Nice presentation but the video ended just where I needed your idea on how to work with a wider board, I wish you could finish it in another video. I really need it Thank you
Pro tip: Set the bit right at 1/2" is just a half-hair less, or you'll be carving bits of wood off both the pins and tails. Setting the depth gauge a half-hair deep when cutting the pins will make the fit tight.
Your instructions on page 11of the manual are wrong. I lined up exactly as said on the guide edge on the tails side. Then I moved the next piece 1/2 inch to the left and cut again. The result is that the two boards line up and the tail to tail matches for all but the last tail. What gives? It is not user error either. I challenge anyone to follow the instructions on page 11 exactly to get a different result.
Great video and great tool but had to turn the sound off. Why does everyone - not just General - include obnoxious and distracting music in their instructional content. Please please stop the music!
If you're going to add music to your video, please don't use annoying crap like this. It ruined the excellent video. Sounds like the soundtrack from an old Donkey Kong video game.
Revisit in 4K with a macro lens and a second camera guy. I feel like I’m watching Debbie does Dallas on the clarity side of the game.
Time to make a good high resolution video with all the feedbacks & no background noise, as mentioned in manual.
Nice presentation but the video ended just where I needed your idea on how to work with a wider board, I wish you could finish it in another video. I really need it
Thank you
You need to use the plastic tab provided with the tools
The Jig is up !
this music is great. i finally have a soundtrack to kill ants with a magnifying glass to.
Pro tip: Set the bit right at 1/2" is just a half-hair less, or you'll be carving bits of wood off both the pins and tails. Setting the depth gauge a half-hair deep when cutting the pins will make the fit tight.
Sean O'Dell so.... closer to 7/16 would be better instead of 1/2 "strong"
Informative video thanks...background 'music' is distracting.
Your instructions on page 11of the manual are wrong. I lined up exactly as said on the guide edge on the tails side. Then I moved the next piece 1/2 inch to the left and cut again. The result is that the two boards line up and the tail to tail matches for all but the last tail. What gives? It is not user error either. I challenge anyone to follow the instructions on page 11 exactly to get a different result.
Just bought this item today at home depot. Great tool, sad to see it wasn't USA made:(
Wants something cheap and US made lol
I didn't notice the music until I read the comments.
Forget everyone else, this music owns
Why can I not find EZ-Pro tools on the internet?? 800 number ???
Great video and great tool but had to turn the sound off. Why does everyone - not just General - include obnoxious and distracting music in their instructional content. Please please stop the music!
optionable, is not a word... lol!
Great video but the "music" is really, really, really annoying.
Great tool, but too small! Be perfect if was twice as long.
Guess how I learned that?
Freaking music is nerve racking.
Lose the music, and you'll have a decent video
@fastgs1 wear a dust mask then.
If you're going to add music to your video, please don't use annoying crap like this. It ruined the excellent video. Sounds like the soundtrack from an old Donkey Kong video game.
1 John 1:9!
useless tool,,the cutter bit that came with in will not cut but so long,,no need to adjust the depth
I'll buy somebody else's jig; I had to hit the stop button at 48 seconds due to the background "music".
Why did you waste so much time making a video that is so out of focus as to be unintelligible?
Horrible video
I was ready to buy this until I watched this out of focus, disgusting video.
Great video. I was curious how to dovetail. Where can I download the music?