Very useful video! I have a GTX1650 in my computer for video editing and I wanted to significantly increase the speed of the H.264 render by buying an RTX3050. But now I see that the performance gain will be small. It makes no sense to overpay a lot of money. Thanks!
@Đức Huy Nguyễn I have a Core i7-10700F + 32 GB RAM. I think this configuration is enough. When rendering, the GPU load is always about to 100%, and the main processor is almost resting (20-30%). That's why I want to understand whether the purchase of 3050 or 3060 will provide a noticeable increase. So far I see that the increase is about 20-30%, depending on the number of effects. In practice, this saves 2-3 minutes on each renderind of a 7-minute-long video. Not so much. The 4060 series provides some more increase, but again this increase is not consistent with overpayment. The main performance of these video cards is manifested in games. I'll probably wait until the end of the year and buy a cheaper RTX3060 12G by that time.
if you do premiere pro / video editing software a lot, go for better CPU more GHZ more Core is wayyy better, GPU not help so much except for some effect
I have i9 13900kf processor and rtx 3060 12 gb gpu and 64 gb ram.. but while rendering my desktop only use Cpu and integrated graphics card. I want to know why and how i can change it?
the non "f" intel cpu 's (cpu without igp) encodes and decodes premier pro media engine processes (h625, h624). This is one of the most usefull and important thing near by the discrete vga because igp and discrete vga can work together ! your i9-13900kf cpu without integrated graphics card. : (
The 1030 does not have a hardware encoder built in so it would be painfully slow. You'd be better off with an intel non F chip that has integrated graphics so you can use quicksync. For a gpu 1050ti or 1650 is probably the cheapest you could go.
@@boxboy_xcan you please tell which will be good for 2d animation in a laptop. I want to make 5 to 10 minutes videos using blender or toonboom in a laptop.
Very useful video! I have a GTX1650 in my computer for video editing and I wanted to significantly increase the speed of the H.264 render by buying an RTX3050. But now I see that the performance gain will be small. It makes no sense to overpay a lot of money. Thanks!
@Đức Huy Nguyễn I have a Core i7-10700F + 32 GB RAM. I think this configuration is enough. When rendering, the GPU load is always about to 100%, and the main processor is almost resting (20-30%). That's why I want to understand whether the purchase of 3050 or 3060 will provide a noticeable increase. So far I see that the increase is about 20-30%, depending on the number of effects. In practice, this saves 2-3 minutes on each renderind of a 7-minute-long video. Not so much. The 4060 series provides some more increase, but again this increase is not consistent with overpayment. The main performance of these video cards is manifested in games. I'll probably wait until the end of the year and buy a cheaper RTX3060 12G by that time.
@@chhatrapatikumarmust be joking 🤦♂️ ru tryna flex
I am buying GTX 1650 in 2024 and pairing it with I5 12400F ..i want it for video editing like premire pro and after effect .. should i buy itt ??
@@vaidikrao1202 if your in a budget it’s good, but if not get the rtx 3060
if you do premiere pro / video editing software a lot, go for better CPU more GHZ more Core is wayyy better, GPU not help so much except for some effect
those 2 minutes are the extended coffee break
This is the very reason that makes me stay on the GTX 1650
I like the music cool, also the 12 GEN GPU helps a lot with rendering. the CPU is the real deal
Video length???
seems to be 11m 16s (and 9 frames)
Does this improve video quality as well? I'm using GTX 1650 on my old setup and the quality drops much afterwards.
Lovee this thank you
i tought it was 1660 super then I noticed it .
I have i9 13900kf processor and rtx 3060 12 gb gpu and 64 gb ram.. but while rendering my desktop only use Cpu and integrated graphics card. I want to know why and how i can change it?
Select nvdia nvenc encoder from settings as rendering card
the non "f" intel cpu 's (cpu without igp) encodes and decodes premier pro media engine processes (h625, h624). This is one of the most usefull and important thing near by the discrete vga because igp and discrete vga can work together ! your i9-13900kf cpu without integrated graphics card. : (
Witch proseccer you are using
I need a similar comparison b/w a basic card like 1030 and something decent like 3050.
The 1030 does not have a hardware encoder built in so it would be painfully slow. You'd be better off with an intel non F chip that has integrated graphics so you can use quicksync. For a gpu 1050ti or 1650 is probably the cheapest you could go.
@@shubhambobhate4941 which one will be better value for money? 1650 (Rs 12,100), vs 3050 (16500)
I'm kinda a little bit scared of that temp of gtx 1650
67-68c is fine
Bro how your GPU memory is 24 gb tell me
I have a 3070 ti and shows 24GB for me, I don't know why! 🤔
Because GPU useing half of the RAM size. If you have 16 GB RAM and 4 GB nvidia then GPU memory will show 12 GB
playback 4k is lagging?
the price of 1650 is far better that stupid 3050 card. so u pay more alot of money for only 2 minutes ?
How can increase GPU speed like that... How tutorial that? I use GTX1650 - i5 gen10 - PremierPro 2020 😁🙏🏻🙏🏻🙏🏻
what about aspire 7 i5-12450H + GTX 1650, kaya po ba sa 3D rendering even in the future? for engineering student lang po.
dont use laptop for professional jobs like engineering, build a pc
gigabyte 1650 or msi 1650??
I bought the msi gtx 1650 ventus ocv3
Good bro
I don't get it. So for video editing which one is better?
RTX watch 10:10 to understand
@@boxboy_xcan you please tell which will be good for 2d animation in a laptop. I want to make 5 to 10 minutes videos using blender or toonboom in a laptop.
rtx ofc
Ur not so bright
@@Mr.Eminem what do you know ? You're not even an editor Lol
Класс! Давай 1660 super vs 3070ti
3050 u use is 6gb or 8gb ?
8gb
1060 🤮🤮