I’ve been loyal to the brand since it was first introduced to me back in the early 1990s. It has been the only thing I’ve used on my pistols and rifles. (The first case I bought was from an HK parts dealer that told me that German shooters swear by the stuff.) Needless to say, I just ordered another case 12/08/2021 today…
I have been watching Hickok45 for years. Always seen him rave about Ballistol. When it was time to get my Own Firearms I ordered Ballistol too. I’ve currently got a SIG P320 X Five and a Desert Eagle, all I use is Ballistol. Spray them up crazy, let them sit for a bit, wipe or brush everything off very dry, then apply key dabs of Ballistol back on to directed points of the Firearms very lightly with a Cotton Tip, reassemble and that’s it. Zero Malfunctions at the Range from both Firearms with this method. 100% Endorsement.
I use ballistol for surface cleaning and protection, clp for moving parts lubrication. Ballistol works way better for rust protection then breakfree clp in my experience. I think ballistol works really well for protecting blued steel or blued guns generally. brought a new shine out of my mossberg. I also agree ballistol stinks, but you kinda get used to it/grow to like it 🤣
Use whatever gets your gun clean and keeps your gun operating. For me, Ballistol does a great job and it's what I always use. I dig the smell too. On a side note, I love the way those Berettas look - they seem like solid firearms, need to get one!
I love my M9 Brigadier, just kind of a pain to get holsters since it's slightly differently shaped and thicker, but I think it's worth it for the replaceable sights.
Ballistol does magic on leather and plastic parts, doesn't damage them, my second best choice is Froglube, smells great and doesn't damage plastic and wood.
I used to use Ballistol. I recently bought a couple of plastic bottles with needle applicators. I put Mobil 1 in one and Ballistol in the other. If the applicator sits for any length of time, the Ballistol needle would be plugged. The Mobil 1 needle never dried and plugged. Mobil 1 will not leave a dried sticky mess under the grips.
There are so many quality cleaners and lubes on the market. I don't know if it makes that much difference. I like Ballistol. It's works well, and is safe for those guns that have wood stocks and grips.
I tended to agree that they all are basically the same until I tried something different. I didn't know what I was missing just sticking with Ballistol.
I was introduced to Ballistol when I started into cap and ball pistols and Black Powder. It has taken me awhile to sort out its best uses, but ultimately I use Ballistol to clean my guns, and use it liberally as a rust preventive and corrosion inhibitor on the Black powder guns. I use all Wilsons lubes to assemble my 1911's and semi automatics exclusively, and use the Wilsons grease on the center cylinder steel rod in my Black Powder pistols. Both have their place, and thought this was a great video! Thanks!
I believe Ballistol has it's uses in gun cleaning. I usually blast the entire gun with it, then use a cleaning brush , then completely wipe it dry, then apply the Wilson ( or whatever) lube , and call it clean and ready. Ballistol does not harm plastic or wood or leather either.
yeah I was wondering why he was using ballistol like that. He needs to spray it on everything and then tell us how easy/hard it was to do the entire gun. Because im sure the sprayer will be much better in that case. He seems like a young kid just learning about guns trying to teach people.
@mike-oh7pz I mentioned specifically in the video that I was looking at it's lubricant properties. Project Farm does the same thing when comparing gun oil. Also, he doesn't wipe the Ballistol dry to test it. If you're going to use it as a lube, the contact surfaces need to be wet regardless of what the "wipe it completely dry" guys say. It's mineral oil; it's completely legitimate to do this. I wasn't going to put Ballistol in a needle oiler just for this video. Yes, when cleaning, if's fine to spray it everywhere and wipe it down. That wasn't the point of the video though. Wrong on me being a young kid (unless middle age counts as young) or just beginning to learn about guns. That just a condescending way of trying to dismiss someone.
They actually use a pharmaceutical grade Ballistol. Different packaging, different product. But when Ballistol was originally developed by the German military, it was used for gun maintenance and first aid, and that formula has remained to my knowledge, though it's not approved for medicinal use in the US. So your mileage may vary.
Guys i can vouch for Ballistol. I tried it because i saw it on the shelf. Keeps my guns from rusting better than anything i’ve tried lo’ these many many years. As far as the cleaning schedule i keep my guns like new clean because is easy and fun mostly. No biggy really why not when you’re watching Hickok45 and any other of the popular gun channels.
When ballistol dries it leave a layer behind to protect and preserve.Your actually supposed to wipe it dry when you are done applying it. Same as any gun lube. Don’t just leave a dab of oil on there.It’ll just collect dust and unburnt powder. Just using pure mineral oil from a local drugstore works well also or synthetic motor oil.Modern gun metals and alloys are made very well and will not wear out if you just regularly clean and very light lube.
I run my guns wet (I have 7 Wilson Combat’s) and their oil is excellent however, I use Ballistol for everything and as long as there’s lube, your gun is protected. On range days when I am firing hundreds of rounds, simply spay a little down the rails when I’m reloading and you will never have a problem no matter what you use.
Thanks for the video. I’ve also used Ballistol for a long time. I love it’s cleaning abilities, and protective coating. also really enjoy how it seems to rejuvenate and darken, almost refresh, worn out, metal and plastic on my firearms. Similar to a vinyl/metal restorer or something. I’m also very interested in this new Wilson combat light oil that you’re using, I’m not a huge fan of the seepage and oil splatter everywhere as you are. what do you think about me continuing to use ballistol as my cleaner, thoroughly wiping down all components, then using the new light oil from Wilson combat as my lubricant. I’ve heard not to mix certain products. I love how the light oil stays where you apply it. Thanks for any feedback
@White Buffalo I've had no issues doing the exact process you describe. Wilson Combat also makes a carbon remover and bore cleaner so I eventually switched to those for deep cleaning.
I use Ballistol for cleaning and lubricate with 5W motorcycle fork oil. I have a stable of motorcycles so always have a large stash of fork oil. Seems to work very much like Wilson gun oil (which I've used in the past). Motorcycle fork oil is formulated for sliding metal parts and is also formulated to be gentle on rubber seals. $20.00 will buy a liter of fork oil.
@John Handhxjxks Nah, you can use it in any way possible. It’s universal. I don’t think other cleaners can beat that… But whatever suits you, is what is best for you my guy.
Ballistol is awesome for the out side of you firearms. Wood stocks, plastic stocks, leather straps,bluing ect . And its none toxic. But for all the internal parts. I use a good synthetic lubricant. I use my weapons often and they do get abused . But I do spend time cleaning and taking care of them. They are not cheep! And we do depend on them when we squeeze that trigger.
You can soak your parts in a Ballistol solution (from the non aerosol version) of 2 parts Ballistol and 8 parts water if you like to take apart your gun once in a while to do a full deep clean… that thing works wonders.
