Це відео не доступне.
Перепрошуємо.
PLUMBERS VAN TOUR & TOOLBAG TOUR | NEW TOOLS OVERVIEW
Вставка
- Опубліковано 7 січ 2023
- Plumbers van tour and tool bag overview as it’s that time of the year when I completely empty the van and give it a good clean out.
I also empty both my tool bags, good job aswell as they are full of stuff I don’t need.
Also I pick up a few tools that will make life a little easier
#plumbing #tools #tour
Massive Thankyou to my channel sponsor UNILITE….
To save 25% on all Unilite orders type “MJTIFF” at checkout
unilite.co.uk/
Also check out the Trade Legends UA-cam channel-
/ tradelegends
And head to the Trade Legends site for some massive discounts
tradelegends.uk/
Don’t forget to get subscribed to the channel so you don’t miss what’s coming up….😉😉
What name is the table?
@@27forme2 its this one buddy
www.screwfix.com/p/mac-allister-folding-workbench-850mm/2320P?kpid=2320P&ds_kid=92700048793290430&ds_rl=1244066&gclid=CjwKCAiAk--dBhABEiwAchIwkW5j8zYPh68XdKC-P4K9AlWL1iuH6KgGYsbEFDp1m-3iR_bA91E_ihoCe-kQAvD_BwE&gclsrc=aw.ds
Lovely construct MJT .
very neat and thoughtful
Thanks mate
Get an offcut of 4 inch soil pipe mounted high up in your van somewhere to keep offcuts of copper/waste pipe in mate. Done it in mine and it's great for keeping on top of the little bits you build up over time, and keeps them off the deck rolling round in the back of the van. Great vid btw!
Good shout that mate, will give it a go
The rule thumb for tradesmen with tools.. whatever you take out of the bag... Will be the one you need for the next job
LoL
Great video good up the great work 👍
100% mate…… and when it happens I will let you all know, probably be this bloody week🤣
Always a nice feeling after a back of the van clear out, I have had the folding table for years now and I love it.
Yer i think it may come in handy....not sure what for yet though.
I don't usually comment on your videos Mark, even though I've been watching them for ages. I bought loads of Erbauer tools based on your recommendation for my flat renovation and they really are solid bits of kit, so thanks for the tip and all the bits of plumbing knowledge I picked up from watching you, saved me a fortune.
Thanks for watching and commenting mate, great to see you dropping a message.
Yer I like the erbaurer stuff👍🏼👍🏼
@@MJTiffPlumbing av moved t the new ext erbauer 12v cordless power tools from erbauers 18v..really powerful & a lot lighter brilliant bit of kit
Good vid, I've got 3 sheds full of stuff that might come in handy one day! Nothing like the feeling of a tidy van, even though its a mess within a couple of days again!
100% mate, I think someone goes in at night and messes it up🤣
when I was on the road as a engineer I used to have a van clear out every 3 months and it was great ,love this video
I may well do that buddy👍🏼
Really enjoyed this Mark, that folding bucket is worth a buy!
Thanks buddy….. yer proper handy thing, well worth buying
Looks better
👍🏼👍🏼
Happy New year mate.
Enjoyed the video.
Nothing wrong with the so-called cheap tools.
As long as they do the job, nothing else matters
Thanks mate HNY
Have a look at the Am-tech Stubby adjustable spanner. They have gone up to £6 now, but are so handy especially for 15mm compressions in tight spaces...
Top video pal 🙌 nearly bought the erbuear crates a few weeks back when I was looking for a new storage system
Thanks Mac….. grab a few, they are spot on. I’ve ordered a few more
Hi Mark my Record pipe bender is quite old now. It also sometimes creases the pipes. lost more guides than I could possibly remember. So even with new guides it will still crease. However. having tried all sorts of preventative measures. I have noticed that, if I start the bend then relax the guide periodically during the bending process, it seldom creases. I believe this action reduces the drag on the former side.
Makes sense that mate…. Will give it a try👍🏼👍🏼
Great video my good friend happy new year brother
Thanks buddy
@@MJTiffPlumbing your more than welcome my plumber brother
I had a full "no work xmas" this year, even left having a proper sort of my van till last weekend... pleased I have now, but also pleased I actually switched off from work for a short while! Hope all is good with you pal
Great that you had a complete few weeks of time to yourself, a lot to be said for that buddy👍🏼👍🏼
Evening Mark, on the back of watching your vids purchased the millwaukee wet vac and the unilite. Superb pieces of kit and gonna help make my work life so much easier. Keep up the great work mate.
Hey buddy…… Glad you like the content.
