In this video I demonstrate how to create custom Sampler instruments easily, quickly, and with minimal programming, using Auto Sampler in Logic Pro. Support the sponsor of this video, Boombox | bit.ly/boomboxsponsor For mixing/mastering work, contact me at my website | carneymediagroup.com Follow MusicTechHelpGuy on Instagram | instagram.com/musictechhelpguy Support the channel on Patreon | patreon.com/musictechhelpguy Timestamps: 0:00 Instruments & Summing Stack 2:07 Auto Sampler 6:12 Sponsor Segment 7:03 Sampler, Envelope 9:02 Sampler, Loop Zones 12:47 Final Result
Hi, I had a little issue with my Logic and wanted to know if you could help me with that. So, I'm trying to record MIDI percussion, using the native library that comes with Logic, but when I load the "Blocks and Bells Performance" patch, and I load "Sampler" in "Multi output" mode, it doesn't assign the single instruments such as Jamblocks and Cowbells to the right outputs, it all stills coming from the main outputs, I already checked than all the Groups Outputs into Sampler where assigned correctly, but it doesn't seems to work. I found it weird because when I do the exact same process with the "Conga Performance" and "Timbales Performance" patches, it does recognize all the assigned outputs in "Sampler" and it works perfectly, I hope you guy can help me!
Amazing video as always and well explained. I have to make a Tune for University using the Sampler and I've moved from Ableton to Logic and never use samplers in my Trance tunes so this is worth its wait in gold to help me use Logics sampler, so Thank You. Can I ask in Ableton when I was making tunes the Chords were really easy as its chose a Key then fold it so can never hit a wrong note. What's the closest Logic has to this to help me not hit a wrong note??? Thank you in advance @MusicTechHelpGuy !!
Thank you so much for this video! I've used SampleRobot for my external MIDI gear but this looks much more powerful. Your Logic Pro X videos are the gold standard!!
Thank you for this! I know for comments it’s old but I watched this when it came out and tried it. But yesterday I happy accident ‘d upon a stack of patches I wanted to capture. Concerned I might not get them all saved and the setup as a whole, I looked this back up and grabbed it with fine detail. Thanks for your work!
Excellent tutorial as always. I have been wanting to check out the auto-sampling function in Logic and now I don't have to dig through the manual to figure it out. I was thinking of using it with hardware synths but it never occurred to me to try it with a stack of soft synths. Brilliant! Thank you very much! BTW, if you were to make a video demonstrating the workflow with hardware I would be all over that. 😎 You rock man!
Auto sampler had passed me by! This is great. Only last week I had the problem of a Reaktor instrument that didn't like my M1 Mac based MainStage rig, and I need that sound for a gig so I sampled it the long way,
Nice video. And nice sound, it could be great in an intro for a song called "Enjoy The Silence" 😄 I know you wanted to keep it simple but you could have used the reverb tail of the samples with a release triggering.
Yeah, the point is to do whatever you want to do with the effects. Whatever sound design you like. You can even add MIDI FX and it'll sample the sound of the MIDI FX.
Ok, so I've auto-sampled an instrument and once in sampler - Is there a way to turn on loop mode and adjust the loop region for all samples in the instrument at once or do I have to do it on every single key individually? I tried highlighting all the keys and turning it on, doesn't seem to work. If there's a way I'd love to know, thanks!
Question I see You use the auto sampler for software instruments can You use it with audio becuase I wanting to create a sample instrument out of glass bottle with velocity layers about 10 of them So the instrument has dynamics how would you go about that can you still use auto sampler to do that with audio thanks and please do more videos about creating your own sampling using sampler thanks God Bless
This is strange. I auto sample something. I load sampler and go to the top and go down and i have no auto sampler...... LOL this is strange.. I have did it before many times. just poped back in for a refresher. it gone from the list....
Is there a way to use Auto Sampler with external synths? I tried it with my Moog Matriarch and Auto Sampler did play through the process but no audio files were created. It would be an interesting way to use Moog sounds in full polyphony. I've created sampled instruments with the Moog by recording each key separately but it would great to do it automatically.
Hi, I had a little issue with my Logic and wanted to know if you could help me with that. So, I'm trying to record MIDI percussion, using the native library that comes with Logic, but when I load the "Blocks and Bells Performance" patch, and I load "Sampler" in "Multi output" mode, it doesn't assign the single instruments such as Jamblocks and Cowbells to the right outputs, it all stills coming from the main outputs, I already checked than all the Groups Outputs into Sampler where assigned correctly, but it doesn't seems to work. I found it weird because when I do the exact same process with the "Conga Performance" and "Timbales Performance" patches, it does recognize all the assigned outputs in "Sampler" and it works perfectly, I hope you guys can help me!
In this video I demonstrate how to create custom Sampler instruments easily, quickly, and with minimal programming, using Auto Sampler in Logic Pro.
Support the sponsor of this video, Boombox | bit.ly/boomboxsponsor
For mixing/mastering work, contact me at my website | carneymediagroup.com
Follow MusicTechHelpGuy on Instagram | instagram.com/musictechhelpguy
Support the channel on Patreon | patreon.com/musictechhelpguy
Timestamps:
0:00 Instruments & Summing Stack
2:07 Auto Sampler
6:12 Sponsor Segment
7:03 Sampler, Envelope
9:02 Sampler, Loop Zones
12:47 Final Result
Hi, I had a little issue with my Logic and wanted to know if you could help me with that.