Great video! But I wouldn't be too nervous about "over-cleaning". Larry Vickers did a great video called "the myth of over lubrication" here on UA-cam and demonstrated that it's far more likely for a gun to malfunction from being too dry rather than being too wet. The only part on my guns that's really ever dry is the barrel/chamber. I have never had any malfunctions because of it.
I use Ballistol for cleaing guns that have been shot with corrosive primed ammunition. I mix it with water at 10:1, then place the solution in a spray bottle, then douse the bore and firing mechanism to flush the salts. I then procede to clean the gun as normal. I acually like the smell. For general cleaning of guns, I use Ed's Red, and then lube the gun with unused engine oil.
Quick background, I shoot a lot of suppressed 5.56 with a DI gun for work. Typically, I have to reapply lube at least once, usually twice a day when at the range, primarily using BreakFree CLP. So a couple weeks ago I tried using Ballistol for the first time while the rest of my mates stuck with the CLP. Needless to say, like clockwork, when everyone’s weapons starting gumming up and experiencing malfunctions, my weapon was still running slick and relatively clean….I am a huge believer in Ballistol now.
Ballistol is technically not a lubricant. It works as a lubricant to a certain degree and it was developed for weapons with much looser tolerances than modern firearms. It was meant to be an all-in-one, safe, field-friendly product. And it fits that bill to a tee. There's also a fair bit of myth surrounding the need for incredible lubricants in firearms, especially semi-automatic ones. You could lubricate most guns with any liquid and they would run just fine. So it really depends what you want. I really like the Wilson lubricants, but I only run them in my rifle because they are terribly toxic. I only use Ballistol for field cleaning or quick tune ups at the range because it's incredibly convenient. For my carry pistols that contact my skin often, I use skin-friendly products like Battleborn solvent and ALG GoJuice 0000 grease.
I do a light coat, very very light coat, of ballastol in all my piston and carbon infested area of my Beretta 400 sporting shotgun. I now clean it so much easier then before.
SOLGW Spec76 dedicated lubricant. The BEST without question. Runs perfectly fine low temp and actually re-lubricates in high heat/friction while firing. Protects metal on metal better than any other, lasts longer and wipes right off. I used to be a huge fan of mil-comm grease. At the time it was the current best but then Mike released spec 76.
I use Free-All penetrating lube spray to remove carbon from the moving parts and to clean the barrel from carbon, lead and copper fouling. I mix Lucas red and tacky grease, Rem oil and Ballistol together to make a light grease for the moving parts
Been using shooter lube for a couple years now I like it alot just spray wipe oil done and it dont smell so I can clean my guns in my room relaxed and comfortable and not get yelled at for fumes
Lenny Magill of the Glock Store has a great 19 minute video on how he lubricates his Glocks with Gun Butter. After cleaning your gun with Ballistol you could do what Lenny does to lubricate your gun.
3-1 oil. Can be purchased at any hardware store or big box store. It’s cheap and does a heck of a job. It’s been around since the 1800’s. Was used in ww1 as a lubricant for the US military. It will work great for 99% of gun guys. If not 100%.
Very interesting.I purchased the oil instead of the aerosol.The gun shop said it is better but I have no idea why? Can you please explain? Greetings from South Africa.
Heres the deal, some people like chocolate some like Vanella, with cleaners for firearm's same thing some use this some use that, bottom line have fun shooting your firearms and clean them when your done just that simple, myself been using Ballistol for years, don't matter because I clean my firearms EVERY time I use them!
I realize this is an older video.But I wanted to make the comment of why I used ballistol. It's nice to have a product that can be on any firearm that you have instead of multiple cleaners for individual firearms. Along with modern smokeless firearms, I also shoot black powder cartridge and percussion and flintlocks. Petroleum based cleaners don't work well with black powder residue. It will turn into a hard black tar like substance and gum up all moving parts that the black powder gets into and can be a real pain in the a_s to clean. Also, if shooting surplus corrosive ammo modern Petroleum cleaners don't break down the corrosive salts left behind after cleaning, water does. (The oil used for the M1 Garand was water-based) And a mixture of ballistol and water is perfect for that purpose. I will use more modern cleaners for removing copper fouling (old #9), but that is it.
I somewhat switched from Hoppes No9 to Balistol as a cleaner and protectant but I use Corrosion X as my lubricant after I use either Balistol or Hoppes
I can buy Ballistol at my local shop, Wilson I can’t. Could I buy it online? Sure. However, I buy at the small mom and pop stores most of the time, and I hate waiting for my orders to arrive.
The ballistol smell has grown on me. I really like the stuff, admittedly, I don’t know a lot about fire arms. I just know I enjoy using ballistol then every other product iv ever used. Maybe it’s the nontoxic aspect of it. I wipe down my guns entirely with it. I feel it protects them well. I’d like to see some scientific tests how well it protects from wear.
@Driwer Thanks for commenting. I mention and link to Project Farm's video on gun oils where he goes in depth on testing them. The link to that video is here: ua-cam.com/video/0z8HhRhVSE4/v-deo.html
Use Ballistol because it's not expensive here and it works. I didn't like the smell and the taste is disgusting but I used it on wounds and it works there too, so it's OK for me.....
Wilson's Ultima lube was one of the first gun oils I bought in the late 90's after buying my first handgun. I still have the original oil and still use it occasionally. I may have to get some of the newer stuff to try out.
Motor oil and gasoline are probably what Arabs use to keep their AKs running. The same stuff that keeps their Toyota trucks going! Nothing wrong with that!
M pro 7 cleaner (because I just always have). But for lube, I use Lucas for pistol because it's thick and doesn't run out into my holster or on my body while carrying, and slip 2000 for rifle because it has no odor, isn't sticky, and doesn't seem to attract dust at all and I never need to reapply between cleanings. I used to literally only use 3 in 1 oil because it's one of the best things that God has ever invented. But you soon realize how much odor it has when you start firing an AR-15 full of it lol
@Cyborg Nation Thanks for commenting. Great point about oil and lubricants running into holsters or onto skin/clothing while carrying. That's exactly why I like gun oils that stay put.
Ballistol is a great cleaner I love it as a cleaner and I use it. It is NOT a good lubricant. I was experiencing excessive internal wear on my AR's and couldn't figure out what the hell was going on. A friend gave me his Lucas CLP and the wear stopped. I have also used Riptide Armory CLP and it's a great lubricant and cleaner. I feel Ballistol ruined two of my guns because I was stupid and thought is was good at everything. After I clean, whether with Ballistol or Hoppe's or whatever, my final run is with Lucas or Riptide.
