2008 Nissan Versa Transmission diagnostic & FIX (P0746 & P0868 )
Вставка
- Опубліковано 9 лип 2020
- In this video you will be watching of how i easily fix a transmission problem for 2008 nissan versa .This car has a transmission codes of P0746 and P0868 which pertaining to solenoid a and low pressure fluid
Tools & Parts Used:
1. 10mm socket
2. allen keys
3. 19mm socket
4. 6 bottle/liters /quarts os NS2 CVT transmission fluid Motomaster
5. 1 bottle of brake cleaner - Авто та транспорт
Excellent, this is the video that UA-cam has needed for everyone with CVT issues.
thank you..
Have watched several of your transmission videos and enjoy .You are truly helping folks who really are not mechanically inclined to enable them to DIY to help folks that are not able to pay for these types of services due to the high cost of automotive service fees.So thank you for your informative information and especially for taking the time to video the actual transmission service and repair.God Bless you my friend.
Glad to help
Bro, you don't know how much time i spent to find a video with the same problem as me! Every mechanic had a different opinion on the noise but i always knew it was the transmission! Thank you!
You're welcome
Thanks and appreciated for the video. I suppose to replace the transmission before watching the video. I followed the instructions and cleaned the filters. Finally the transmission went back to normal. Like a miracle! It saves me a lot of money and time.
Great to hear!
Great job explaining the issue, why it is happening and the solution. Excellent video quality as well. Keep up the good work! My daughter just bought a 2009 Versa and I drove it today for the first time and there is a slight whine from the engine area that coincided with the speed. My first guess was transmission issue so I will dig a little deeper. Fingers crossed! Cheers!
Thank you very much!
What was the issue??
Nice to see another canadian mechanic. I didnt know there was a 2nd cartridge paper filter inside and i didnt know red motomaster cvt fluid was ns2 compatible i always get the green oem ns2 from the dealer. Good to know
Glad to help
God blessed you !! you fixed my car
Glad I could help
Glad that you fixed the car. If it is taken to the dealership, they would say that the transmission is shot, replace to whole transmission.
i totally agree with u brother if u bring it to dealership its gonna be transmission replacement they had to time for cleaning of car parts
I'am vary happy of this work
thnank you
good job young Man!
Very good videos thanks mate
thank you too mate my australian brother
good job thanks for the information and video
Thanks for watching!
Awesome bro..Thanks for sharing
My pleasure
You are Awesome!!
Good job thank you so much for good video
Most welcome 😊
very good video man
Glad you liked it
Very informative video
Glad you liked it
Very very informative video
Glad you liked it
after cleaning my transmission and change the fluid and filter, and my transmission will not shift please help Nissan Altima 2007 3.5 engine
Hola, he visto su video y me gustó muchísimo. Tengo un Nissan Versa 2009 y ya le cambie el sensor de velocidad pero aún se siente pesado cuando va entre 30 40 y 50 millas a (4000RPM). Que debo hacer?
How far up the dip stick should the fluid be on a Cvt transmission it’s hard to see in the video? I have a p0868 code only.
I filled it to the second notch it looks like you fill it above the notch by 2 inches is that correct? I’m not sure if I have the correct dipstick mine reads hot right after the second notch
Thank you the video is very informative
Awesome video! Thank you preng Rhaswin!!!. Salamat po.
Also, What is the torque setting to tighten those bolts?
70 in lbs or around 22 fl lbs or if you are experience mechanic just snug it hand tight like ur drain plug
Well done
Thank you so much !!!!!
ur welcome
seria exelente que pongas subtitulado en español para los latinos recien mande hacer este procedimiento en un taller me cobraron mucha plata no pude conseguir los filtros pero los lavaron bien gran ayuda con este video
Perfect super video, thank you so much. I've seen so much videos about CVT problems but your is absolutely the best one. I've a similar problem with my Murano 2006, I've changed CVT fluid (was very dirty as well) with great reflush, but no filters cleaned.Code P0746 is appering when is operate temperature arised car don't want to drive, I must stay one hour to cold up, restart and I can continue next several kms... Do you think should be the same problem with dirty filters?
Nissan service wants to replace tranny for approx 6000 Eur...horrible to think it
Thank you so much for your super advices.
Have a nice day 8)ose.
