I bought one of these machines a month ago and I am totally impressed with it. I have no pets or children. I am an office worker working in my office at home so my clothes have no grass stains, mud or blood stains and I find the 30min and 1hr settings completely adequate for normal clothing, towels, sheets etc. This machine is silent, uses less water, less electricity, takes less time and washes stuff cleaner than my old AEG machine.
excellent review thank you. what is the width of the porthole please? what type of drum and paddles does it have? plastic or metal and what is the difference between plastic and metal paddles and straight or wavy drum ? thanks again
Both brands Siemens and Miele are very good, but we always lean towards Siemens as i feel they offer better value for money. Although miele appliances are well built, they look a bit dated compared to Siemens so it would have to Siemens for me.
Hola I buy a siemens washing machine here in Spain and I send this washing machine in the Philippines.the problem is that the draining motor is not functioning. Somebody saying that the drainer I very low voltage can you help us sir?
Couple of suggestions. First of all make sure you are washing a good size load, not just a couple of items. If you only wash a couple of items then it won't be able to adjust the load to spin properly. Also just check to make sure the drain is not blocked or getting blocked that the water goes out of. If it is starting to get blocked then no water will be able to exit the machine and it will not spin and drain properly.
I just wanted some clarification that the clunk noise when I set the dial to a cycle is normal? It's never happened with other washing machines I have purchased. Kind regards. Carol
Hello. I have another model of the iq300 washing machine. On my machine it only shows the degree while I am adjusting it, while it is washing it does not show on the display. I am a bit insecure about how to change it. Does it wash in 90 degrees if I push the button until 90 shows or do I have to do something more to choose 90?
When you are selecting the programme, you can adjust the temperature on the display, and as long as you can select 90 degrees, then it will wash at that temperature. If you select a wash like woolens, then the machine will not let you wash at a high temperature. All you need to do is select the programme with 90 degrees on it and it will wash on that. Hope this helps.
@@lords-electrical So if I am washing cottons and I push the degree button until I reach 90, it will wash at 90. I do not have to confirm or anything? I got a little insecure as the degree shows up on the display that shows the time of the program, so when I stop pushing the degree button the degree setting will not show anymore, only the time of the program. Hope you understand, english is my third language so I am not very good at it.
I have iq500 WU14Q48XES 8kg. Somebody. Knows which is the ECO program?. In the manual read that some program spend 80 litres, another 46 litres, etc. But in the ecoinfo when use cold wash it seems more expensive that if use 60°C. I don't understand
From our experience, i would normally recommend Siemens as the reliability is very good and customer service has been excellent as well. Try and look for a model that is energy efficient though as you can save a lot of money on running costs by going for an energy efficient model.
Thank you very much for an informative video. I was wondering if you could kindly reply, 2 questions: Miele or Simens or Bosh? Also some people say that B and Smns are and is the same company.. Kind regards Andrei
I have a problem with consistency. I can programme the machine i.e Select/temp/spin speed … press “start” and it “beeps” twice and won’t start. I then go through the same process 3 or 4 times and it eventually starts. Also, sometimes for no reason it will not spin even though I have followed the instructions and followed the same process.
Please somebody help me I have 6kg Siemens front load machine having 1000 rpm.problem is that at spinning time it’s move from place and running it’s so dangerous how it fix on place
It may be that one of the springs has come loose around the drum. If you can remove the top of the machine and check that the concrete on the drum is in place and that the springs are all attached. If one has come off or broken then it will not spin correctly. Good luck!!
Hello Lords Electrical! You are doing a Good Job.👍🏼 I have Siemens IQ500 WM14T560GC 9kg model. I want to reset it.The method available on all over the internet is for old models. Kindly help me in this regard. Thanks in Advance.🙂
Lords Electrical Glad to see your reply 🙂 Reset means i want to reset the whole software to the default settings. (E.g, Method available on internet to turn the knob to 6 ‘o clock position etc etc.) But in my machine 6 ‘o clock position is not available. So kindly suggest me how to reset the software to the the default settings?
@@ayazzaidi9145 Did you ever find out how to do this? I have an iQ500 but the WM12T variety but like you, can't find an updated way to reset it. I did get it to display E:00 but I've read that just means there are no errors but it's still not reset.
It sounds like it could be a door lock issue. It could be that the door needs a nudge shut, or try turning the power off and on again. if not it may need an engineer to visit to properly diagnose the issue.
ofc the version we have in israele of this machine is a bit different... the model number is WM14T681IL its IL stands for Israel instead of GB for great britain
@@lords-electrical Thanks for your response. I got the solution from a technician. To open the lock I pressed plus and minus keys simultaneously. Hope this helps.