After watching a test video on a different UA-cam channel it showed that Ballistol isn't good with a anti wear protection and in the test for that the two best for anti wear was clenzoil and extreme force so that is what I've been using for awhile plus it had a good rust protection but the test never showed the Wilson combat so it could be better then those two brands
Thanks for commenting. Wilson Combat has an old video where they compare Ultima Lube to several different lubricants. See here: ua-cam.com/video/JEb5xRxMII8/v-deo.html
I use Ballistol as my "WD-40" for knives, hinges, chains, leather, wood and other uses. I'll still always have a can of Ballistol as generic oil, but I think there are better alternatives for just guns. I think Slip2000 is a better gun lube and rust preventative, but costs twice as much. Supposedly Clenzoil is the new hawtness despite being around since after WW2 but is now just getting wide exposure.
cleaning is hoppes. lubes are either try flow or a dry moly . same things i use on my boilers and chillers. oil gathers dust and other debris . a dry lube will not do that or care about tempiture
You spray the Ballistol on a paper plate or bench or whatever, then use a q-tip or the straw sprayer to pick up some Ballistol and apply it to your firearm. Also, Ballistol penetrates and protects the metal. After years of use, my firearm barrels and contact points are as slick as can be - even when apparently dry. Petroleum products can’t do that. Finally, oil is the worst dirt magnet there is. You like cleaning your firearms, so you don’t mind the nasty oil and dirt build up. With Ballistol, I can wipe the dirt clean with a rag and couple of bursts and my guns are clean.
I like the breakthrough solvent and grease….. the solvent cleans and dries up, the grease stays put and doesn’t migrate. Plus both products have very little smell.
I know it is quite expensive but I use ALG Defense Go Juice for my guns. I use a tiny amount of breakthrough clean battle born HP for my magazines springs.
I’m certain there are better lubricants, but most of them are highly toxic. I use Ballistol on everything now, including my knives, my home can opener, my shoes, my belt, and on my hands when they get dry. Best thing is, I don’t have to worry about my cat dying if he inadvertently licks some, and I, myself, don’t have to worry about getting cancer, or becoming a mutant.
Just because your gun goes dry when shooting doesn't mean that it won't continue to shoot lol. Just keep shooting unless it jams, then spray it some more
Wilson product is best for CCW or modern range gun. Balistol is best or so many guns that are historic, to be paased down or in humid environment or long term storage. Have an old gun with wood, steel and leather? Balistol.... Have a glock, a ccw or range gun, the Wilson lube works great.
Ballistol is great, this other stuff is probably fine too. Honestly, after a few tours in the middle east seeing people use everything from spit and used motor oil, to fancy match grade oils successfully, I really don't care. If it keeps the water out and the gat running, it's fine.
Great intro to video and objective. I have and will always have Ballistol for certain applications. If I was forced to only have one gun cleaning/lube/protect product I'd go with Ballistol. If in military would go with BreakFree if only one. But I use a couple of things personally usually. I'd bet the Wilson lube is very good but Im not trading it for Ballistol based on video.
I've noticed at the competitions I go to that most guys who shoot a lot are using motor oil. I wonder if we are overthinking and overpaying for these wonder gun lubes.
@Web Gem Thanks for commenting. I know Brownells says it works fine as a gun lubricant, but since it does not have rust inhibitors, it's not the best for the outside of the gun.
Ballistol is average in cleaning, lubrication and protection, but it is food proof and will not damage your skin or health whatsoever. If i really want to clean a firearm i dont use clp, i use Ballistols Robla Solo Mil, basically Ammonia based cleaning agent, very good at removing copper and brass from the rifling of a barrel. For lubrication either a thick oil (some use engine oil which does work) or a grease with ceramic additives works best, for protection you want grease, not oil.
I use ballistol specifically for a cleaner and preservative. For semi autos full autos I use other stuff. Ballistol has served my family well for going on 4 generations. I have the firearms in my safe to prove it.
Good video 👍. But what does Ballistol "penetrate"? Not steel, since steel is comprised of compressed crystals, not pores. Here's something that will blow minds...I served as a certified Chief Weapons Armorer at my law enforcement agency before I retired. Been to many Armorer's courses. I CLEAN all of my guns with Hoppe's #9. Oil or lube? Haven't used "lube" on any gun in nearly 20 years now. I've put over 7,500 rounds thru my EDC. It's never had a single malfunction of any kind, no parts replaced, no dimensional changes (wear) in any component, and I've never put a drop of oil or lube on it at all. I simply keep it clean, that's all.
Thanks! I appreciate the feedback. I was just reading the label, but I'm assuming other materials (i.e. wood, leather) since it's advertised as multi-purpose.
I could do something similar to the Sig P220 I carried on duty for 17 years I think you should have included what firearm you are using as some firearms now produced require lubrication, others like a Glock can get by without.
You refer to lube only properties and using up your last can of ballistol so what exactly are you using for cleaning purposes?? So why not clean with ballistol and have that coat of protection to prevent rust, and then use the other lube to lube the moving parts? It still has to be cleaned. That's my point.
@RHPVideo That's exactly what I did with what I had left of it. Wilson Combat's Ultima-Lube line has a bore cleaner and carbon remover and I have been using those since then.
I put 10W-40 motor oil on a q-tip than clean my guns never jams and keeps from carbon build up, it’s not the best thing but at the end of the day use what ever lubricant you have cause in the real world in a real fire fight I’d rather have WD40 that a bone dry bolt anyday.
Thanks for the feedback and for commenting. Two great "smyth busters" videos from Brownells on motor oil and WD-40: Is Motor Oil a Good Substitute for Gun Oil? - ua-cam.com/video/eab-5O4u93A/v-deo.html Is WD-40 a Good Lubricant for Guns? - ua-cam.com/video/S235PuthzmU/v-deo.html
Düüüüde. A German here, hi :D Ballistol is not „a lubricant“ it is a universal oil, meant for cleaning, light rust protection and it will lubricate enough, if you find yourself „in the field“ without your gun grease. And a big point why ballistol is so big in germany and all over the world is that it is absolutly nun toxic. No Problems with cleaning your gun and holding the stock into your face or using it on your carbon steal knife you cut your food with. It is even meant to be used on wounds to desinfect them. Ballistol GunCer would be more of their lubricant line. It is a petrol based ceramik oil.
@Daweed I specifically say in the video that I am considering how well both products work as a lubricant - one of properties of a clp. Ballistol is essentially mineral oil with various alcohols and a few additives. "Ballistol" literally comes from the words "ballistic" and "oleum," the Latin word for oil. It's been advertise as an oil, multipurpose oil, miracle oil, and a lubricant by Ballistol. The video compares how well both products work as a lubricant. Unless your beef is comparing a mineral oil based vs petroleum/synthetic blend, then it's not apples and oranges to compare how both products which are advertised as lubricants work as lubricants.
