Thank you for your Pavo 20 videos, I have just started as a noob. I just got the pavo 20 w/ 03 unit, integra googles, TBS tango 2 on crossfire all paired up by ''DroneCamps rc guy"" and have flown fpv yet. Your vids are so useful in helping me grasp the fpv concept with the same quad. You should link your those batteries.LOl
And this is a link for 3s battery they are both 550mah and are the best over all for the drone TATTU R-Line 3S Lipo Battery... www.amazon.com/dp/B097BVB2DT?ref=ppx_pop_mob_ap_share
That’s so cool! I am actually looking into pretty much the same set up as yours (except that I own a Boxer on ELRS). I’d like to know what else did you need to get started? (This is my first ever drone). I know I need to order the air unit o3, the drone, and the goggles. Is there any soldering or tools that I need to get it going? Maybe like screwdrivers? Thanks a lot I appreciate it
Nice video , the Pavo25 but the V2 is a super fast and powerful for me the fastest in its size, but now the new Cinebot 25 S has also come out which appears to be better built and very fast.
@@954Film For the Pavo brand the 25v2 it's better than the 35 , faster and powerful enough to outside. Unless you want a full size GoPro and slower fly style
Thanks for your video, I already built my own but I have had overheating problems and when I raise it in angle mode it moves only to the sides and I already calibrated its position in betaflight and also adjusted the sticks on my radiomaster pocket. Maybe you can help me with That and the overheating thing. thank you
Are you on stock rates? Also, how were you able to fit the chnl battery, did you have to cut the battery mount/side holders? Lastly, it looks like your vlog was shot on 360p.
I just installed the o3 air on my pavo 20 but I'm going to use my taranis qx7 with the happymodel elrs module. I think you meant uart 1 in betaflight not user 1. I hope to have everything set up next weekend
I got a new Pavo recently and the light control was under uart 1 I thought it was kinda weird because my first Pavo 100 percent used user 1 for the lights
@@954Film I can't wait to get mine in the air. Was going to use my taranis qx7 but decided to pull the trigger on the dji controller 2. Not crazy about the whole elrs binding crap. I'll be sure to re-watch the new pavo 20 setup video once my new controller arrives. Thanks dude
I have goggles 2 and the DJI controller 2, what do I need to buy to get the Pavo 20 or a pavo25 v2 to work? I am still new and I am thinking this is how I can get into manual flying! Oh and great video!
You just need a Pavo 20 or a Pavo 25 and a o3 air unit you can make your remote and goggles work with the 2 that is exactly how I got into fpv I got a dji combo bought a Pavo now I am flying both drones in manual mode
@@VinchysVisuals yes i have the I flight Cristal signal boosters coming in on mar 1st when i get them in i am gonna make a vid installing and showing you how to unlock the goggles
Спасибо . Очень красиво . Природа у вас замечательная . Я у себя летал , прямо в грязь падал .
Thank you for your Pavo 20 videos, I have just started as a noob. I just got the pavo 20 w/ 03 unit, integra googles, TBS tango 2 on crossfire all paired up by ''DroneCamps rc guy"" and have flown fpv yet. Your vids are so useful in helping me grasp the fpv concept with the same quad. You should link your those batteries.LOl
This is a link to the 2s battery TATTU R-Line 550mAh 7.4V 95C 2S1P... www.amazon.com/dp/B097BTRH2X?ref=ppx_pop_mob_ap_share
And this is a link for 3s battery they are both 550mah and are the best over all for the drone TATTU R-Line 3S Lipo Battery... www.amazon.com/dp/B097BVB2DT?ref=ppx_pop_mob_ap_share
Thanks so much for watching I am glad I could be of help!
That’s so cool! I am actually looking into pretty much the same set up as yours (except that I own a Boxer on ELRS). I’d like to know what else did you need to get started? (This is my first ever drone). I know I need to order the air unit o3, the drone, and the goggles. Is there any soldering or tools that I need to get it going? Maybe like screwdrivers? Thanks a lot I appreciate it
Oh and I forgot to me too I know I need the batteries too lol
I bought one pavo20, I couldn't decide between pavo20 and pico. Pavo20 seems more stable, I can't wait for it to arrive. Thanks for video
Thanks for watching! The Pavo is a really fun drone for what it is you are gonna love it!
Got my sub bro nice work good content
At least U edit lol
Cheers from Australia bro
Thanks so much man!!!
@@954Film too easy bud keep ripping ay!
How did you mount your antenna? I’m looking for a 3d mount but I see you got yours to stay without one.
It goes in the little hole on the o3 bracket perfectly
When you get a chance you should look at getting the Pavo25. Flys just as good, but with way more power. Nice video.
