
well dam Wade. im here just looking at info on a trailblazer cause i just left ArcWeld in Mitchell. crazy to find another local youtuber.
Haha hey buddy I'll check your channel out
I just got one myself. It is a fifteen model with a mig suitcase and plasma cutter all on a small trailer. 50 foot of leads and the best thing is that it only has 40 hours on it. $3800 for the entire setup. Couldn’t believe it and couldn’t pass on it. I have been enjoying it for the past couple of weeks.
Glad for you that big mama got talked around to buying now you have just got to show you deserve it, keep up the good work.
Ohhh those are nice! The "stiff" setting allows for a more aggressive arc when digging and gouging with 60xx rods and the "soft" setting works best for cap passes where you want better flow with less undercut,least that's how I say it.
A dealer that knows the products they sell and can diagnose and service what they sell are worth their weight in Gold IMO.
Steamfan71 thanks bud that helped a bunch
Hey Wade, extend your exhaust pipe just above your welder, to stop soot from clogging up the welder's filters & alternator wiring!
That's quite a nice machine Mr Wade. Hope it takes care of your needs.
Great great rig, burned many a rod weldin bridge decks using trailblazers, good choice buddy
New welder means time to put it too work have fun and enjoy great piece of equipment
I think chucke2009 did a review on one of those a couple years ago and really liked it. I was looking to get one but slowed down and really couldn't justify spending the money on one for the little bit I do and some functions I would never use. It's a nice machine. A hundred dollar machine is all I need to stick things together for me to get by with. Big things I got a welding shop right down the road and it gives me the chance to jaw jack and maybe a cold beer if it's late enough.
New toy?! The Trailblazers are good machines. So much for the Big 40. 😉
wow its like x mas all year for you!! always getting the nice toys to play with lol.
larrry meyers I know it’s hard on a guy but it’s a living I suppose
Great video Wade thanks for sharing nice welder
Miller makes a good welder.
Wade that is a dilly of a welder, glad to see you are going to fix the old welder that's a smart thing to do.
Very nice good luck with it 👍
I jumped when he went on hi speed in Vija, thinking it was on the way down to the floor💪
Maybe I didn’t scroll down far enough to see if someone answered you already but that arc control is also referred to as a dig function. Basically so you can dial it up to keep a tight arc with say a 6010 rod and keep it from stickin. Then you can tune it back for your caps with a 7018 or so. Never thought I’d see something so shiny on this channel!! Good for you buddy
Ryan Hadden haha thanks buddy that helped a bunch
Very nice indeed but extend the stack a bit and think about a heat shield with all the miles you drive. Servicing and access to operate look really good. Strong high quality back up is gold today. Some protection for the electrics from the wet long term I think would be wise.
Great welder you will love it
Awesome vidja Wade. I can see you putting a heat shield between that exhaust and welder. Later
A service truck that services itself. Pretty neat.
The Metal Butcher, that's how you know Whitie is a boy.
Lmao.
Gotta love good equipment!
Well wear Wade:)
Yea what Dan Whiteford said. LOL! Nice welder Wade.
an old man once told me Miller's for drinkin and Lincoln for welding
Catfish moto haha I hear that I love them both I’ve got nothing but good things to say about both brands, wished other equipment was built like welders
Logger Wade I don't have much experience with either brand I just thought it was a funny saying
Yeah!
Now yah gotta work,
And harvest more n pallet stock timber.
But that'll be great for yah.
Your second love always been welding.
Enjoy
Superman 68 haha guilty as charged
don't mind watching you spend your money at all. looks like a nice rig.
Cool video Wade , Better extend your stack or your new welder is gonna have a black streak
Just like a kid. Got to show off his new TOY!!!! I would have too.
Great welder Wade. Depending on how much you use it, you might consider getting a cover for it to help protect the electronics. It definitely is not as heavy duty and able to standup in bad weather as your old one. Just a thought.
loadpin There was a box sitting on top of unit that said protective cover. I believe he is covered! :-)
Yup boys I’m on it thanks for the heads up
Nice new toy, might need to extend the truck exhaust though
Hey you need to turn the Ext tip around on the welder it will fill the motor fill of water when it raining going down the road.
Danny Mathis yup got ya thanks bud
Nice welder Tater. You'll have to learn Stevie on it. He perty good welder too.🙃
Soft makes it dig into the metal higher the number more it gets down in there . The stiff builds up the metal makes it pile it up more.
Nice unit right there.
About time u bought a good welder tight ass. Hahaha.
Love u logger wade and video's
Rick Willie alright alright... you talked me into it lol
EFI small engines take a load a hell of a lot better than a non EFI small engine
Pat Pikulski thanks bud that’s nice to know
My boss just bought one $6200. It sits on the side of a utility body pickup truck now.
Nice looking welder that should take care of you fellers
Oh shit!! would you look at that!!! Very niceee
What's the chance that you may add more higher of a exhaust on the truck so you don't get that awesome machine all dirty!!?? :) I can see you up there putting some wax on her!! : ))
Buckin Right420 prolly gonna have to
You did not get that did ya. Wow nice
Is that the welder you wanted $250 the other day?LOL
Wow, if that ain't the cats poot! Drivers gotta have nice toys and mamma knows your a hard working rascal. Like a late Christmas.
add some height to the stack-holy sheet-ur gonna smoke that brand new welder-i-yi-yi.
I had that itch strapped to my deck and was nervous taking to the job site. Worried it may fall off for some odd reason.
pill28 haha I know what you mean
The welding kid in the "candy store"!!!!! (LOL)
Hey, happy Saturday, lol, harbor freight 110, lol you know it, have a great weekend,
Another quality Wisconsin product. We do make more than cheese!