I'll stick with my Ballistol but that's just preference. Stuff hasn't been around over 100 years on accident and this is one thing the Germans got right. Lol
You can’t over clean a gun. It’s either clean or it’s not. If you use a nylon brush and clp you can clean it as much as you want. Just once every six months (assuming you shoot over 100rd a month) use a bronze bore brush with hoppes or copper solvent, good degreaser (powder blast or even dawn dish detergent will work) Edit: also dawn was used to clean the oil off of ducks during an oil spill. Spend more time with your wives!
I can vouch for dawn in another area. Allow me to share. I worked as a crawlspace guy, we did "mold remediation" and we used this stuff called shockwave to kill mold spores. Let me stop now and say this whole business was complete bullshit, k back to it, my boss later told me shockwave was kinda useless and the best way to get rid of mold on surfaces was to get dawn dish detergent and mix it with like 3 parts water. Worked wonders. After I stopped working there, i started telling people dawn was the shit for mold and not to call those scam ass companies
Dust is a real problem for me. Anyone that lives in the desert can tell you oil attracts dust like a magnet. Why oil bath air filters were used effectively by the military instead of paper filters which would clog. Early VW Beetle's used them also. They cost almost nothing to maintain. Hmm
Sometimes (most of the time) you want it to seep into friction points that you cannot get to easily without dissembling. Also, if it’s seeping into your range bag, you’re using way too much.
@John Viera No, I want it staying where I put it. There's just better stuff out there. I think Project Farm really has the definitive video showing that Ballistol is at best middle of the road on several fronts.
Probably splitting hairs deciding which lube is the best. As long as you are maintaining your firearm with regular cleanings and lube the appropriate parts, it will be a mostly irrelevant which product you choose. Assuming its a product designed for this purpose of course.
@myantispambox As I mentioned in the video, I was just considering the lubricant properties. Wilson Combat also has a bore cleaner and carbon remover in their Ultima-Lube line. Point taken on the carcinogen issue and there are things like nitrile gloves to mitigate that. With that said, if you're really concerned about carcinogens and health hazards, firearms are not the best of things to be around.
I’ve been loyal to the brand since it was first introduced to me back in the early 1990s. It has been the only thing I’ve used on my pistols and rifles. (The first case I bought was from an HK parts dealer that told me that German shooters swear by the stuff.) Needless to say, I just ordered another case 12/08/2021 today…
Thanks for commenting and for your feedback!
You know if Germans swear by it, it’s good stuff! They know quality..
I have been watching Hickok45 for years. Always seen him rave about Ballistol. When it was time to get my Own Firearms I ordered Ballistol too. I’ve currently got a SIG P320 X Five and a Desert Eagle, all I use is Ballistol. Spray them up crazy, let them sit for a bit, wipe or brush everything off very dry, then apply key dabs of Ballistol back on to directed points of the Firearms very lightly with a Cotton Tip, reassemble and that’s it. Zero Malfunctions at the Range from both Firearms with this method. 100% Endorsement.
Thanks for commenting.
Clean your gun with Hoppe's #9 after the Ballistol and you will see how dirty your gun was
I use ballistol for surface cleaning and protection, clp for moving parts lubrication. Ballistol works way better for rust protection then breakfree clp in my experience. I think ballistol works really well for protecting blued steel or blued guns generally. brought a new shine out of my mossberg. I also agree ballistol stinks, but you kinda get used to it/grow to like it 🤣
Thanks for the feedback and for commenting!
Use whatever gets your gun clean and keeps your gun operating. For me, Ballistol does a great job and it's what I always use. I dig the smell too. On a side note, I love the way those Berettas look - they seem like solid firearms, need to get one!
Thanks for commenting! I appreciate it.
I love my M9 Brigadier, just kind of a pain to get holsters since it's slightly differently shaped and thicker, but I think it's worth it for the replaceable sights.
That's the only thing I hate about ballistol is the smell,to me it smells like dirty feet and wet dog lol,I wish it smelled like wd40.
Ballistol does magic on leather and plastic parts, doesn't damage them, my second best choice is Froglube, smells great and doesn't damage plastic and wood.
@@bazookajoe8524 GET THE FROGLUBE IF YOU LOVE GOOD SMELL AND WORKS GREAT ON CLEANING CABON BUILD UP.
I used to use Ballistol. I recently bought a couple of plastic bottles with needle applicators. I put Mobil 1 in one and Ballistol in the other. If the applicator sits for any length of time, the Ballistol needle would be plugged. The Mobil 1 needle never dried and plugged. Mobil 1 will not leave a dried sticky mess under the grips.
@markshapona6732 Thanks for commenting. I've had the same experience with Ballistol becoming gummy and sticky.
There are so many quality cleaners and lubes on the market. I don't know if it makes that much difference. I like Ballistol. It's works well, and is safe for those guns that have wood stocks and grips.
I tended to agree that they all are basically the same until I tried something different. I didn't know what I was missing just sticking with Ballistol.
I was introduced to Ballistol when I started into cap and ball pistols and Black Powder. It has taken me awhile to sort out its best uses, but ultimately I use Ballistol to clean my guns, and use it liberally as a rust preventive and corrosion inhibitor on the Black powder guns.
I use all Wilsons lubes to assemble my 1911's and semi automatics exclusively, and use the Wilsons grease on the center cylinder steel rod in my Black Powder pistols.
Both have their place, and thought this was a great video! Thanks!
Thanks for watching and commenting. I appreciate it.
I believe Ballistol has it's uses in gun cleaning. I usually blast the entire gun with it, then use a cleaning brush , then completely wipe it dry, then apply the Wilson ( or whatever) lube , and call it clean and ready. Ballistol does not harm plastic or wood or leather either.
Thanks for the comment and feedback!
yeah I was wondering why he was using ballistol like that. He needs to spray it on everything and then tell us how easy/hard it was to do the entire gun. Because im sure the sprayer will be much better in that case. He seems like a young kid just learning about guns trying to teach people.
@mike-oh7pz I mentioned specifically in the video that I was looking at it's lubricant properties. Project Farm does the same thing when comparing gun oil. Also, he doesn't wipe the Ballistol dry to test it. If you're going to use it as a lube, the contact surfaces need to be wet regardless of what the "wipe it completely dry" guys say. It's mineral oil; it's completely legitimate to do this. I wasn't going to put Ballistol in a needle oiler just for this video.
Yes, when cleaning, if's fine to spray it everywhere and wipe it down. That wasn't the point of the video though.