Replace the valve body it’s the solenoid”A” stuck off I have same problem in my 2010 maxima I Just ordered the valve body few days ago once you replace that your car should be fine I was told I need a new transmission but I’ll definitely spend 150 on valve body and $30 on gasket and new transmission filter and $100 on fluid before I go and spend $3500-4000 on a transmission
We've got the same problem error code P0746 already replaced transmission oils, had it cleaned and still when It operate at high temp it doesnt drive and we have to wait several minutes to cool ito down to drive it again. Mechanic told me to replace the valve body
@@stephenchampagne5763after replacing the whole valve body was your vehicle fine afterwards? With no more p0746 I am
Going through the same problem currently and I’m not sure wether to take it to a mechanic or do these steps myself
Excellent video !!!!! Thx my 2009 was looked at by my Nissan dealership…and they to replace..getting a 2nd opinion
Glad it helped
I have a P0868 code on my 2014 Dodge Journey SXT 3.6. I have park, reverse, neutral, but only 2nd gear when in drive (limp mode). When in manual shift, it only shows “D”, does not show the actual gear your in and won’t manually shift. On the dash information panel, the transmission temperature is not displaying any temperature and the thermometer 🌡 gauge is at the very top on a (cold start). I also have a P1745 code. The journey has 307,000km on it and has been properly maintained. This problem just came out of nowhere. I took it to the garage today to get it scanned and I had the engine oil and filter changed (was due). Diagnosis after codes was to take it to the dealer for transmission. I also found out today that the oil filter/cooling housing is leaking (common problem), so now I have to get that fixed. Also, I just want to mention that I’ve had the transmission fluid exchanged at the quickly lube. But, I did not do the pan and filter (big mistake I’ve heard).
So, I’m leaning towards a clogged filter throwing the P0868 and the P1745 is an issue with the pressure sensor caused by the clogged filter as well. I drive it very lightly. So I’m hoping it’s just needs a flush,pan and filter service. It’s got 307,000km on the filter so ya it needs to be changed. No leaks on the transmission, that was checked today by regular garage. She’s has great torque and take off but only the one (2nd) gear. She will park, go into neutral, reverse, but can only go 50-60km/hr (limp mode).
well try this cleaning repair video that i did it might help ur transmission back to life
Bonjour
J'ai même problème avec ma fiat freemont. J'ai essayé tous ce qui était décrit sur ce vedio mais le problème est toujours là avec un code P0868.
Great video, i have 2008 versa as well with p0868 & p0725 dtc. Hopefully this solves the problem. Where are you located in Vancouver? Thanks
Did you fix the problem?
2013 Altima drives fine unless on a long drive then on a stop to take off will lag to pick up speed. Getting p0776 otherwise drives great what do you suggest?
Thank you for the video! It helped more than any other video on here. My question to you is my 2014 is slow to shift into overdrive. I have to let off the gas before it will shift into overdrive. Is is possible that my 2 filters are dirty? I changed the fluid with cvt fluid and it made no difference. My old fluid was black just like your old fluid was. Mine does not have any codes and does not make any strange sounds... Please help me ...
Try to clean the 2 filters too it will help a lot i distribution of cvt fluid on ur transmission
Did the new filters help I have the same issue
@@cranemann25 On mine it did not work but it might on others
For my 2009 nissan versa i had P1778 for stepper motor so i got that replaced and everything cleaned out. 2 weeks later same issue. I pulled codes from transmission yesterday and it gave P1778 and P0868. The only symptom i experience is delay gas pedal response 3-5 seconds. No noises and no smell. You think valve body can fix the issue or transmission replacement needed?
good job
thank you bro kumusta na
The problem I have with my 1.8 Tiida is that the PenriteNS2 fluid is yellow, and almost impossible to see on the dipstick, (which is a swine to remove if the clip is engaged - I now fit it the other way around.)
Our 1.5 has red fluid, and it's so much easier to read.
My neighbour paid over $5000 for a replacement transmission in his wingrod, which is mechanically identical to the Tiida/Versa, and it was just making horrible noises.
I'd say that a $400 filter and fluid change would have fixed it.
Love your work.
What do you know about the Honda Jazz CVT?
