There’s not many of us that’s for sure! Great seeing another doing the build. Have a channel or page you keep updated? Would love to see progress of your build!
Mine is a Starion M120. Just bought PMCs trans adapter for a BMW 6 Speed. All i need to majorly do now is a little nip tuck on my Transwell, drive line and trans mounts. Relocate my sway slightly forward away from oil pan, make new engine mounts for swapped 240sx crossmember. 240sx Coil over/s13 knuckles mated to new control arms, using 4 pot fronts "300zx" with zx hubs and rotor. Engine runs, maybe needs a replacement injector.. or non ebay ford 4.6.. lol. Slight miss on a single cylinder, good compression. Keep in touch guys. Should we all make a Facebook group ?
Hopefully have something together this next month. Had another project I had to complete this last month which took all my time. Probably have a short section on that as well 👍🏻
I am excited to see how this goes. I am putting a M120 into a chassis with plenty of space to work with and am curious how your design will sound. Looking at Zonda exhaust, they do a 6-2-1 collector setup, but the few equal length header setups I've seen have been 6-1. Keep it up.
That makes 2 of us. Excited to hear the 6-1! I’ve seen a few like you mentioned 6-2-1. Luckily I have the space for the the large collector. What chassis are you putting your into? Not to many of us doing this swap, but seems to be growing in popularity.
Hey Michael, thanks! I do understand what you mean, total length is roughly 25 .25 inches give or take 5/16 of an inch or total length of 64.14 CM give or take .79cm.
Material I would say around 1 to 1.5 rolls of 1kg filament for both sides. Price varies depending color and type. I used PLA, but looking back I wish I would have used something stronger like ABS. I had issues i the beginning tearing them apart so often that some broke.
@@dream_killer_racing true. But the m120 is very reliable and maintenance was actually easy compared to the old w126 mechanical fuel injection and rebuilding fuel distributors. To have a manual behind one would be worth getting another one
@@alimehrozi2828 I’ve seen them do tiptronic autos but need something that will be able to handle 600+ hp. This v12 will be procharged at some point in its life 😈
I've been working on my m120 swap in my fc rx7 for a year now, its awesome seeing another project come to life with the motor
There’s not many of us that’s for sure! Great seeing another doing the build. Have a channel or page you keep updated? Would love to see progress of your build!
@@dream_killer_racing i keep getting a notification for this comment it doesnt show i reasponded so I may or may not have reasponded twice
Mine is a Starion M120.
Just bought PMCs trans adapter for a BMW 6 Speed.
All i need to majorly do now is a little nip tuck on my Transwell, drive line and trans mounts.
Relocate my sway slightly forward away from oil pan, make new engine mounts for swapped 240sx crossmember.
240sx Coil over/s13 knuckles mated to new control arms, using 4 pot fronts "300zx" with zx hubs and rotor.
Engine runs, maybe needs a replacement injector.. or non ebay ford 4.6.. lol.
Slight miss on a single cylinder, good compression.
Keep in touch guys.
Should we all make a Facebook group ?
Hell yeah man. Will be swapping an m120 into a 560 sec and need it to scream!
Looking forward to part 2! I am looking to do something similar with my Jaguar XJS V12.
Hopefully have something together this next month. Had another project I had to complete this last month which took all my time. Probably have a short section on that as well 👍🏻
I am excited to see how this goes. I am putting a M120 into a chassis with plenty of space to work with and am curious how your design will sound. Looking at Zonda exhaust, they do a 6-2-1 collector setup, but the few equal length header setups I've seen have been 6-1. Keep it up.
That makes 2 of us. Excited to hear the 6-1! I’ve seen a few like you mentioned 6-2-1. Luckily I have the space for the the large collector. What chassis are you putting your into? Not to many of us doing this swap, but seems to be growing in popularity.
@@dream_killer_racing It's going into a 1975 Ramcharger.
@@browniedavis Awesome! And ya plenty of room for ya. Keep us updated!
@@browniedavis hahahhhaha was not expecting ramcharger. Thats amazing
Hey mate, great work!
How long would the tubes be if they would be straight? I hope you understand how i mean it..
greetings from Germany
Hey Michael, thanks! I do understand what you mean, total length is roughly 25 .25 inches give or take 5/16 of an inch or total length of 64.14 CM give or take .79cm.
@@dream_killer_racing Thank you very much!
How much did it take to print the mockup blocks?
Material I would say around 1 to 1.5 rolls of 1kg filament for both sides. Price varies depending color and type. I used PLA, but looking back I wish I would have used something stronger like ABS. I had issues i the beginning tearing them apart so often that some broke.
@@dream_killer_racingok but how long did it take ?
@@bandi_TEE I took my time to print these, but usually would get 18 pieces a day.
@@dream_killer_racing thanks
I regret selling my 93 600sel. The m120 v12 was a beast. I'm considering selling my gen 1 tundra stepside to buy it back.
They are pretty sweet machines, but come with their own set of problems
@@dream_killer_racing true. But the m120 is very reliable and maintenance was actually easy compared to the old w126 mechanical fuel injection and rebuilding fuel distributors. To have a manual behind one would be worth getting another one
Manual transmission with a lightweight flywheel you've got a poor man's front engine Pagani
That’s the plan!! Gonna be rowdy! 😁👍🏻
@@dream_killer_racing why not just convert an SL600 to a manual? Wouldn't that be easier? Since it's already in there
@@alimehrozi2828 I’ve seen them do tiptronic autos but need something that will be able to handle 600+ hp. This v12 will be procharged at some point in its life 😈
@@dream_killer_racing Holy snikies a manual procharged m120? Dreams do come true!
Price for headers?
I don’t plan on selling or building thanks though
@@dream_killer_racing Guess i'll have to 3d print the snap tubes and did like you did.
@@caseycappoen251 use something stronger than PLA
@@dream_killer_racing Nylon6 + CF will work.