Wrong on me being a young kid (unless middle age counts as young) or just beginning to learn about guns. That just a condescending way of trying to dismiss someone.
Greatest advantage of Ballistol: absolutely safe for human health! Also, a fine skin medication. German surgeons treat diabetic ulcers with it.
Thanks for commenting!
They actually use a pharmaceutical grade Ballistol. Different packaging, different product. But when Ballistol was originally developed by the German military, it was used for gun maintenance and first aid, and that formula has remained to my knowledge, though it's not approved for medicinal use in the US. So your mileage may vary.
Guys i can vouch for Ballistol. I tried it because i saw it on the shelf. Keeps my guns from rusting better than anything i’ve tried lo’ these many many years. As far as the cleaning schedule i keep my guns like new clean because is easy and fun mostly. No biggy really why not when you’re watching Hickok45 and any other of the popular gun channels.
Thanks for commenting.
When ballistol dries it leave a layer behind to protect and preserve.Your actually supposed to wipe it dry when you are done applying it. Same as any gun lube. Don’t just leave a dab of oil on there.It’ll just collect dust and unburnt powder. Just using pure mineral oil from a local drugstore works well also or synthetic motor oil.Modern gun metals and alloys are made very well and will not wear out if you just regularly clean and very light lube.
I run my guns wet (I have 7 Wilson Combat’s) and their oil is excellent however, I use Ballistol for everything and as long as there’s lube, your gun is protected. On range days when I am firing hundreds of rounds, simply spay a little down the rails when I’m reloading and you will never have a problem no matter what you use.
Thanks for the feedback!
Slip 2000 EWL 30 is nice and thick and also doesn’t run or leak out anywhere. That’s what I’m using now.
Thanks for commenting!
Good stuff
Thanks for the video. I’ve also used Ballistol for a long time. I love it’s cleaning abilities, and protective coating. also really enjoy how it seems to rejuvenate and darken, almost refresh, worn out, metal and plastic on my firearms. Similar to a vinyl/metal restorer or something. I’m also very interested in this new Wilson combat light oil that you’re using, I’m not a huge fan of the seepage and oil splatter everywhere as you are. what do you think about me continuing to use ballistol as my cleaner, thoroughly wiping down all components, then using the new light oil from Wilson combat as my lubricant. I’ve heard not to mix certain products. I love how the light oil stays where you apply it. Thanks for any feedback
@White Buffalo I've had no issues doing the exact process you describe. Wilson Combat also makes a carbon remover and bore cleaner so I eventually switched to those for deep cleaning.
I use Ballistol for cleaning and lubricate with 5W motorcycle fork oil. I have a stable of motorcycles so always have a large stash of fork oil. Seems to work very much like Wilson gun oil (which I've used in the past). Motorcycle fork oil is formulated for sliding metal parts and is also formulated to be gentle on rubber seals. $20.00 will buy a liter of fork oil.
@stevem5383 Thanks for commenting. I appreciate it.
Ballistol has proven record.
Thanks for commenting.
@John Handhxjxks it's been around since like WW1 and has been used around the world since.. asshat!
@John Handhxjxks Nah, you can use it in any way possible. It’s universal. I don’t think other cleaners can beat that…
But whatever suits you, is what is best for you my guy.
Well, technically it lost the war...
Germans lost the war BOBBY .
Ballistol WON hearts of shooters and hunter ALL OVER THE WORLD.
Ballistol is awesome for the out side of you firearms. Wood stocks, plastic stocks, leather straps,bluing ect . And its none toxic. But for all the internal parts. I use a good synthetic lubricant. I use my weapons often and they do get abused . But I do spend time cleaning and taking care of them. They are not cheep! And we do depend on them when we squeeze that trigger.
Thanks for commenting!
You can soak your parts in a Ballistol solution (from the non aerosol version) of 2 parts Ballistol and 8 parts water if you like to take apart your gun once in a while to do a full deep clean… that thing works wonders.
Great video! But I wouldn't be too nervous about "over-cleaning". Larry Vickers did a great video called "the myth of over lubrication" here on UA-cam and demonstrated that it's far more likely for a gun to malfunction from being too dry rather than being too wet. The only part on my guns that's really ever dry is the barrel/chamber. I have never had any malfunctions because of it.
Thanks for the feedback and for commenting!
I use brake clean on all my gun parts and used motor oil as lubricant, never had an issue
Post apocalyptic gun maintenance
I have way too many guns and shoot too often to use fancy oil. Motor oil has worked just fine for me and it's way cheaper
What weight of motor oil do you use on your guns? Thinner, thicker, or just whatever your vehicle is running at the time?
@@somethingtrulyhorrifying 5w30 usually
Amen to that! Mobil 1 works perfectly, no matter the weight. Never let me down.
btw you can buy Ballistol in a form that lets you apply small drops of oil. Its called "Punktöler" or "Ölstift".
I use Ballistol for cleaing guns that have been shot with corrosive primed ammunition. I mix it with water at 10:1, then place the solution in a spray bottle, then douse the bore and firing mechanism to flush the salts. I then procede to clean the gun as normal. I acually like the smell. For general cleaning of guns, I use Ed's Red, and then lube the gun with unused engine oil.
I actually like that it creeps everywhere. Before I shoot, I blow the excess away with an air hose and wipe it off afterwards.. Thanks for the video.
Thanks for commenting! I appreciate it.
Quick background, I shoot a lot of suppressed 5.56 with a DI gun for work. Typically, I have to reapply lube at least once, usually twice a day when at the range, primarily using BreakFree CLP. So a couple weeks ago I tried using Ballistol for the first time while the rest of my mates stuck with the CLP. Needless to say, like clockwork, when everyone’s weapons starting gumming up and experiencing malfunctions, my weapon was still running slick and relatively clean….I am a huge believer in Ballistol now.
Thanks for commenting! I still like Ballistol too.
I've been using ballistol for years as a cleaner, great for knives as well...have always used hoppes oil for lubricant but might give this a try
Thanks for commenting!
I really like Ballistol a whole lot, but I was shocked that it did so poorly in terms of lubricity when tested by ProjectFarm
Agreed. That was an excellent video.
Ballistol is technically not a lubricant. It works as a lubricant to a certain degree and it was developed for weapons with much looser tolerances than modern firearms. It was meant to be an all-in-one, safe, field-friendly product. And it fits that bill to a tee.
There's also a fair bit of myth surrounding the need for incredible lubricants in firearms, especially semi-automatic ones. You could lubricate most guns with any liquid and they would run just fine.
So it really depends what you want. I really like the Wilson lubricants, but I only run them in my rifle because they are terribly toxic. I only use Ballistol for field cleaning or quick tune ups at the range because it's incredibly convenient. For my carry pistols that contact my skin often, I use skin-friendly products like Battleborn solvent and ALG GoJuice 0000 grease.