Thanks for the detailed video, i have a small tiny fragments on the dip stick, just found them yesterday. However the trany works ok, did not notice any lag or missing a gear. Shall i change the oil and vlean the filters? Or leave it since its wotking? PS: the oil is still looking ok
Try to open ur tranny pan that way u can check and decide for ur cvt transmission
@@asianmechanicguy6483 well definately do. I will do the cleaning anyway, and if it did stop working, then i shall buy a new car
@@alisrour5563 did you end up dropping the pan? And did you find more shavings?
Hello, this is a great video, I have the same codes as in this video but my 2013 infinity jx 35 cvt won't engage drive or reverse, nothing completely dead.
Can you tell me what you think? thank you so much
ur transmission is dead done u need to replace it
Great job! Very well explained. Where are you located?
vancouver canada
Wow. You really like to fix cars without a shop. My 2008 versa stored for 2 years now only goes into drive and will not shift to any other gear including park. What do you suggest? Thanks. Salamat🙏
Hello from the uk. What torque settings did you use and what pattern? I'm about to do rhis on my 07 nissan cube 🤞🏻
mostly i do it snug cuz manual says around 9ft lbs which is too loose and bolt pattern in putting it back is start from inside to outside
Was the shift solenoid in the pan ever a possibility for you too?
I have dark transmission fluid in a rav 4
I ordered solenoid
Should i just do an oil change
if u had enough budget then go for it but if ur tight on budget just try this method it will only cost u less than $100
excellent sir ...is it necesary to change the oil because ill keep the oil in a good tub and the oil look like good but if i have to change it do you think the train is very empty and ok to put brand new oil and how is the capacity... sorry about my language im a french. and how many mille do you thunk the problm is come back right now the car have 120000km
put a new ns2 6 quarts tranny fluid every 30000km
@@asianmechanicguy6483 finally i change the oil brand New because i have trouble to accelratr and i have the code p1778 what do you thing is the problem
22 bolts on my 1.8 Tiida pan, with a manual ratchet.
I was over it by bolt 3.
there's a little cylindrical filter at the top, but, apparently, nobody ever replaces it, so it's almost impossible to buy.
I think it's for the breather.
Lakay or Manong, Thanks for the videos. I have a question, hope you can answer. My 2007 Versa when put on drive won’t move. Is it solenoid or a flush can work? What should I do? I have to put on1 then gas a little then go on Drive to move.
bring it to a mechanic
I have the same issue on a 2013 model. It only happens when it's cold. Did you find a solution to this?
Hi Boss my wife has 2008 Nissan tiida same as versa 5door hatchback but it's a right hand drive in New Zealand does the same method apply and does the ns2 cvt fluid have to be red or should be red? Thank you i really enjoyed watching your video as I will be attempting this on her car
This applies to 07-09 Nissan versa or tilda SL cvt transmission ..And yup ns2 should be red and most transmission oil are red ns2 or regular tranny fluid
@@asianmechanicguy6483 you are the top Man👌. I will come back here to let you know how it went as it still has a few more ks to go before I change fluid 🙂
Hi, Boss my partners tiida is now due soon in a couple of weeks for transmission drain refill ect.... My only concern is the transmission pan bolts torque setting do you know what they are please as I don't want to over tighten or under tight them and if there is anything else I should be aware of as I will be doing it exactly how you are doing it cheers 👌
@@tio123ist 22ft lbs start inner to outer when tightening
What should i do for my car Xtrail T31 CVT. When i drive long journeys about 200 km, the car will not change gear going into limp mode at 40 mph with a whinning noise, i diagnosed it and gave P01740 code something to do with torque converter clutch solenoid ? But if i stopped switching off the car for 1 hour and start again the car will go very well and no limp mode. It looks like this switch get too hot, what should i do?
bring it a transmission shop most likely ur having a transmission problem too bad
Does the flat filter have a part number?
1.Please how many litres of oil filled the transmission of the gear of versa.
2.What is brain vibe in the gear box of Versa and how can it be resolved.
Thanks
I just change the cvt oil in my mum tiida and the oil was dirty but there was little metal bits in the sump. There are on issues or noises from the cvt before or after i change the oil. But i on its not a good thing.
