I recently replaced the sensor on the oil filter (it was damp), at the same time I replaced the head sensor too. the fun began ! I eventually put the old sensors back, and the oil light stayed off. I have a gauge, so I know the oil pressure was good, always. At the end of the day the sensor on the head (the new one) was faulty ! There is no guarantee with a light on a dash and the oil pressure gauge saved my bacon ! BTW I also have a volt meter so I know if the alternator is charging and I can see battery condition.
Thanks I will follow I almost sold my bakkie had the pressor test and just going to change my oil filter it going to make a big,if I hai to do oil pump ja Manny dollar gone thanks
Morning I got VW golf 3 they overall enjin but my oil light is coming on they didn't replace the oil pump and the cluster is making a noise I put new oil pump but it's still making noise
Hi I got VW golf 3 1.8 I overall engen and they didn't replace oil pump and my oil bazzer is making noise I replaced oil pump but it makes the same thing what can it be
I drive an old vw Polo classic 1.4i. The oil light and buzzer came on and the car started to over heat quickly. What could the problem be and how do I fix it? I checked the oil and it is full but the oil light flashers without the buzzer all the time when driving over 2000rev. But the heat gauge climbs quickly and over heats badly
But my MK1 beep that oil light when my fuel is quarter empty... And if my fuel is more the sound beep doesn't appear until it reaches quarter empty fuel
Hello sir my car is always doing things like that for everyday when I reach 100 when I'm driving is indicates that light for oil so I failed to understand what's going on I have been going to some mechanic and ask what's going on here they don't see any problem
My Mk2..I replaced both sensors..but at normal operation temperature I am getting oil buzzer at more than 2000rpm when driving..but when rev it it doesn't..and then when idling also there is an oil light blinking
Hi. If you have already replaced the sensors and still getting oil buzzer, it could mean actual low oil pressure due to your oil pump maybe packing up, or it could be the oil pick up is just bit clogged up with sludge,. And to solve that u need to take off the sump and do an inspection, and clean out the sump. What grade of oil you using?.. Using too thin oil also causes oil buzzer to come on.
Got a 1.3 chico with 1.4i harness... I have like 5 or 6 wires comes out of that section u cable tied on this vid for the sensors... I dont know how to track the correct wires
When last did u change the oil filter?... Sometimes it gets clogged up with sludge and you have a drop in oil pressure ,... Or a bad quality oil filter also causes that.. Also the oil pick up can get clogged up due to sludge in sump.. Always good to open up the sump from time to time to inspect..
@@pjs-golfmk1-diy I service the car every 10000km wiyh gud filters and 5w40 oil there's no funny sounds the car still runs fine / strong its just the light and buzzing sound
@@markmeyer7384 check on the wiring connecting to the oil sensor switches if it's not maybe bare wire touching engine.. Or could maybe issue with the cluster..
Hi. I need some assistance please I have just been given a golf chico carb 1.3 by my brother and the hazard lights do not flash. How can I trace the problem. thanks in advance
Hi pj I have a mk1. Golf. Have just got a new. Start but. Am having trouble stating the car have to wait for the fan to go off before it starts. But still doesn't start. Good. I know I have. My. Fathers hond. Battery in. Mine is. Flat also the distributor can also. Be the. Problem I think. Because my friend but a other pin in of a Mazda car
I have the problem of tappets making a hell of a noise and does not go away oil light flashes etc. This is after oil pump was replaced and new oil and filter added…. What now? No leaks whatsoever
I replace my oil pump in Sept and now in Nov i am having that same problem (bleeping oil light).I am bit confused by it.Its not everyday that the warning light is coming on.
you do no there are different oil pumps? and have you replaced the sensor? these sensors also can be faulty when new. what also could be the issue is thin crank bearings they then lower oil pressure on the high and low sides.
Sir my car does not have the yellow wire so im still trying to figure out how to get this resolved, but really thanks allot for your help. I'll just try to take it to a auto electrician to fix my problem.