I do a light coat, very very light coat, of ballastol in all my piston and carbon infested area of my Beretta 400 sporting shotgun. I now clean it so much easier then before.
SOLGW Spec76 dedicated lubricant. The BEST without question. Runs perfectly fine low temp and actually re-lubricates in high heat/friction while firing. Protects metal on metal better than any other, lasts longer and wipes right off. I used to be a huge fan of mil-comm grease. At the time it was the current best but then Mike released spec 76.
Thanks for commenting!
I use Free-All penetrating lube spray to remove carbon from the moving parts and to clean the barrel from carbon, lead and copper fouling. I mix Lucas red and tacky grease, Rem oil and Ballistol together to make a light grease for the moving parts
Thanks for commenting!
Been using shooter lube for a couple years now I like it alot just spray wipe oil done and it dont smell so I can clean my guns in my room relaxed and comfortable and not get yelled at for fumes
Ballistol is great for cleaning but seems to fade quickly under heat from shooting…… thoughts? I still use it
I'd agree with that. I've moved away from using Ballistol at all. I think it was marginal in performance in all three categories as a clp.
Lenny Magill of the Glock Store has a great 19 minute video on how he lubricates his Glocks with Gun Butter. After cleaning your gun with Ballistol you could do what Lenny does to lubricate your gun.
The best combination is Ballistol for surfaces and bore cleaning, and Clenzoil for moving parts lubrication.
Thanks for commenting!
3-1 oil. Can be purchased at any hardware store or big box store. It’s cheap and does a heck of a job. It’s been around since the 1800’s. Was used in ww1 as a lubricant for the US military. It will work great for 99% of gun guys. If not 100%.
Use the ballistol oil instead of the aerosol. It's a different experience.
Thanks for commenting! I appreciate it.
The liquid one is the genuine and much better. No need to shake it before use. The ingredients do not seperate staying still.
Agreed. I use mine with a precision oiler with a needle tip and it doesn't get all over the place as much as the spray can would.
Very interesting.I purchased the oil instead of the aerosol.The gun shop said it is better but I have no idea why? Can you please explain? Greetings from South Africa.
I use G96 Liquid gun Grease for Lube and G96 Gun Treatment spray for cleaning . I also use Breakthrough MIL GRADE solvent for filthy guns .
Thanks for watching and for commenting!
I'm using Ballistol as a cleaner rather than an oil / lube, and it is doing better than my Napier cleaner. Still looking and still learning!
I agree, it's a great cleaner.
Thanks for your review!
My pleasure!
Heres the deal, some people like chocolate some like Vanella, with cleaners for firearm's same thing some use this some use that, bottom line have fun shooting your firearms and clean them when your done just that simple, myself been using Ballistol for years, don't matter because I clean my firearms EVERY time I use them!
Thanks for commenting.
I realize this is an older video.But I wanted to make the comment of why I used ballistol.
It's nice to have a product that can be on any firearm that you have instead of multiple cleaners for individual firearms.
Along with modern smokeless firearms, I also shoot black powder cartridge and percussion and flintlocks.
Petroleum based cleaners don't work well with black powder residue.
It will turn into a hard black tar like substance and gum up all moving parts that the black powder gets into and can be a real pain in the a_s to clean.
Also, if shooting surplus corrosive ammo modern Petroleum cleaners don't break down the corrosive salts left behind after cleaning, water does.
(The oil used for the M1 Garand was water-based)
And a mixture of ballistol and water is perfect for that purpose.
I will use more modern cleaners for removing copper fouling (old #9), but that is it.
Thanks for commenting.
When the ballistol runs/leaks I usually just use that excess to shine up the gun lol.
That's one solution. Thanks for commenting!
I don't usually use any kind of CLPs. The C and the L are opposite of each other. First use a designated C, then a designated L.
Thanks for commenting.
I somewhat switched from Hoppes No9 to Balistol as a cleaner and protectant but I use Corrosion X as my lubricant after I use either Balistol or Hoppes
Thanks for the feedback. I appreciate it.
I can buy Ballistol at my local shop, Wilson I can’t. Could I buy it online? Sure. However, I buy at the small mom and pop stores most of the time, and I hate waiting for my orders to arrive.
Thanks for commenting. I completely understand hating to wait on orders.
I have been using Ballistol for 17 years without any flaw. It has track record since WW 1.
Thanks for commenting!
The ballistol smell has grown on me. I really like the stuff, admittedly, I don’t know a lot about fire arms. I just know I enjoy using ballistol then every other product iv ever used. Maybe it’s the nontoxic aspect of it. I wipe down my guns entirely with it. I feel it protects them well. I’d like to see some scientific tests how well it protects from wear.
@Driwer Thanks for commenting. I mention and link to Project Farm's video on gun oils where he goes in depth on testing them. The link to that video is here: ua-cam.com/video/0z8HhRhVSE4/v-deo.html
I LOVE Ballistol's smell
Use Ballistol because it's not expensive here and it works. I didn't like the smell and the taste is disgusting but I used it on wounds and it works there too, so it's OK for me.....
Thanks for commenting.
on wounds? i thought that was wd40 territory?
It's not just straight mineral oil. Look at the ingredients list on the Wikipedia page for Balistol.
Wilson's Ultima lube was one of the first gun oils I bought in the late 90's after buying my first handgun. I still have the original oil and still use it occasionally. I may have to get some of the newer stuff to try out.
It's definitely worth giving a try.
You may have to shoot more brotha
Best lubricant I have tried is Weapon Shield, it's also non-toxic.
@Leo Guy Thanks for the feedback.
I use motor oil to lubricate firearms . Amsoil 10w30 synthetic and a quart will last for so many years. Its personal preference what to use.
Thanks for the feedback and comment! I appreciate it.
Motor oil and gasoline are probably what Arabs use to keep their AKs running. The same stuff that keeps their Toyota trucks going! Nothing wrong with that!
M pro 7 cleaner (because I just always have). But for lube, I use Lucas for pistol because it's thick and doesn't run out into my holster or on my body while carrying, and slip 2000 for rifle because it has no odor, isn't sticky, and doesn't seem to attract dust at all and I never need to reapply between cleanings.
I used to literally only use 3 in 1 oil because it's one of the best things that God has ever invented. But you soon realize how much odor it has when you start firing an AR-15 full of it lol
@Cyborg Nation Thanks for commenting. Great point about oil and lubricants running into holsters or onto skin/clothing while carrying. That's exactly why I like gun oils that stay put.
