I run the graphics department in a decorative glass company. We do all kinds of one off custom projects for corporate friends and owners. I would advise using a thicker glass than comes in cheaper picture frames, it breaks too easily and you can carve a lot more details into 4-6mm thick glass. Most glass shops have lots of scrap that they will give you for free, just recut it to the size you want. You can also light up thicker glass carving by placing led on the polished edge of the glass. Use a little water to cut down on the dust and extend the life of your bits, lol, use a wand to keep from electrocuting yourself. Hope this was helpful, good luck with future carving.
As artist we all make mistakes, pieces that are such a struggle because of human error, yet it always works out in the end. I love posca markers btw they are amazing!
I did this on a mirror for my mom for Mother’s Day. I used a mechanical pencil with a sewing needle in the tip. Pretty cool ship tho even with the break.
I hand engraved glass. I would've chosen a straight bit instead of the round bit. Tape the back of the glass. That helps it not to crack. The vibration from the dremel will crack the glass. I always backed the glass with a dark blue velvet or black. The purple from the stencil should come off with 90% alcohol. Other than that.. great job.
@@virginiawilliams7282 I have a junky dremmel so that was the closest I had to a liner. Next time tho! This was my first time and definitely a learning experience. Thanks for the tips!
@@virginiawilliams7282 that’s awesome. Someone mentioned to me engraving in a shallow puddle inside a Tupperware container. He said the dust over time could collect on things in your room, end up in the air later, and give you breathing issues. Any advice for safety besides a mask?
I run the graphics department in a decorative glass company. We do all kinds of one off custom projects for corporate friends and owners. I would advise using a thicker glass than comes in cheaper picture frames, it breaks too easily and you can carve a lot more details into 4-6mm thick glass. Most glass shops have lots of scrap that they will give you for free, just recut it to the size you want. You can also light up thicker glass carving by placing led on the polished edge of the glass. Use a little water to cut down on the dust and extend the life of your bits, lol, use a wand to keep from electrocuting yourself. Hope this was helpful, good luck with future carving.
As artist we all make mistakes, pieces that are such a struggle because of human error, yet it always works out in the end.
I love posca markers btw they are amazing!
@@emmy16661 agreed. It was a great learning experience.
Me too! I want to get a full set
I did this on a mirror for my mom for Mother’s Day. I used a mechanical pencil with a sewing needle in the tip. Pretty cool ship tho even with the break.
@@Joshwillis291 oh that’s a cool method. I’ll have to try that
I hand engraved glass. I would've chosen a straight bit instead of the round bit. Tape the back of the glass. That helps it not to crack. The vibration from the dremel will crack the glass.
I always backed the glass with a dark blue velvet or black. The purple from the stencil should come off with 90% alcohol. Other than that.. great job.
@@virginiawilliams7282 I have a junky dremmel so that was the closest I had to a liner. Next time tho!
This was my first time and definitely a learning experience.
Thanks for the tips!
@@ThatTattooGuyOfficial No problem. I own about 10 dremels & every tip possible to own. I've engraved everything from shotglasses to large mirrors.
@@virginiawilliams7282 that’s awesome. Someone mentioned to me engraving in a shallow puddle inside a Tupperware container. He said the dust over time could collect on things in your room, end up in the air later, and give you breathing issues. Any advice for safety besides a mask?
Wow good save!!!! That looks great!
How can one purchase some of your art pieces?
@@fortheloveofart5901 thank you ! If you message me on Instagram we could set something up :)
it was like a happy accident, i guess... but i think looks cool at the end of the day.
Haha yes. A frustrating happy accident lol I’m happy with it tho. Always learning