It's very difficult to say. It could be a number of reasons.. Check fuel pump, filter, carb,.. Could be blocked fuel lines from tank side.. Its best to have it assessed by a mechanic...
Hi I got VW golf 3 1.8 I overall engen and they didn't replace oil pump and my oil bazzer is making noise I replaced oil pump but it makes the same thing what can it be
As long as the engine sounds nice and quiet,...and not a rough tappet sound ,you don't have to worry . Check on the oil pressure switches.,which is usually found on top of the oil filter ..,and one on the side of cylinder head.These sensors can also cause your oil light and buzzer to go on if they faulty.. These oil pressure switches are not expensive ..If yours are very old and been on the engine very long replace them..It may just solve the problem.You can get these at Goldwagen spares
I recently replaced the sensor on the oil filter (it was damp), at the same time I replaced the head sensor too. the fun began ! I eventually put the old sensors back, and the oil light stayed off. I have a gauge, so I know the oil pressure was good, always. At the end of the day the sensor on the head (the new one) was faulty ! There is no guarantee with a light on a dash and the oil pressure gauge saved my bacon ! BTW I also have a volt meter so I know if the alternator is charging and I can see battery condition.
Thanks I will follow I almost sold my bakkie had the pressor test and just going to change my oil filter it going to make a big,if I hai to do oil pump ja Manny dollar gone thanks
Thanks so much my good sir
Morning I got VW golf 3 they overall enjin but my oil light is coming on they didn't replace the oil pump and the cluster is making a noise I put new oil pump but it's still making noise
Hi I got VW golf 3 1.8 I overall engen and they didn't replace oil pump and my oil bazzer is making noise I replaced oil pump but it makes the same thing what can it be
Sir...i have no wire that runs to the sensor on the engine top. Where should i check for that wire
I drive an old vw Polo classic 1.4i. The oil light and buzzer came on and the car started to over heat quickly. What could the problem be and how do I fix it? I checked the oil and it is full but the oil light flashers without the buzzer all the time when driving over 2000rev. But the heat gauge climbs quickly and over heats badly
Morning mate, can you tell me my sensor makes noise I changed the one on the oil filter. I don’t have one on my head
But my MK1 beep that oil light when my fuel is quarter empty... And if my fuel is more the sound beep doesn't appear until it reaches quarter empty fuel
My car is leaking oil via the stick. The entire samp Is full of oil leaking ..wat could be the problem
Hello sir my car is always doing things like that for everyday when I reach 100 when I'm driving is indicates that light for oil so I failed to understand what's going on I have been going to some mechanic and ask what's going on here they don't see any problem
My Mk2..I replaced both sensors..but at normal operation temperature I am getting oil buzzer at more than 2000rpm when driving..but when rev it it doesn't..and then when idling also there is an oil light blinking
Hi. If you have already replaced the sensors and still getting oil buzzer, it could mean actual low oil pressure due to your oil pump maybe packing up, or it could be the oil pick up is just bit clogged up with sludge,. And to solve that u need to take off the sump and do an inspection, and clean out the sump. What grade of oil you using?.. Using too thin oil also causes oil buzzer to come on.
@@pjs-golfmk1-diy w15 shell Helix
Did u ever try 20w 50 helix? . It's recommended by vw. Good oil. I've used it for many years
@@pjs-golfmk1-diy I was using it before..I changed it in March cos of of service...the sensors Ive replaced them month end of April
@@siphoernest2278 you shud try to use 20w 50..... What u using now is probably too thin of a oil
Got a 1.3 chico with 1.4i harness... I have like 5 or 6 wires comes out of that section u cable tied on this vid for the sensors... I dont know how to track the correct wires
I have done everything on your video, light still on
Hi , I've changed the sensors but the buzzer is still going on . Oil level is good
When last did u change the oil filter?... Sometimes it gets clogged up with sludge and you have a drop in oil pressure ,... Or a bad quality oil filter also causes that.. Also the oil pick up can get clogged up due to sludge in sump.. Always good to open up the sump from time to time to inspect..