If it has little metal on the sump u got a worn part somewhere in ur transmission dont bother to change the fluid anymore rebuild ur transmission or replace it
Greetings,
My 2012 Nissan Altima 2.5SL is at a transmission shop. Had 6 codes. They replaced the transmission valve body. Now the only code that remains is P0868. Been 3wks and they can't clear code. Can you suggest what else could cause this code? Do you think the transmission need to be replaced/rebuilt?
u need to rebiult or replace ur tranny cuz ur sensor teeling the ecm that theres no enough fluid going trough to the tranny ..and base on my experience ur variator is done ( bearing broken or seal ring worn)
There is 2 pressure flow valves in the pump.. that is where your problem is
Hi, i wanted to ask the nissan micra k13 model 2012 in cvt transmission if there is a fuid filter? Last change fluid mechanic only clean stainer
if he open the transmission pan for sure he clean the tranny filter too ..most of nissan tranny filter is a fine strainer and its reusable
@@asianmechanicguy6483 thank you so much for your respond but im watching all time only strainer he clean..
Hey, mine had some metal shavings in the pan, should I just replace the transmission?
the damage has been done replace the transmission
So mine only goes in reverse and not foward , machanic said it was transmisión but it was replaced snd does the same
Hello, I have a 2010 Nissan Cube with CVT. It has P0746 and P0868 code, it drives good when car was cold. Will have rev surge on highway, when i stop, gas paddle not working. Does my transmission still can fix? If yes I'd like to find you, im in Vancouver too.
Base on my experience with this if the car still drivable and u cant hear grinding sound coming from the transmission thereis a big chance its still fixable by just doing this methos how ever no guarantee i did made this video just to show u guys that this can be fix by just ceaning ur tranny filter and replacing the fluid and u will spent a portion of a 3kplus worth of replacement transmission ..u can only spent around $350 cad compare to 3k replacement/rebuild transmission and if u wanna reach me this is my business number 7783235613 thanks
@@asianmechanicguy6483 Thanks for your time buddy, yes i did change CVTF and new both filter but still fucked. thinking about CVT swap. Do you think Versa 07-09 RE0F08A can swap on my Cube (RE0F08B)?
Were new gaskets used?
Hello Sir, I had a nissan versa 2009 CVT transmission. I’m facing a problem regarding the whining sound from the transmission. Had it on scanner and it showed P0868 and I took it to Nissan dealer and they made transmission fluid service, but the sound is still the same. In your video the soud is extremely loud while mine only you can notice it if your windows are closed. Please what would you recommend?
try to open transmission pan and clean the filter
Did you ever fixed that code? I have yours and p1178
@@asianmechanicguy6483 I did and the code is gone, but the whining sound still as it is. What do you think ?
@@jonidimeri1578 yes the code is gone but the whining sound still the same:/
@@DrSpray-yk9ru Many says is failure of valve body but not sure
What mileage is this car? Is this the first time you have a transmission problem?
134000km and from what I know this is the first time the car had an transmission issue
Can you help me,nissan tiida 2007,when i put on the the doesnt react,it doesnt move at all,no check engine
get it scan for codes and if u can..follow this video u still might save ur transmission
Hi, I have a 2008 versa that I purchased used in may 2018. I got my engine replaced in 2020. haven't done anything yet to check the transmission health....I didn't drive the car much for 10 months last year. My cat rolls back on steeper hills. Please advise....
How can I help you?
Yeah people with cats like versus versus the biggest and the new center of the biggest garbage you can get pretty much
Hello there sir..I have a nissan altima. that won't go pass 10 miles per hour.. What they call here limp mode.. Do you think it might be the same problem..??
not sure brother but u can try it it only cost u few dollars
@@asianmechanicguy6483 Thanks
I bought the car from Anthony and it had a p0868 and p0746 and metal shavings in the pan. Cleaned the filters and flushed all new fluid and added an in-line filter. Am I wasting my time and money and have to replace the trany of mybe just the sol A. Help please. Im thinking a lost cause at this point. Thanks
Yup its better to rebuild ur transmission or get a new one
Ever figured out what the problem was ?
@@MrJOHNY347 The transmission was shot. Got rid of it. not worth spending 5k on a transmission.
Same code p0746, my car drives and runs but doesn't shift to next gear..what do you think?
try this procedure
How many miles on the versa?
Is the process different for same year but automatic transmission (non-cvt)?
non cvt has different transmission component but they are pretty much thesame in cleaning the filter
@@asianmechanicguy6483 i have a problem with my versa that it takes a few seconds to shift into drive. Mostly when cold start. I was told to try to clean what you did but also the solenoid. I was trying to see how to get to the solenoid. Any advice?