The key is normally a child lock option. It is used so that you can select a programme, enable the child lock and then little fingers cannot come along and change the programme on the machine.
My advice Buy a non pcb manual selection machine or a twin tub Rapid 60???? I didn’t wash my army oil sodden tank suits for 60 minutes These machines are like modern cars Totally unnecessary digital crap which is not needed to wash your clothes and also make it impossible to repair or to use. Do not buy one Find a normal recon one with a warranty and simple controls
I bought one of these machines a month ago and I am totally impressed with it. I have no pets or children. I am an office worker working in my office at home so my clothes have no grass stains, mud or blood stains and I find the 30min and 1hr settings completely adequate for normal clothing, towels, sheets etc. This machine is silent, uses less water, less electricity, takes less time and washes stuff cleaner than my old AEG machine.
Thanks for the quick guide. Hopefully we'll use it as the instructions. Thanks for calm and music free explanation.
what a great demo/review..thanks so much
How can I used the spin/drain? Please help me? I select that but stil have water what do I do?
Your voice is so calming ❤️👍🏼
Oh thank you!
excellent review thank you. what is the width of the porthole please? what type of drum and paddles does it have? plastic or metal and what is the difference between plastic and metal paddles and straight or wavy drum ? thanks again
Metal paddles are related to Classixx range and Serie 4
Anyone know please how to switch dryer on this one
To how long you want it drying please..
Thank you..
New to this one.
This machine doesn't have a dryer as part of it.
@@lords-electrical its a washer/dryer combo..
As it says on mine intense dry etc..
Hi , thank you very much for your video. I was wondering if you could recommend Simens over Miele please?
Really confused which one please?
Both brands Siemens and Miele are very good, but we always lean towards Siemens as i feel they offer better value for money. Although miele appliances are well built, they look a bit dated compared to Siemens so it would have to Siemens for me.
Miele might be a bit more expensive, but the only washer with stainless steel outer drum and enameled chassis.
(02:09) What happens if you select the spin speed to ---- (four bars) instead of 0?
0 is no spin. --- is leave the wash in de rinse water.
Hola I buy a siemens washing machine here in Spain and I send this washing machine in the Philippines.the problem is that the draining motor is not functioning. Somebody saying that the drainer I very low voltage can you help us sir?
Just got this machine, Siemens ISenoric, mine is 9kg. But unfortunately my Clothes is not draining the water out of the Clothes any idea?
Couple of suggestions. First of all make sure you are washing a good size load, not just a couple of items. If you only wash a couple of items then it won't be able to adjust the load to spin properly. Also just check to make sure the drain is not blocked or getting blocked that the water goes out of. If it is starting to get blocked then no water will be able to exit the machine and it will not spin and drain properly.
Does it have a sensor to weigh the dirty clothes and displays on the screen as you place it inside the machine before washing?
It doesn't weigh the clothes, but it will normally recommend the load to put in for each wash
I have been using mixed fabrics. When I turn the dial it makes a clunking noise, is this normal? My machine is new.
It sounds like it could be ok? I would just keep an eye on it for the next 4-5 weeks to see if the clunking gets any louder
I just wanted some clarification that the clunk noise when I set the dial to a cycle is normal? It's never happened with other washing machines I have purchased. Kind regards. Carol
Hello. I have another model of the iq300 washing machine. On my machine it only shows the degree while I am adjusting it, while it is washing it does not show on the display. I am a bit insecure about how to change it. Does it wash in 90 degrees if I push the button until 90 shows or do I have to do something more to choose 90?
When you are selecting the programme, you can adjust the temperature on the display, and as long as you can select 90 degrees, then it will wash at that temperature. If you select a wash like woolens, then the machine will not let you wash at a high temperature. All you need to do is select the programme with 90 degrees on it and it will wash on that. Hope this helps.
@@lords-electrical So if I am washing cottons and I push the degree button until I reach 90, it will wash at 90. I do not have to confirm or anything? I got a little insecure as the degree shows up on the display that shows the time of the program, so when I stop pushing the degree button the degree setting will not show anymore, only the time of the program. Hope you understand, english is my third language so I am not very good at it.
I have iq500 WU14Q48XES 8kg. Somebody. Knows which is the ECO program?. In the manual read that some program spend 80 litres, another 46 litres, etc. But in the ecoinfo when use cold wash it seems more expensive that if use 60°C. I don't understand
My emergency handle has gone up the socket, which you showed in the right side of the machine inside the small circle down. What should I do??
