My Favorite Table Saw Jig For Tapers and Angles - Woodworking Essentials
Вставка
- Опубліковано 3 вер 2023
- I wasn't happy with the tapering jig I had for my woodworking and furniture building projects, so I decided to build one that I could adapt to whatever project I needed it for.
In this video I use leftover plywood, threaded inserts and toggle clamps to make what I feel is a super versatile jig for woodworking. 💪🏻
👇🏻Very Important👇🏻😉
If you enjoy my videos and want to help get me closer to not being a janitor anymore, be sure to like & subscribe and don't forget the 💥"Super Thanks"💥 button if the video was helpful! 🙌🏻
If you're interested in building one of these for yourself, here are some Amazon links to get some of the parts. As an Amazon Affiliate I may earn a small commission from any purchases made as a result of you using these links...I appreciate all your clicks and purchases!!
1/4-20 threaded inserts: amzn.to/3P09FFn
1/4-20 threaded insert bit: amzn.to/3Z5x90A
8-32 threaded insert: amzn.to/3R7hADh
8-32 threaded insert bit: amzn.to/3qQ1405
Toggle Clamps (horizontal style): amzn.to/3Z0SUhK
Toggle Clamps (vertical style): amzn.to/44C9Igg
Amana Countersink Bits (multiple sizes at this link): amzn.to/3L7G5fU
Freud 3/4" router bit (1/4" shank): amzn.to/44BzyB8
1/2" Forstner Drill Bit: amzn.to/3qZkNKE
My Camera Gear:
Canon M50 MKII with 15-45 lens: amzn.to/3sFTtBP
Neewer Motorized Slider: amzn.to/44In4HL
Neewer Desktop Tripod: amzn.to/3YZEBdr
Zhiyun Weebil S Gimbal: amzn.to/3L8Twwb
DJI Mini SE Drone: amzn.to/45Vesid
Thank you all so much for watching! Be sure to check me out everywhere else...Instagram, Etsy, my website, Amazon and Facebook. Links below.
My Website: www/stuffsethmakes.com
Stuff Seth Makes - Instagram: / stuffsethmakes
Etsy: www.etsy.com/shop/stuffsethmakes
Amazon Storefront: www.amazon.com/shop/stuffsethm...
Facebook: / stuffsethmakes
🤜🏻See you on the next one!! 🤛🏻 - Навчання та стиль
Thank You For Taking the Time to Make This Concise Informative Video
I might add that the use of a runner, rather than using the table saw fence allows nearly unlimited sizes of parts to be tapered. However, a couple of stop blocks fit the end and sides would insure repeatable accuracy.
Typically I use a scissors type tapering jig or make one out of scrap for one off use with stop blocks. Stop blocks can be temporarily placed with CA glue placed inside a sandwich of blue painters tape, so the same dumb sheet of plywood can be used multiple times. My hold downs are a piece of wood on top of the part screwed onto the plywood base.
But your jig is much more higher tech.
Thank you, this is a great version of a tapering sled. and a very well put together video to follow. - Like it
glad you enjoyed it! i appreciate the comment. I think there are some benefits to other jigs but i've been using this one on a bedside table commission (since finishing this video) and I'm still liking how it functions. Thanks for watching!🙌🏻
thanks to "Make something* channel for sending me here!
Make Something can thank Stuff Seth Makes for designing a table to steal🤣🤣. Thanks for being here, looking to have a good year here in the 'Tube 🙌🏻
Ha ha, well I think he is thanking you because he also gives you credit in his most recent video for that design, great work!
Cheers from a new subscriber :)
Ha ha, well I think he is thanking you because he also gives you credit in his most recent video for that design, great work!
Cheers from a new subscriber :)
Ha ha, well I think he is thanking you because he also gives you credit in his most recent video for that design, great work!
Cheers from a new subscriber :)
Ha ha, well I think he is thanking you because he also gives you credit in his most recent video for that design, great work!
Cheers from a new subscriber :)
Nice vid
thanks homie!👊🏻
@@stuffsethmakes always has banger vids👏
great video quality. love the shots and angles...and slider shots! 💛
glad somebody finally noticed! thanks so much!🙌🏻
Brilliant. Making one this week. I figure I’ll add common angles to be ahead of the game. Many thanks!!! 🙌
awesome! yeah, adding some common angles would be a great idea. I've found the jig to be especially helpful when i'm doing several pieces with the same cut. Currently making a pair of walnut bedside tables and it was super helpful! 👍🏻. Thanks for watching!
great project, great video!
Good job man,i like this idea
thanks!🙌🏻 I'd imagine that other people can think of different ways to max out its potential too👍🏻
Add a stop for repeatability
Well done Seth! Very nice tapering jig that I will have to make myself. I was wondering if it would be possible to use magnetic catches to hold those toggles in place. That way they would be very easy to move around. Just a thought? BTW, you have a new subscriber! 👍👍
great thought on the magnets, but (if i'm picturing that idea correctly) I don't know if the magnets would be strong enough to hold the toggle clamp in place as you lock down the lever. Having them screws down really allows them to stay put. But again, maybe what im picturing in my head isn't what you mean🤦🏻♂️😆. There's more than one way to skin a cat! haha! Thanks for watching and thanks for the sub!🙌🏻