@@pjs-golfmk1-diy I service the car every 10000km wiyh gud filters and 5w40 oil there's no funny sounds the car still runs fine / strong its just the light and buzzing sound
@@markmeyer7384 why you using 5w40 oil?.... That's thin hey.... Recommended vw oil is 20w50
@@pjs-golfmk1-diy Sorry jusr checked the can again its actually 20w50
@@markmeyer7384 check on the wiring connecting to the oil sensor switches if it's not maybe bare wire touching engine.. Or could maybe issue with the cluster..
dankie boet 👍
Hi. I need some assistance please I have just been given a golf chico carb 1.3 by my brother and the hazard lights do not flash. How can I trace the problem. thanks in advance
Hi ,have you checked on the fuze yet?..check the fuze layout, and number ,on the fuze chart .,which is in the cubby hole /glove box
Hi pj I have a mk1. Golf. Have just got a new. Start but. Am having trouble stating the car have to wait for the fan to go off before it starts. But still doesn't start. Good. I know I have. My. Fathers hond. Battery in. Mine is. Flat also the distributor can also. Be the. Problem I think. Because my friend but a other pin in of a Mazda car
Jirre this english gave me cancer😢😂
I have the problem of tappets making a hell of a noise and does not go away oil light flashes etc. This is after oil pump was replaced and new oil and filter added…. What now? No leaks whatsoever
Hi sorry to hear, and for my late reply. What grade of oil are you using?
@@pjs-golfmk1-diy 20w50 exactly what they recommend at the dealership
we have a cluster problem what Now
I replace my oil pump in Sept and now in Nov i am having that same problem (bleeping oil light).I am bit confused by it.Its not everyday that the warning light is coming on.
Have u replaced the sensors. On the side of cylinder head and the one on the oil filter housing?
No,i didn't replace these sensor.
@@bonicomatroos331 best to do that... Not sure how long u have had yours on.. But they shud be replace from time to time hey
PJ-GOLF Mk1- DIY,Thanx for the advice i will do so..have been subscriber for a -+7month and i do find tips from your videos..once more thank you.
you do no there are different oil pumps? and have you replaced the sensor? these sensors also can be faulty when new. what also could be the issue is thin crank bearings they then lower oil pressure on the high and low sides.
Hi do you know how to disconnect the buzzer on the cluster?
wy not install a new sensor?
While we are still at this topic , how can i check if oil pump is working properly ?
Yes, you can do an oil pressure test, with an oil pressure gauge. Just ask your mechanic
what is the color of the wires that goes to the sensor on the head,my sensor is there but no wires
Yellow
What does red-black wire indicate?
Sir my car does not have the yellow wire so im still trying to figure out how to get this resolved, but really thanks allot for your help. I'll just try to take it to a auto electrician to fix my problem.
Yes I agree it's best to have an auto look at it. Because we could cause some harm if we going to guess and fiddle with those wires.. All the best.
@@pjs-golfmk1-diy keep up the good work... Ive learned allot off of your vids
Hi my jetta 2 dies while driving and it starts after that what can be the problem
It's very difficult to say. It could be a number of reasons.. Check fuel pump, filter, carb,.. Could be blocked fuel lines from tank side.. Its best to have it assessed by a mechanic...
Have a look at this video. It deals with fuel starvation ua-cam.com/video/mHrXswnoCk8/v-deo.html
I found a ball of stillwool blocking my Breather pipe. Why would someone put that there?
Hi I got VW golf 3 1.8 I overall engen and they didn't replace oil pump and my oil bazzer is making noise I replaced oil pump but it makes the same thing what can it be
As long as the engine sounds nice and quiet,...and not a rough tappet sound ,you don't have to worry .
Check on the oil pressure switches.,which is usually found on top of the oil filter ..,and one on the side of cylinder head.These sensors can also cause your oil light and buzzer to go on if they faulty.. These oil pressure switches are not expensive ..If yours are very old and been on the engine very long replace them..It may just solve the problem.You can get these at Goldwagen spares