Ballistol is a great cleaner I love it as a cleaner and I use it. It is NOT a good lubricant. I was experiencing excessive internal wear on my AR's and couldn't figure out what the hell was going on. A friend gave me his Lucas CLP and the wear stopped. I have also used Riptide Armory CLP and it's a great lubricant and cleaner. I feel Ballistol ruined two of my guns because I was stupid and thought is was good at everything. After I clean, whether with Ballistol or Hoppe's or whatever, my final run is with Lucas or Riptide.
I've used a lot of different oils. I like the Break Free CLP the best. I have the Ballistol also.
Thanks for commenting
After watching a test video on a different UA-cam channel it showed that Ballistol isn't good with a anti wear protection and in the test for that the two best for anti wear was clenzoil and extreme force so that is what I've been using for awhile plus it had a good rust protection but the test never showed the Wilson combat so it could be better then those two brands
Thanks for commenting. Wilson Combat has an old video where they compare Ultima Lube to several different lubricants. See here: ua-cam.com/video/JEb5xRxMII8/v-deo.html
I use Ballistol as my "WD-40" for knives, hinges, chains, leather, wood and other uses. I'll still always have a can of Ballistol as generic oil, but I think there are better alternatives for just guns. I think Slip2000 is a better gun lube and rust preventative, but costs twice as much. Supposedly Clenzoil is the new hawtness despite being around since after WW2 but is now just getting wide exposure.
I've been using Ballistol in place of WD-40 as well. Works pretty well that way.
Frog lube is my favorite it's skin safe and I've never had an issue with it.
Thanks for commenting! I appreciate it.
I used to use Frog Lube. Stuff will gum up if left for months.
cleaning is hoppes. lubes are either try flow or a dry moly . same things i use on my boilers and chillers. oil gathers dust and other debris . a dry lube will not do that or care about tempiture
Thanks for sharing
You spray the Ballistol on a paper plate or bench or whatever, then use a q-tip or the straw sprayer to pick up some Ballistol and apply it to your firearm. Also, Ballistol penetrates and protects the metal. After years of use, my firearm barrels and contact points are as slick as can be - even when apparently dry. Petroleum products can’t do that. Finally, oil is the worst dirt magnet there is. You like cleaning your firearms, so you don’t mind the nasty oil and dirt build up. With Ballistol, I can wipe the dirt clean with a rag and couple of bursts and my guns are clean.
Thanks for commenting!
I am a big fan of food grade mineral oil for my guns for rust prevention.
@Thomas Golden Ballistol is mineral oil, so you're probably saving money by going that route and it probably works just as well if not better.
@@buildyourarsenal
I learned from @GunBlue490
youtube.com/@GunBlue490
Huge fan
I like the breakthrough solvent and grease….. the solvent cleans and dries up, the grease stays put and doesn’t migrate. Plus both products have very little smell.
Thanks for commenting!
I know it is quite expensive but I use ALG Defense Go Juice for my guns. I use a tiny amount of breakthrough clean battle born HP for my magazines springs.
Thanks for commenting and for the suggestion!
But does Wilson’s emulsify with water or displace it? 5% ballistol and 95% water still lubricates.
I’m certain there are better lubricants, but most of them are highly toxic. I use Ballistol on everything now, including my knives, my home can opener, my shoes, my belt, and on my hands when they get dry. Best thing is, I don’t have to worry about my cat dying if he inadvertently licks some, and I, myself, don’t have to worry about getting cancer, or becoming a mutant.
Thanks for sharing and commenting.
Ballistol is an OKAY lube, but it’s hands down the best preservative
@Tony The Goon Thanks for commenting! I appreciate it.
Ballistol is still more available than Wilson combat, that says something
@Mikehenrybell There are more Fords than Ferraris, that says something.
Just because your gun goes dry when shooting doesn't mean that it won't continue to shoot lol. Just keep shooting unless it jams, then spray it some more
Wilson product is best for CCW or modern range gun. Balistol is best or so many guns that are historic, to be paased down or in humid environment or long term storage. Have an old gun with wood, steel and leather? Balistol.... Have a glock, a ccw or range gun, the Wilson lube works great.
Thanks for commenting!
Ballistol is great, this other stuff is probably fine too.
Honestly, after a few tours in the middle east seeing people use everything from spit and used motor oil, to fancy match grade oils successfully, I really don't care. If it keeps the water out and the gat running, it's fine.
Thanks for commenting
Great intro to video and objective. I have and will always have Ballistol for certain applications. If I was forced to only have one gun cleaning/lube/protect product I'd go with Ballistol. If in military would go with BreakFree if only one. But I use a couple of things personally usually. I'd bet the Wilson lube is very good but Im not trading it for Ballistol based on video.
@allbee83 Thanks for sharing your feedback and your thoughts. I appreciate it.
Of its good enough for Hickok45, its good enough for me 😊.
Haha, what a coincidence! Same thing here with me. Beretta 92 Ballistol, then WC lubricant. I use the universal though.
That's awesome!
Ballistol, Rem oil & 3in1 oil ate my faves
Thanks for commenting
I've noticed at the competitions I go to that most guys who shoot a lot are using motor oil. I wonder if we are overthinking and overpaying for these wonder gun lubes.
@Web Gem Thanks for commenting. I know Brownells says it works fine as a gun lubricant, but since it does not have rust inhibitors, it's not the best for the outside of the gun.
Ballistol is average in cleaning, lubrication and protection, but it is food proof and will not damage your skin or health whatsoever. If i really want to clean a firearm i dont use clp, i use Ballistols Robla Solo Mil, basically Ammonia based cleaning agent, very good at removing copper and brass from the rifling of a barrel. For lubrication either a thick oil (some use engine oil which does work) or a grease with ceramic additives works best, for protection you want grease, not oil.
I cleaned my gun in my room and I got a little worried after a few reviews saying it could damage your lung long term am I just being paranoid
I use ballistol specifically for a cleaner and preservative. For semi autos full autos I use other stuff. Ballistol has served my family well for going on 4 generations. I have the firearms in my safe to prove it.
Thanks for commenting.
Good video 👍. But what does Ballistol "penetrate"? Not steel, since steel is comprised of compressed crystals, not pores. Here's something that will blow minds...I served as a certified Chief Weapons Armorer at my law enforcement agency before I retired. Been to many Armorer's courses. I CLEAN all of my guns with Hoppe's #9. Oil or lube? Haven't used "lube" on any gun in nearly 20 years now. I've put over 7,500 rounds thru my EDC. It's never had a single malfunction of any kind, no parts replaced, no dimensional changes (wear) in any component, and I've never put a drop of oil or lube on it at all. I simply keep it clean, that's all.
Thanks! I appreciate the feedback.
I was just reading the label, but I'm assuming other materials (i.e. wood, leather) since it's advertised as multi-purpose.
