強くて軽いブラケットの作り方。How to make light and high-strength brackets.
Вставка
- Опубліковано 4 вер 2023
- フレームにパーツを取り付けるためのブラケット。単純なパーツですが軽くて耐久性の高いブラケットの製作は、意外と手間がかかります。Brackets are used to attach parts to the frame. Although a simple part, the production of light and durable brackets is surprisingly time-consuming.
46works Official Goods Shop(Tシャツ販売中)
46works.booth.pm/
Sub-channel 46works LIFE (サブチャンネル 46works LIFE)
/ @46workslife96
チャンネル登録はこちら↓(Please subscribe)
/ @shiroh73
46works.net
/ 46works
/ nakajima46
/ 46works
#custombike #46works #CafeRacerBuild - Авто та транспорт
46さんのお仕事はホントに丁寧で、テロップには出てこないですけど、ブラケット裏側のボルトの向きがちゃんとしてたり、単に穴あけするにも先ずはセンタードリルで位置決めするとか、そういうところも作品同様に素晴らしいと思います。それにいつも作業場がキレイ。大事ですね。
コストは掛かりますが、とても丁寧なお仕事で感心しました。
素晴らしいですね。
Very nice! I use the same process, except I've stopped using standard plated nuts: my local industrial fastener vendor sells bare, un-plated nuts - I keep a small quantity on hand for welding. More recently, I purchased nuts which are designed specifically for welding. They come in a variety of shapes. I've chosen a wide flange which can easily be modified to fit inside square stock. They work great, and the weld heat never damages the thread.
溶接は何度も同じ場所にやり直し出来ないし。一発で決キメる🤩………凄い職人技👍
僕のバイクはハーレーなんですが、純正のステーは
穴開きの板がペッとくっついてるだけで溶接もボテボテです。
46さんのステーの方がずっと純正のようで
とても機能的美感がありますね。
勉強になります。
when a simple bracket becomes a piece of craftsmanship you're in safe hands
I always use a countersunk screw to center the nut over the hole.
Ahhhh Shiroh! Nice design work from the humble square tube, sort of universal and custom fitted too. Thank you inspired again. Jerry In Everett Ontario Canada
ボール盤主軸の回転音や、フライスの切削音が、BGMと相まって癒やされましたー😆
It's quite relaxing watching a master at work! Nicely done Sir.
It seems to be simple parts of the motorcycle, but essential for easy assembly and durability. As always, nice to watch your videos, very relaxing. Greetings from Brazil.
Wow I see that you are working on a OIF Triumph. Are you going to film the built and show and post it on your channel?
Making simple parts well is so satisfying! Nice tip to use a tapered bolt. Keihin CR carbs on a triumph twin?? That's cool.
いつも丁寧で綺麗な仕事が見ていても大変気持ちよく感じます
どこにでもある材料で最高に機能的なモノづくり！！これぞプロですね！！めちゃ参考になりました！
いつも動画楽しみにしてます！！
Looking forward to seeing the rest of that Triumph build.
Much better than factory ones.
Confrats.
That would’ve taken me five minutes to draw up in solid works and five seconds to cut it out on a waterjet.
when u start the tig i automatically averted my eyes from the monitor
So many time for a perfect piece ! Very nice !
Tappered bolt idea is good. Thanks
eager to watch mr.shiroh works 👍🏼
love the detail
A master of details; great job 👍
Hi Shiroh! Nice work, again! It’s inspiring and relaxing to watch you work. Off topic question, why did you add a separate oil tank to an oil in frame Bonneville? Will you make a video of this bike?
que belo trabalho amigo...parabens😀
lot of good jobs, well done!
Awesome stuff, I have the same centre punch 👊
Molto bello è un piacere vederti lavorare, mi rilassa e mi diverte penso di aver guardato tutti i video, anche io sono molto appassionato di questo lavoro, e ho qualche progetto in mente.🤞
Dear Lord, that's a lot of work.
big master!!! comba!!👍👍👍
これは芸細👍
👍 thanks... btw what bike is this ?
stuffs looking interesting
Great!
Beautifully illustrated bracket process. I hope we get to see more of that Triumph.
จริงๆครับผมอดีตแฟนเก่าค่าแชร์..🥰🥰✌
Bad Obsession Motorsport would approve. 👍
perfect.
beautyfull !!! magnificent !!! you re the best !! if you need an apprentice I'm here !! 😀😀
Nice
👍nice
ok, but i don't have any of those tools...no mill, no cut-off saw, no TIG.
Hmm, it looks like a bit over complicated proces for me, it's a just piece of bent sheetmetal, easy to make with basic tools. On the other hand such a design is used common in series production motorbikes and looks a bit too standard in custom built motorbike.
You can do this way faster with a sheet metal brake. Drill and tap the hole with a flowdrill.
Did I miss an episode? Are you building a triumph??
Marocco ❤❤
1:21 what pencil is it?
お、自宅でもできるかなって思って見たらフライス盤やらtigやら出てきてなんの参考にもならんかったｗｗｗ
👍👍👍👍👍
👌👌👌👌👌👌👌
естетичне задоволення.
What voltage do you have over there? 240v? Send me your address. I am willing to send you a bright light bulb for your workshop. 😉
溶接はロウ付けで代用可能、鉄板の形はグラインダーで切り出し可能。ホムセンのバイスや電動工具が有れば同じ物が作れる。
後は個々人の腕次第。
"promo sm" 🌷
ブラケットのネジ穴位置は、フレームの芯とかそれと接続するカウルやらの位置から逆算し、寸法を自分で見つけ出さねばならない。いざ溶接してみたら部品の位置が合わずに付きませんでした、なんてね。
これも、個々人の腕次第。