Any advice my friend?
@@babarentals2941 cleaning the filter will a lot especially if ur transmission never service just follow my procedure
I have a 2007 nissan versa and I try to keep the maintenance up myself . I’m no mechanic, but recently I’ve been hearing a buzzing sound; almost like a gurgling sound when I accelerate and gets louder as it speeds up.
Really don’t have the money to get ripped off by taking it in.
Can someone please help
you've been help already this is the help u need this video just follow it
2009 Altima codes 868 725 and 826 help please
Good job.. but you need to replace the small filter rather than cleaning it
no available parts in my area
is this a cvt or 4 speed automatic transmission?
cvt
What is that part that you removed from transmission called?
its a transmission filter u can reuse it cuz its a metal
Not the filter I’m talking about the other part you took off from the transmission
still transmission filter assembly just go to ur dealership just tell them the tranny filter assembly or the paper one they know right away
My 2011 Nissan Altima 2.5S just recently turned 80K miles. Then a week later went into limp mode and will not speed up. I had codes pulled. Please help.
Codes
P0500
P0101
P0720
P0746
bring it to a transmission shop
@@asianmechanicguy6483 Yeah, might need to.
I have the same code and my oil is ok. The transmission is less than two years old.
try this approach
What size allen was that?
forgot what size it is but check out my other versa videos i think i put it on the description all the tools sizes that i use
CVTs are SO simple.
The only reason they go wrong is lack of maintenance, or incorrect fluid.
Same as the Nissan Cube?
no idea and theres only few nissan cube that ive seen here in my area
Ok
J'ai aim beaucoup ce travail
Where can i find u brother?? I need your help please....
Vancouver
A cheap ultrasonic cleaner will do a mighty job of cleaning the trans filter screen.
Where is ur location please...
I have these codes on my Maxima
try thid approach by just cleaning ur transmission filter and putting fresh tranny fluid
Did you find the solution ?
@@MrJOHNY347 Yes there was a leak in the transmission pan. I got a new pan, gasket, and transmission Fluid the problem was solved.
@@tankwhite.7036 yeah currently I have a p0746 p0868 .i took the valve body ,magnets and filter out and cleaned it ,replaced it with new fluid .No leaks .Took a road trip across 3 states back to back and the car was smooth with great power . Month later same check engine light came on .car lost power .Turns out when the fluid is hot ,it’s not on the dip stick level on “hot”.Add another quart maybe tomorrow and hopefully that solves the problem .
@@MrJOHNY347 lost of power or shaking usually means more fluid needed. Look for the exact amount needed for best results.Good luck!
couldn't it actually be the solenoid A causing the problem also?
mostly its just a clogged filter
Is this common in Murano also?
not sure about murano
@@asianmechanicguy6483 thanks , I'm having trouble with my murano. It is good until it gets uo to operating temp then it goes into lemp mode. I have 2 codes p1778 and p0746.
I installed a new step motor, it didn't help. It has 193,000 miles.
The fluid looks very dirty and smells burnt.
Anthony Henry I have the p0746 code and though it was my air intake hose since it had a crack in it but it didn’t help and now I’m debating changing my whole valve body ahahah but if your fluid is burnt you should try changing it since it should smell sweet
@@kaboom1774 I think my problem may be the fluid control valve. I have watched alot of videos on the transmission. Seems they can get worn and stick. So as it heats up and expands then it would be more prone to stick. Only way to know is pull the transmission and take it apart.
That is not ns2 fluid it should be green in color
genuine ns2 from dealership is green in color ..aftermarket like motomaster cvt ns2 fluid generic its red and its replacement fluid i hope i clear up ur doubtfulness
غلط انتبهواكلوا غلط
Is two different transmissions in Nissan one is just the regular transmission and another one is cvt transmission, I think you’re using the wrong fluid you better watch out
dont worry brother this is the right fluid its a cvt transmission and ive done almost 20 cvt transmission for this specific car and by the way im a nissan dealership mechanic
Thanks
clean the oil pan with water is ok and i assume also the screen filter but not the paper cylinder filter right? this paper filter can't be cleaned with water right?
yes u can but i prefer brakecleaner not water
Well done
thank u