Amiga 4000D Rebuild Episode 8: More Upgrades

Поділитися
Вставка
  • Опубліковано 2 жов 2024

КОМЕНТАРІ • 5

  • @danielktdoranie
    @danielktdoranie 8 місяців тому +2

    That is awesome. You're a mad man. Can't wait to see it built.

  • @cullmaster7361
    @cullmaster7361 8 місяців тому +1

    Nice one Clark 👍🏻 I have 2 of these. One in a Desktop case (Like yours) and one in a Tower conversion. The one in the desktop has the 3 Oscillator mod, where you can separate out SCSI,68060 and PPC. The one in the Desktop has 50mhz for SCSI, 75mhz for my REV6 060 and 66mhz for the 240mhz PPC. The other Cyberstorm has the 2 Oscillators but has an upgraded 604 PPC chip running at 420MHZ. The G-REX for A4000 are rare! Had the A1200 version and found it lacking. Don’t forget the A1200 had the Phase 5 Blizzard 040 and 060 with PPC cards and could hold up to 256MB FastRAM. Be careful with the Mediator busboard,as if you have this and a Indivision AGA over the LISA chip these can short each other out. Wish Elbox would provide a stand-off 🤔🙄 Which firmware version are you running on your Cyberstorm?

    • @ClarkHale
      @ClarkHale  8 місяців тому +1

      That's a great point about a stand off between the Indivision and the Mediator. I can probably make one. So far, haven't had a problem, but they are tight and it wouldn't take much sagging to make them connect.
      I'm not sure what firmware version....I'll have to check when I get back to it.

  • @Darrenhd2
    @Darrenhd2 8 місяців тому +1

    Very cool! I have a Cyberstorm PPC with the GREX-4000. It has drivers for Voodoo 3, RTL 8029 Network, and FM801 sound. I have all of those cards and it works great! About twice as fast over the custom PCI bus vs. Zorro III.