Super Duty E Locker Swap! (Sterling 10.5 / 10.25)
Вставка
- Опубліковано 9 тра 2024
- Today we take out the garbage limited slip differential that came with the one ton axles I installed in my 2010 Toyota Tacoma, and swap it for a factory Ford E Locker from a 2011+ F350.
These E Lockers can be found cheap at junkyards or in my case Facebook marketplace and will work in any Sterling 10.5 or 10.25 axle.
Snail Armor Panel: snailarmor.com/dirtgarage
Support Dirt Garage by purchasing our Merch! - www.dirtgarage.ca
Brought to you by @ Alpine Toyota - alpinetoyota.com
10% OFF YES WELDERS: yeswelder.com/?ref=z9n5g70h
10% OFF YANKUM ROPES: yankum.com/?afmc=DirtGarage
INSTAGRAM - / dirt_garage
Music Licensed @ Artlist
Find music for your videos on Artlist! artlist.io/Clinton-279876
Business contact: Dirt.Garage@outlook.com - Авто та транспорт
Never mind the locker, loving the hair!🤟🏼
Yeah Joe Dirt, Canadian style!
The thick cut gears are made to run on a 3 series carrier so you don't have to replace the carrier when going to lower ratio that would normally use 4 series with a normal gear set.
That's what I was thinking, a thicker ring instead of having high/low ratio carriers.
I have a 2016 F-250 with the E-Locker, works great.
Nice upgrade!
Nice shaft.... a little twist for funzies 😮
Can tell this was a research project, before diving in
Thats sick, i love cheap performance parts lol.
Although it looks like an antiwrap bar would be helpful. Looks like you were getting decent axle wrap.
There is a anti wrap there 🤣 But what you can't see is it ripped off the factory crossmember.. Gotta build a solid crossmember for it
@@DirtGarage all those toyota horsetorx twisting shafts and ripping brackets 😆
About to do the same. What gauge wire and thread size for the cable gland did you use?
I wonder if the solder, heatshrink, connector, seal, wire coating is temperature rated to the gear oil temps
I see in the thumbnail solder was external to diff
How did the pattern turn out ?
Pattern was perfect still. Drives better than it did before, being completely open on the street is nice.
Your "new" used locker looks like the previous owner didn't install the pinion correctly and it self clearanced on the carrier. You might want to keep an eye on that
Yeah it had a crush sleeve failure I was told. I'm well aware of that 🤣
👊👍
Ford.....😂
Look up Dodge in the dictionary an tell me what it said.... Lol, Ford in a Yota 😂
Why are you using red rtv?!?!
Because it's what I had! It will be fine 🤣 Just not as pretty as black.