The wet vac is a life saver and as always the Unilite gear is spot on…. Great buys mate👍🏼👍🏼
Great Video Mark And Interesting Seeing What Gear You Have In The Now Organised Van👌👍👍
Thanks mate…. Glad you liked it👍🏼👍🏼
Hi Mark, your van is looking much better now, that has helped to settle my ocd and I’m sure you will work more efficiently now it’s tidy.
I hope the call out to your mates job was not too involved. Have a great week, take care, regards, Chris. 👍👍👍
Thanks Chris… yer it’s a lot better now… but for how long I don’t know🤣🫣🫣
Yer the call out job is coming soon😉
@@MJTiffPlumbing looking forward to that film. 👍👍👍
Hi Mark. I have to take my tools out every night cause off the amount vans that have been broken into. So I don’t have tidy my van. But where I put them in the hallway in my house. I have to sort the regular other wise the wife gets the hump. So I sort off feel your pain. Keep them coming mate 👍
I bet the missus loves that mate!!!!!….. better to be safe though👍🏼👍🏼
Hi Mark don't throw out your mono tap box spanners. Some of the threaded rods are extra long for going through worktops but when used direct onto sinks the Nerrad sockets aren't deep enough.
Yep I’ve heard that but have yet to find one that it’s doesn’t fit
They fit the nuts ok but the threaded rod keeps it off the nut.
👍🏼👍🏼
love the van tidy up happy new year mark look forward to 2023 with your journey go an smash 👍👌👊
Hey Mike, thanks buddy. Always nice to start the year fresh and clean
Cracking vid, didn’t realise you did gas again? Noticed the monomitor and leak sorry.
Nice to see a used van and not just a show van
Hope you had a cracking Christmas
Thanks mate….. glad you enjoyed it👍🏼
Did you construct the wooden compartments and storage cubbys in the van yourself ? Smashing work that
I can’t take the credit, they were purchased when I got the van…. Worth every penny
Brilliant vid love it keep them up just need to do the lockup next 😆
Oh I had tried to block the lockup out of my mind…… properly needs doing though🫣
My ocd is so bad I got warm feeling watching this lol, great video as always
Glad you enjoyed it mate…. 👍🏼👍🏼🙏🏼
You can't beat a good sort out mins this weekend just the amount of stuff you carry you don't need but I hate keep going back to the vehicle to get stuff out might get one of the velocity jobbing bags
The Jobbing bag is great buddy…. As long as you don’t overfill it with crap🤣😝
Everything nice and tidy wont be long before its full again always the case when you are busy
I say it every time I clean it out…… “keep it clean and tidy”…
Lasts about a week🤣🤣
The racking fell over in my van on Friday it’s all still there and is a job for Monday 😂
🤣🤣….. You don’t need racking for a bucket and a few trowels anyway mate😉😝
@@MJTiffPlumbing haha! You are right it’s all the other unnecessary crap, you always carry round 😂😂😂
Evening Mark. The 2 most lethal words for a tool bag - "just incase"! 😂. I decided to give my kit a good sort through after Xmas.... 3 hrs later! It's surprising the s***e you can accumulate! 😂😂...
Hahahaah sooo true mate….🤣👌🏼👌🏼
I tend sort the van every Sunday, but had a major sort out just after Xmas, the biggest shock I had was finding two brand new drills in cases that I forgot I’d bought! I buy drills when they’re cheap for the batteries, but how bad is that!
😮😮🤣….. every cloud I guess mate
I was off for 2 weeks paternity leave and 2 weeks for Christmas and van never was opened and had all the best intentions to get it sorted.🤣🤣💪+🔧=🔨
We all have the exact same thoughts over Xmas mate….🤣🤣🤣
@@MJTiffPlumbing might save the video to watch when doing the night feed 🍼🍼
🤣🫣🫣
I have 2 claw hammers in my tools and I don't even remember getting 2 claw hammers 😆 think you've inspired a tidy out
Hahahah….. tools just appear don’t they🤷🏼♂️🤷🏼♂️
I started using the erbaur stuff Mark, like you say, it's good for what we need. Isnt it just a pain doing the van clean after xmas, gonna do mine this week, didn't have time last week. Great vid as usual mate
Thanks mate, can’t fault the Erbaurer gear for the money….
Im back to work tomorrow and im dreading opening the side door of the van in the morning 🫣
Hahahaha I know the feeling, you know what your gonna see mate🤣
Mark happy new year m8, dunno if you know but make sure you put the middle bit underneath up on that table or it’ll fold under bit weight it’s a handle pull up Center bit in the middle shelf area , excuse my cr@p description 🤣🤣
Hey mate, yer I spotted that once I had a play around with it…… think it will come in handy….. somewhere🤣
I do a light clean every weekend but I’m due for a Thorough go through myself. The problem when I use big bags is I put to much stuff in them and just put the stuff I need for the job in a bucket then make 4 or 5 trips back to the truck lol. When I take anything out of my truck it seem like that’s the first thing I need the next day. What’s in the rooftop box ?