I could do something similar to the Sig P220 I carried on duty for 17 years I think you should have included what firearm you are using as some firearms now produced require lubrication, others like a Glock can get by without.
If the people who make the guns say to use lube im gonna use lube. Guns have malfs from being too dry over too wet.
Ballistoil nor any other penetrating oil penetrates the metal itself , but it does penetrate between two metal parts like a rusted bolt or hinge.
The only drawback to ballistol is the smell. Can’t stand it in closed rooms. Once I started using it in my garage, problem solved.
Thanks for commenting!
You refer to lube only properties and using up your last can of ballistol so what exactly are you using for cleaning purposes?? So why not clean with ballistol and have that coat of protection to prevent rust, and then use the other lube to lube the moving parts? It still has to be cleaned. That's my point.
@RHPVideo That's exactly what I did with what I had left of it. Wilson Combat's Ultima-Lube line has a bore cleaner and carbon remover and I have been using those since then.
I love the smell of Ballistol in the morning (or anytime for that matter).
I’m glad someone likes the smell of it.
I use Hoppes only cuz I’ve been using it since late 70’s with no issues. Why stop now?
Thanks for the feedback and for commenting.
The non-aerosol liquid Ballistol seems less runny
Thanks for commenting!
I put 10W-40 motor oil on a q-tip than clean my guns never jams and keeps from carbon build up, it’s not the best thing but at the end of the day use what ever lubricant you have cause in the real world in a real fire fight I’d rather have WD40 that a bone dry bolt anyday.
Thanks for the feedback and for commenting. Two great "smyth busters" videos from Brownells on motor oil and WD-40:
Is Motor Oil a Good Substitute for Gun Oil? - ua-cam.com/video/eab-5O4u93A/v-deo.html
Is WD-40 a Good Lubricant for Guns? - ua-cam.com/video/S235PuthzmU/v-deo.html
Düüüüde. A German here, hi :D
Ballistol is not „a lubricant“ it is a universal oil, meant for cleaning, light rust protection and it will lubricate enough, if you find yourself „in the field“ without your gun grease. And a big point why ballistol is so big in germany and all over the world is that it is absolutly nun toxic. No Problems with cleaning your gun and holding the stock into your face or using it on your carbon steal knife you cut your food with. It is even meant to be used on wounds to desinfect them.
Ballistol GunCer would be more of their lubricant line. It is a petrol based ceramik oil.
@Daweed I specifically say in the video that I am considering how well both products work as a lubricant - one of properties of a clp.
Ballistol is essentially mineral oil with various alcohols and a few additives. "Ballistol" literally comes from the words "ballistic" and "oleum," the Latin word for oil.
It's been advertise as an oil, multipurpose oil, miracle oil, and a lubricant by Ballistol.
The video compares how well both products work as a lubricant. Unless your beef is comparing a mineral oil based vs petroleum/synthetic blend, then it's not apples and oranges to compare how both products which are advertised as lubricants work as lubricants.
I love ballistol I buy it by the case!
Thanks for commenting.
I’ve used nothing but balistoll for years 25+
Mobil 1 20w-50 V twin for me. It stays on the metal for quite awhile before gravity overcomes it.
Thanks for the feedback and comment!
I just use wd-40 as my cleaner and hoppes as my lubricant and so far no issues, my uncle who was a hunter used wd for years and never had any issues.
Thanks for commenting.
Blaster, Multi-Max is grrreattttt stuff.
Thanks for commenting!
Iv seen this stuff i think ill clean with ballistol and lube with Wilson
Let me know your thoughts when you get the chance to try out the Wilson Combat Ultima-Lube.
I brush the firearm then use wd40 to get rid of any moisture and dilute and solvents then wipe it off. Then I oil up and wipe it down and oil up again
I like Wilson Combat!
I'll stick with my Ballistol but that's just preference. Stuff hasn't been around over 100 years on accident and this is one thing the Germans got right. Lol
Thanks for commenting!
helpful info, thanks
Glad it was helpful!
You can’t over clean a gun. It’s either clean or it’s not. If you use a nylon brush and clp you can clean it as much as you want. Just once every six months (assuming you shoot over 100rd a month) use a bronze bore brush with hoppes or copper solvent, good degreaser (powder blast or even dawn dish detergent will work)
Edit: also dawn was used to clean the oil off of ducks during an oil spill. Spend more time with your wives!
Thanks for commenting.
I can vouch for dawn in another area. Allow me to share.
I worked as a crawlspace guy, we did "mold remediation" and we used this stuff called shockwave to kill mold spores. Let me stop now and say this whole business was complete bullshit, k back to it, my boss later told me shockwave was kinda useless and the best way to get rid of mold on surfaces was to get dawn dish detergent and mix it with like 3 parts water. Worked wonders. After I stopped working there, i started telling people dawn was the shit for mold and not to call those scam ass companies
@@ballsack8937Yes, dawn is used for a lot of things. I dare anyone to grease their hair back with royal crown pomade and remove it without dawn!
Dust is a real problem for me. Anyone that lives in the desert can tell you oil attracts dust like a magnet. Why oil bath air filters were used effectively by the military instead of paper filters which would clog. Early VW Beetle's used them also. They cost almost nothing to maintain. Hmm
Thanks for commenting
Sometimes (most of the time) you want it to seep into friction points that you cannot get to easily without dissembling. Also, if it’s seeping into your range bag, you’re using way too much.
@John Viera No, I want it staying where I put it. There's just better stuff out there. I think Project Farm really has the definitive video showing that Ballistol is at best middle of the road on several fronts.
i`m using ballistol for cleaning and Wilson oil gor lubing
Thanks for commenting! I appreciate it.
Probably splitting hairs deciding which lube is the best. As long as you are maintaining your firearm with regular cleanings and lube the appropriate parts, it will be a mostly irrelevant which product you choose. Assuming its a product designed for this purpose of course.
Thanks for commenting.
Ballistol is the light and the way.
Thanks for commenting.
Ballistic is good for wood and leather but if going to use. Your plastic it doesn't matter what you use
Thanks for commenting.
I like ballistol as a cleaner and use Lucas gun oil as lube
Good combination!
@@buildyourarsenal thanks
I like to avoid petroleum based lubes (it is likely a carcinogen after all). And this is just an oil, you still need a cleaner.
@myantispambox As I mentioned in the video, I was just considering the lubricant properties. Wilson Combat also has a bore cleaner and carbon remover in their Ultima-Lube line. Point taken on the carcinogen issue and there are things like nitrile gloves to mitigate that. With that said, if you're really concerned about carcinogens and health hazards, firearms are not the best of things to be around.
I have been using Weapon Shield
Thanks for the feedback and for commenting.