Thanks I have been back and forth between the Pavo 25 and the Pavo 35 I don’t know witch one I want
Nice video , the Pavo25 but the V2 is a super fast and powerful for me the fastest in its size, but now the new Cinebot 25 S has also come out which appears to be better built and very fast.
@@cristianjosadec do you think I should be looking at a 25 size or a 35 size?
@@954Film For the Pavo brand the 25v2 it's better than the 35 , faster and powerful enough to outside. Unless you want a full size GoPro and slower fly style
Why googles v2? Are they really better than G2\integra?
I use them because I got them with my dji fpv combo but they do run a little bit higher fps than the newer goggles
check your antenna connection for the o3 unit for transmission.
Good video bro
Thanks man!
Thanks for your video, I already built my own but I have had overheating problems and when I raise it in angle mode it moves only to the sides and I already calibrated its position in betaflight and also adjusted the sticks on my radiomaster pocket. Maybe you can help me with That and the overheating thing. thank you
The over heating problem could have to do with your voltage settings in Betaflight
Can you share a screenshot of where that is in the betaflight? or tell me in what page on betaflight they are? and thanks for your help bro@@954Film
Are you on stock rates? Also, how were you able to fit the chnl battery, did you have to cut the battery mount/side holders? Lastly, it looks like your vlog was shot on 360p.
Yes I am on the stock rates and I got the battery vertically and I added a bigger battery strap no need to cut the battery mount.
@@954Film got it, appreciate your response! Happy flying!
I just installed the o3 air on my pavo 20 but I'm going to use my taranis qx7 with the happymodel elrs module. I think you meant uart 1 in betaflight not user 1. I hope to have everything set up next weekend
No he is correct, user 1 is the name in the modes tab assigned for the lights
I got a new Pavo recently and the light control was under uart 1 I thought it was kinda weird because my first Pavo 100 percent used user 1 for the lights
@@954Film I can't wait to get mine in the air. Was going to use my taranis qx7 but decided to pull the trigger on the dji controller 2. Not crazy about the whole elrs binding crap. I'll be sure to re-watch the new pavo 20 setup video once my new controller arrives. Thanks dude
I have goggles 2 and the DJI controller 2, what do I need to buy to get the Pavo 20 or a pavo25 v2 to work? I am still new and I am thinking this is how I can get into manual flying! Oh and great video!
You just need a Pavo 20 or a Pavo 25 and a o3 air unit you can make your remote and goggles work with the 2 that is exactly how I got into fpv I got a dji combo bought a Pavo now I am flying both drones in manual mode
@@954Film thank you!!! Now I am stoked!!
@@knightrulz2 hell yea the Pavo is a really good drone both the 20 and the 25 they are both very different drones tho
Regarding to the transmission have you tried changing the power on the fpv goggles to 700mw or 1w?
Right after this vid I did the power hack on the goggles and it was a night and day difference and now I have full Chanel control
@@954Film can you share how you did this, having transmission issues with my goggles2 as well. Thanks!
@@VinchysVisuals yes i have the I flight Cristal signal boosters coming in on mar 1st when i get them in i am gonna make a vid installing and showing you how to unlock the goggles
You need the goggles 2 if you want better signal
Whats your throttle mid and expo?
I left all the settings as they came from the factory
The stock tune on the drone is pretty good
My User 1 not appear in Modes tab this time, it's weird
It could be under uart1 some peoples drones have it under that for whatever reason I just got a new Pavo on and it was uart1 not user 1
Also here in south FL link up
Same here...in Ft Lauderdale off of 95 and SR 84!
Let’s link up and make a vid soon
@954Film I'm in! Yall reach out and we can make something happen!
Is the dji fpv better than the pavo20?
They are completely different types of drones but I enjoy the Pavo much more than the DJi fpv
Footage looks good even with the stabilization off.
Yea it is pretty smooth to be honest I had it off for the first 2 flights and I didn’t even know it was
or look into 5.8 GHz Directional Antenna Protective Shell for dji FPV Goggles V2
I just got my I flight Cristal antenna in
five hundred fifty not fifty five hundred lol.
I think would be nice to leave one of the flights with OSD instead of stabled video. Looks like it flies well.
As far as I know I can’t get the osd flight vid unless I am using the new ski goggles
DJI^^^
@@954Film you can with wtfos on the goggles
Think u mean 550 & 650 champ, 5600 or 6500 brick on ur Pavo u wouldn’t be able to take off.
Yea have been playing with fat rc cars a little to much had my battery’s all mixed up
Fast^^^
Not 6500 or 5500. 650 or 550.
You are right I have been playing with to many rc speed cars with bigger battery’s 😂😂😂