Harbor Freight Manual Tire Changer First Test
Вставка
- Опубліковано 5 гру 2023
- Like us on Facebook at Williamson Ridge Outdoors
E-Mail Us:
williamsonridgeoutdoors@yahoo.com
Channel Sponsors:
Eastonmade Commercial Wood Splitters
www.eastonmadewoodsplitters.com/
Super Lime Plus
www.superlimeplus.com/
Bullet Proof Hitches
www.bulletproofhitches.com/
Equipment List:
EastonMade 9-16 Commercial Wood Splitter
Eastonmade STK 24 Firewood Conveyor
www.eastonmadewoodsplitters.com/
Kubota M6060
Echo CS-590 Timberwolf
Echo CS-346
Dewalt 20Max Grease Gun
MTL Grapple
King Kutter 6' Rotary Cutter
Everything Attachments Pallet Forks
Everything Attachment 6' Box Blade
Titan Attachments 3000lbs Hay Spear
Kubota Z421 Zero Turn Mower - Розваги
Just bought one myself. thank you, Sir, for posting.
Good job! I do this daily for a living. If you have weights always mark where your valve is and bead seal is a must i say on old rims
Thanks for watching!
I have the same setup and the same tire bead lubricant. You mentioned that water can cause rust on the wheel and when I got that lubricant I read the instructions on it and it's supposed to be diluted 4:1 with water. So much for preventing rust.
Keep your eye out at auctions or sales for one of those bead setter air tanks. I got ahold of one for $35 so I just fill it before I change the tire and use that instead of farting around with trying to set the bead. All my tires seem to need work on Sunday morning when I need to use the equipment they are on. Good video.
Yeah I’ve been thinking about getting one, lol yeah tires always seem to go flat right when you need them
Good old starting fluid. Dose the trick for me
❤you sir are a boss! I'm gonna get a bead setter
I got some black sealer that goes around it fills pitts and it seals it
The new black tire stand is superior to the old red one. I am pleased with mine.
Yes, I seen where people had trouble with the red ones but so far mine has been trouble free
I do all of my tires on this machine I was having a ton of problems trying to set the beads on the tire before you can air the tire up. I don’t mess around with a ratchet strap or anything else. I use the fire trick and it works painlessly every single time. I set the tire on the ground. Then I spray a little brake parts cleaner in between the tire and rim and over the tire onto the ground as a wick. I light the wick and it causes a little explosion inside the tire and forces both beads into place. I never struggle with this step anymore. Make sure you don’t use a lot of brake parts cleaner, ether, or any flammable spray etc. or this can be extremely dangerous. Less is more.
You could have brushed the sealant around the rim where you cleaned up. The sealant seals the bare metal. Good luck with the dump trailer tires. Thanks for the videos.
Now that you mention that I always see the tire shops put sealant/lube on the tires and the rim, definitely will be doing that next time, thanks for the tip!
Clamp on other side helps
Just an observation: when you were installing the new tire you have the installer upside down. At the very end of the pole, the wide part has a notch that is designed to ride the rim and the narrow part faces upward and guides the bead downward over then rim. You would have had a much easier time using it correctly.
Thanks for the info I will take that into consideration on the next one
What is the cost.
I think I paid $45 on sale, reg price I think is $69
👍⭐⭐⭐⭐⭐🏆
Mine is still in the box.
There are lots of videos on mods being done. To lessen the human force needed. Just saying. Thanks for sharing.
IT CALLED A WHEEL NOT RIM. the rim is the outer part of a wheel. the outer bead seat is edge that the tire bead seats on the WHEEL
Thanks for enlightening me on your wealth of knowledge about wheels
Highseed A Rim Job is A Rim Job.. What’s it matter!!!
did you go to “discount tire university” too?
Yes I had to tell my wife to work my rim not my wheel
Rim is perfectly acceptable.
If you've never heard it - i. e. "Got a new set of rims." - then you've led a sheltered life.