Always the way mate…. ALWAYS 🤣🫣
You have spurred me on to sort all my sh1t out. The van needs a bloody good clean, inside and out, just not got much time to get it done.
I know what you mean mate, but put a few hours aside to get it done as it makes you feel so much better….👍🏼👍🏼
I’m pleased you went for the hose Mark.. good aren’t they?
Yep very good mate 👌🏼👌🏼
Hi Mark its archie I'm nine years old get tidying before it gets a proper mess I have handy tools to use and my grandad can't carry my tool bag it's that heavy just telling u
👍🏼👍🏼
brilliant idea on the waste pipe for the bender. why didnt i think of that? i noticed you cut the bulk panel for 3mtr bundles on the floor? quicker faster and slightly more secure. i just sorted my gas bag for analyzer. unbelievable the amount of stuff we carry that we dont need. ive removed the 48" stilson:P i been carrying around for years. joking aside where's your footprint?
love the uploads. onwards..........
Thanks mate, these vans come with a detachable panel on the bulkhead so you can get a 4m length in to this one as it’s the LWB version
Do you think that MacAlister work table would sit over a toilet pan, or would that bottom rail hit it?
I would say the bottom section would get in the way mate
Have you seen Steven lavimoniere youtube plumbers Truck lol, its insane would never fit on the UK roads tho.
No…. Will take a look👍🏼👍🏼
Nice video Mark, I need to get round to sorting my van out
Thanks mate, hope your well.
Yep, it’s something we all think about doing but are usually to bloody busy to do…🤣🫣🫣
Hi mate love the videos ! Any tips for a young lad 19, looking to get into the trade currently looking for an apprenticeship, any tips would be appreciated cheers !
Thanks buddy….
If you have any local plumbing merchants/trade counters….. pop in and ask if they know of anyone looking for an apprentice 👍🏼👍🏼
Nice video 👍 but you definitely need to invest in some knipex cobras and bacho spanner’s I’d never go back to what your using lol go on treat yourself
Will take a look, however to be honest I’ve tried a few Knipex bits and haven’t been that impressed. Will take a look though👍🏼
The Varcity Tote is the Dog’s Danglers of a Tool Bag!!
Thanks for sharing👍👍
Thanks buddy👍🏼👍🏼
I hope you haven’t thrown out your tubular mixer tap spanner’s as I’ve fitted 2 taps before Xmas and the threaded bar was too long for the Nerrad tappex kit.
Just a thought.
Yer I’ve got them in one of the many racking compartments just incase….. I have heard there is a few things the Tapex kit can’t quite work on….. have yet to come across them yet
The only problem so far was the long threaded bar on the mixer tap. I haven't used some of the rest yet.
👍🏼👍🏼
always a mate hahaha
Always ……. Coming soon🫣🫣
Good to see your sensible not buying into the fad and get the latest and greatest milfauky tools ;-) You keep your money for the more important stuff
I can’t fault the Erbauer stuff mate, pound for pound a great buy
Come sort mine out now mark lol
Hahahaa…… I think there is a business in cleaning tradesman’s vans out🤣
Fucking Hell my van never looked like . Half of it fell out at the traffic lights ..
Hahahahah…….. ladders and everything!!!!
🤘😎🤘
Evening mate…. How you doing buddy👍🏼👍🏼
@@MJTiffPlumbing My gear needs a massive sort out 🤣🤣🤣🤣🤘😎🤘
Get to it mate…. It’s good for the mind 😉😉
@@MJTiffPlumbing Van full, 2 containers full, and look like they have been rolled down a hill inside 🤣🤣🤣🤣🤣🤣🤣🤣🤣🤘😎🤘🙏
🤣🤣🫣🫣
Always have mixed feelings about these van tours. While I love seeing what's carried, I can't help thinking these videos tend to highlight what's on board to thieves. Last year, I recall. At least two UA-camrs having their vans broken into after making similar videos...
Yep I know what your saying and it’s a valid point, however if your van is going to get done it will…. I have a vast amount of security where it’s kept including motion sensors/alarms/tracking etc etc
@@MJTiffPlumbingI only mentioned as theft from work vans seems endemic now... I have a real hatred for scum who steal, but particularly those who potentially deprive a person of a living because they've stolen their trade tools...
Bel video
???