So, I'm trying to record MIDI percussion, using the native library that comes with Logic, but when I load the "Blocks and Bells Performance" patch, and I load "Sampler" in "Multi output" mode, it doesn't assign the single instruments such as Jamblocks and Cowbells to the right outputs, it all stills coming from the main outputs, I already checked than all the Groups Outputs into Sampler where assigned correctly, but it doesn't seems to work. I found it weird because when I do the exact same process with the "Conga Performance" and "Timbales Performance" patches, it does recognize all the assigned outputs in "Sampler" and it works perfectly, I hope you guy can help me!
Amazing video as always and well explained. I have to make a Tune for University using the Sampler and I've moved from Ableton to Logic and never use samplers in my Trance tunes so this is worth its wait in gold to help me use Logics sampler, so Thank You.
Can I ask in Ableton when I was making tunes the Chords were really easy as its chose a Key then fold it so can never hit a wrong note. What's the closest Logic has to this to help me not hit a wrong note??? Thank you in advance @MusicTechHelpGuy !!
Brilliant tutorial. I've been interested in this for ages, but have never seen it explained so simply. Thank you.
Thank you so much for this video! I've used SampleRobot for my external MIDI gear but this looks much more powerful. Your Logic Pro X videos are the gold standard!!
Dude this is amazing. Thank you
As always underrated lesson. I've watched lately your 6years old videos about compressor sidechaining. F.....g awesome.
Awesome! I love ideas like this that use Logic in extended ways and I’ve been meaning to learn and use auto-sampler. Thank You!
Thank you for this! I know for comments it’s old but I watched this when it came out and tried it. But yesterday I happy accident ‘d upon a stack of patches I wanted to capture. Concerned I might not get them all saved and the setup as a whole, I looked this back up and grabbed it with fine detail. Thanks for your work!
Excellent tutorial as always. I have been wanting to check out the auto-sampling function in Logic and now I don't have to dig through the manual to figure it out. I was thinking of using it with hardware synths but it never occurred to me to try it with a stack of soft synths. Brilliant! Thank you very much! BTW, if you were to make a video demonstrating the workflow with hardware I would be all over that. 😎 You rock man!
Look at all them red hearts! ❤❤❤❤🎉
Amazing capabilities in Logic.
Thanks,
Gianni
Thank you very much, I really needed to see this.
Auto sampler had passed me by! This is great. Only last week I had the problem of a Reaktor instrument that didn't like my M1 Mac based MainStage rig, and I need that sound for a gig so I sampled it the long way,
Fabulous video and I’ve sent this to a few Logic buddies! Great stuff! Love the new sound you created here!
Wow! I didn't even know that Logic can do this...thank you so much!
Great teacher
Excellent tutorial….thankyou so much for sharing your knowledge. 👍🏻👍🏻😊
Outstanding tutorial as always.
Wow. It’s full on.
Excellent tutorial as usual.
Thank you!
this is an awesome technique!
Thank you! I will try to create my own sound later on 💪
Excellent, thanks man :-)
Such an excellent video. Thank you 🙏
Amazing! Thank you always!
Woa! Marvellous!
outstanding...
very cool
Merci!
Eventide 😍
Bravo
Wow! Thank you 👍
I also find this useful to just tweak some default instruments
Nice video. And nice sound, it could be great in an intro for a song called "Enjoy The Silence" 😄
I know you wanted to keep it simple but you could have used the reverb tail of the samples with a release triggering.
Yeah, the point is to do whatever you want to do with the effects. Whatever sound design you like. You can even add MIDI FX and it'll sample the sound of the MIDI FX.
will you do an episode on how to easily set up 808s
Ok, so I've auto-sampled an instrument and once in sampler - Is there a way to turn on loop mode and adjust the loop region for all samples in the instrument at once or do I have to do it on every single key individually? I tried highlighting all the keys and turning it on, doesn't seem to work. If there's a way I'd love to know, thanks!
can i also do that but with different velocity to have dynamic velocity?
Question I see You use the auto sampler for software instruments can You use it with audio becuase I wanting to create a sample instrument out of glass bottle with velocity layers about 10 of them So the instrument has dynamics how would you go about that can you still use auto sampler to do that with audio thanks and please do more videos about creating your own sampling using sampler thanks God Bless
The auto sampler isn't saving my effects--do they need to be on the summing stack as opposed to the individual instruments?
does it write the loop modification to the aif file
suuuuupeeeeeer!!!!!
RESAMPLING !!!!
This is strange. I auto sample something. I load sampler and go to the top and go down and i have no auto sampler...... LOL this is strange.. I have did it before many times. just poped back in for a refresher. it gone from the list....
Is there a way to use Auto Sampler with external synths? I tried it with my Moog Matriarch and Auto Sampler did play through the process but no audio files were created. It would be an interesting way to use Moog sounds in full polyphony. I've created sampled instruments with the Moog by recording each key separately but it would great to do it automatically.
Hi, I had a little issue with my Logic and wanted to know if you could help me with that.
So, I'm trying to record MIDI percussion, using the native library that comes with Logic, but when I load the "Blocks and Bells Performance" patch, and I load "Sampler" in "Multi output" mode, it doesn't assign the single instruments such as Jamblocks and Cowbells to the right outputs, it all stills coming from the main outputs, I already checked than all the Groups Outputs into Sampler where assigned correctly, but it doesn't seems to work. I found it weird because when I do the exact same process with the "Conga Performance" and "Timbales Performance" patches, it does recognize all the assigned outputs in "Sampler" and it works perfectly, I hope you guys can help me!
👍👍👍👍👍👍👍👍👍
Ill never get there... ho hum
TY, Subbed
Does anyone know how to set up the ohh to cut off when u trigger the closed hh?
Great question. I made a video on this topic here: ua-cam.com/video/k8H3dkAAHv4/v-deo.htmlfeature=shared
🙌👏👏👏👏👏🏆
😍🥰😘