Find yourself someone who can sew or an upholstery shop and have a cover made for it. Us truck tarp material. It will keep it nice and keep them electronics from having problems
Chris Edge The cover for it is in a box laying on top of the welder, you can see it before the welder was put in the back of the silver service truck.
Mike Willis good good lol. As much as that thing cost it should come with one.
I bet if you let Stevie use it he will leave it on the "hard" side. I heard thats what he likes! :)
John Spencer bamm
I think if it were me, I would be putting an extension on "Whitey's" exhaust that is gonna be turning that pretty blue paint black. Also there is gonna come a day when you are fueling the welder on a cold day and "Whitey" will be a runnin'..............not real safe. (my opinion)
I bet that wasn't cheap. Gonna take a,tree or 3 to pay for that haha. Nice machine though
momma bear going to get you for buying that miller last i heard she was not going to buy one
matt phillips shhh what momma don’t know won’t hurt her
If that guy's the dealer you'd think he'd be a little more knowledgeable. Soft start is just less juice...just like some grinders. Hard is the opposite as you can imagine. Have fun Wade; ChuckE seems to like his!
If your interested in it a friend of mine has a suitcase for one of those he might sell it's hardly ever used
Andrew Maas hey I got one but might look into it
I will talk to him and see what he says
I see Big Momma listened ;)
Hey, happy Friday, hey you got a fresh one, excellent, it will last you for ever, guess stevie royalty checks paid for it, sure am glad Stevie decide to reinvest in the future of the company, hey make sure you tell mom thanks, have a great weekend,
John Deere 26 haha if I had to cash in stevey’s royalty checks I’d be shopping for a 110 welder at harbor freight
You best bet an extension on whitey's exhaust. You'll ruin the appearance of your new equipment. White lighting had some wild pieces of exhaust. Get to cobbling.
What kind of motor is in that new welder Wade? That's the thing about fixing the old welder. You have to have a big old welder that can run balls to the wall to air arc.
Joel Adank it’s a Kohler
I think 25 horse air cooled like a lawn mower
Logger Wade ok Thanks
Gotcha. Thanks
Don't let Stevie touch it he'll break it
Nice!!...too nice maybe? Go find a couple low branches and get some scratches on this rig! Hard to beat a new toy. I mean tool...
readygottago19 haha
It will take a while to read the book to learn how to run that
drew Douglas oh man not reading
Holy hecky. Your Momma sure spoils you, Tater. Mercy. lol
How much did you have to sweet talk big momma? That is a nice looking rig.
Andy Yokley 6600
That's a good price. I know you will be happy with it once you get use to it and we ( the public) will get some good welding vidjas. I love the Miller trailblazer we have at work. Have welded 1/2 inch plate back on the thumb mounting plate on a 320 trackhoe.
Why is there no emoji to show "drooling"???😜...damn! She FINE!
Samuel Luria haha oh yeah!!!
Jesse . . . we cut trees together.
Your not going to fix the old one?
Todd H yeah I’m fixing the big 40 on my spare time
Nice
that should have u fixed right ul
S Woods 899*ì (
You will hate that thing ..wear your ass out running the heat up and down and up and down go ahead and get u a remote save u a lot of steps. ..301or 302 best they ever made
man oh man, big mama must really like you. she got you a new welder. SO stop BS ing, and start welding
cuznjo1 told jessy I’m gonna go get some gas and start welding things wether it needs welded or not
really nice machine. build a Eiffel tower in the yard. enjoy using it
nice welder BUT how long will it stay looking good & still use it hmmmmmm
Wade are you sure you can read remember you went to an Indiana school!!! hahaha
mean joe green a-e-I-o-u- and sometimes y
lmao, yeah something like that
good thing you have young ones to use as a refresher course
i sure miss mine
Tater, you know damn well you don't know how to use that welder properly. Now, I'd be willing to come up there and take that machine off your hands. Hell, I will even help you load that thing in MY truck, NO Extra Charge, just as a favor to YOU.....Okay, okay, you caught me in a charitable mood, I won't even charge you to haul that thing away. You're Welcome
CumminsDslPwr since you put it that way I don’t have much of a choice but to get rid of this thing
I am just trying to help you out my friend, I was ONLY thinking of YOU.
I better get my narrow ass up there quick before you come to your senses. LOL
Oh Shit Tater gonna be tiggin now, it's gonna get real now
DLK HAY oh man you ever seen a person dance with two left feet??? That’s how I look Tiging aluminum
Logger Wade I seen some of the best pressure welders here in Ab trying to spool weld alm, rigging is the only way to do it properly, just don’t rest your face against the work pieces if you got fillings and high frequency, Anne may like the results but the rest of us won’t be able to make you out again.
Ok after watching alot of these vidjas what the hell is a din din lmao. Im sure another nickname but its aggravating me to know why you call it that. Anyone?
Jacob _6420 It's his Cat Excavator (Track Machine) with the grapple and grapple saw on it, his kids called it "Din Din" and the name stuck.
Mike Willis thanks i knew it was the cutter i just wondered why in the world it got the name din din. Thanks for letting me know man
Did not get anything out of your video!
Sorry Bobby in working on it
Welder Wade
Shiny
Nice one 😂😂😂😂😂
Wade go red !!!!
BLUE!!!😂
Hey I love both if they made regular equipment outa the same stuff Lincoln and Miller uses stuff would last for ever
True! I just enjoy the fun of picking sides in stuff that doesn't matter too much....it's like sports, Lol😂.... just a way of breakin' horns....😜.....
Logger Wade nothings made to last anymore just had a new roof put on today the shingles they took off were put on in 1985 no leaks
Samuel Luria both good welders use miller at work Lincoln at home
Nice