I think i understand the question, it should be ok, but you may not be able to open the door in an emergency. I think it may clip back on.
what function should i use to wash bag?
Which washing machine brand should I get? Whirlpool, Panasonic, Siemens or Toshiba? I'm thinking of getting one with a built-in dryer.
From our experience, i would normally recommend Siemens as the reliability is very good and customer service has been excellent as well. Try and look for a model that is energy efficient though as you can save a lot of money on running costs by going for an energy efficient model.
@@lords-electrical And Also Bosch
Thank you very much for an informative video.
I was wondering if you could kindly reply, 2 questions: Miele or Simens or Bosh?
Also some people say that B and Smns are and is the same company..
Kind regards Andrei
I have a problem with consistency. I can programme the machine i.e Select/temp/spin speed … press “start” and it “beeps” twice and won’t start. I then go through the same process 3 or 4 times and it eventually starts. Also, sometimes for no reason it will not spin even though I have followed the instructions and followed the same process.
Did you ever get a reply to this ? I have the same issue!
Hi... What will be the water pressure for this machine. Interms of water outcome liters per minute.
Please somebody help me I have 6kg Siemens front load machine having 1000 rpm.problem is that at spinning time it’s move from place and running it’s so dangerous how it fix on place
It may be that one of the springs has come loose around the drum. If you can remove the top of the machine and check that the concrete on the drum is in place and that the springs are all attached. If one has come off or broken then it will not spin correctly. Good luck!!
I have the 9k one. I am very dissappointed in it! Now it has locked itself showing e56 will not start.
Hello Lords Electrical!
You are doing a Good Job.👍🏼
I have Siemens IQ500 WM14T560GC 9kg model.
I want to reset it.The method available on all over the internet is for old models.
Kindly help me in this regard.
Thanks in Advance.🙂
Hi, when you say you want to reset it what are you trying to do. Is it stuck on a programme or is the child lock enabled?
Lords Electrical Glad to see your reply 🙂
Reset means i want to reset the whole software to the default settings.
(E.g, Method available on internet to turn the knob to 6 ‘o clock position etc etc.)
But in my machine 6 ‘o clock position is not available.
So kindly suggest me how to reset the software to the the default settings?
@@ayazzaidi9145 Did you ever find out how to do this? I have an iQ500 but the WM12T variety but like you, can't find an updated way to reset it. I did get it to display E:00 but I've read that just means there are no errors but it's still not reset.
Good day plzz help what can I do my machine is showing EO1
It sounds like it could be a door lock issue. It could be that the door needs a nudge shut, or try turning the power off and on again. if not it may need an engineer to visit to properly diagnose the issue.
This became auto locked how can open door can you advise its given key locked while its on.
You will normally need to wait until the wash has finished before opening the door.
ofc the version we have in israele of this machine is a bit different... the model number is WM14T681IL its IL stands for Israel instead of GB for great britain
How to remove key symbol from it's panel?
The key symbol is normally a child lock, so have a look in the instructions as it should show you how to disable it
@@lords-electrical Thanks for your response. I got the solution from a technician. To open the lock I pressed plus and minus keys simultaneously. Hope this helps.
What is the meaning of key option??
The key is normally a child lock option. It is used so that you can select a programme, enable the child lock and then little fingers cannot come along and change the programme on the machine.
How to ge rid of the key lock?
If you press the "Spin Speed" and "Ready In" button for 3 seconds it should release the key lock
Can you turn off the beeping when the cycle has ended?? So loud and annoying.
Extra rinse?
Stick it in a bucket of water
How can we change rapid 30min to 15min?
I think on this model if you press the speed perfect button it should shorten it.
Shame it’s part of a recall now...
Was it the BSH recall?
How fo i unlock the child key
That looks like a Serie 6
Related to Bosch
This is crazy, why cant you just start the thing now.
Do NOT buy any modern Siemens washing machine. bearings CAN'T be replaced on purpose!
Unfortunately a lot of manufacturers have sealed drums now where the bearings cannot be changed which can be frustrating.
@@lords-electrical yes it got me angry
My advice
Buy a non pcb manual selection machine or a twin tub
Rapid 60????
I didn’t wash my army oil sodden tank suits for 60 minutes
These machines are like modern cars
Totally unnecessary digital crap which is not needed to wash your clothes and also make it impossible to repair or to use.
Do not buy one
Find a normal recon one with a warranty and simple controls