BMW SPEEDO Pixel fix in 2 minutes - UNCUT - e39 e38 x5 repair instructions - silver ribbon cable
Вставка
- Опубліковано 28 лис 2013
- BMW Pixel repair on dashboard instrument cluster / speedometer
www.diyspareparts.net/bmw.html
OBC LCD display repair in 5 minutes - e39 e38 x5 speedo fix instructions manual with silver ribbon / flat cable - Авто та транспорт
I love those types of displays. Wish newer cars would have these.
the KIT comes with full fitting instructions - a printed 10 pages long manual plus a very detailed video (much more detailed than this one) that shows every single detail, including disassembly, needle removal, and so on.
Eedomer
Where do I get the kit I habe a 02 530i
I'm also in us how much
Hey man, I need to get one fix and would rather pay you to do it. It is untested, I do not have the equipment like you do. I also have Jag's Hyundai, Toyota and GM for you to inspect or repair. Can you do it? You still around?
Removes dash cluster from car.
Disassembles dash cluster ready for repair.
"Watch me fix this in 2 minutes!"
I can do a head gasket in 2 minutes by this method.
I bet you couldn't.
@ you get the point.
if only youtube have FB's "haha" reaction....
Beautiful job.
great work very smart
How long did it take you to get it separated from the dash? Also, would you by chance have that video recorded?
Awesome. Thanks for that.
Good afternoon, Tell me where to apply tension to enable tests on the removed panel.
Where did you get your parts to do this repair? Thank you.
Which cables in the rear do you need to connect to 12v to turn it on outside the car?
So.... it looks like you do not need to heat up the ribbon cable to get the glue to set before attaching the backlight part?
Can you show any or All steps taken to get this apart? This part is very difficult and may not be possible by most DIY folks
Like
1 Remove T9 screws
2 Twist align plastic cross tabs on back to free cover
3 Pry four points to remove cover
4 Needle Removal with side cutters
5 DE solder the 6 back light solder point connectors 3 on each end of the back light housing and remove display back light housing.
6 pull and clean gold contact points that ribbon attaches to and clean contact points on LCD.
7 run to the liquor store and purchase the best Vodka and celebrate achievement of the separation process.
This video gives you an idea how the repair works. The KIT you receive for the repair comes with a very detailed, much longer video that cover the repair from the very beginning, till the very end.
show us how you removed the needles
What exactly is that piece called, I live in the us and need one for my 95 740il
super!
you have the 223-002_S and the 254-003 what one is correct for X5?
Thanks
Looks easy... Apart from removing all the dashboard to do 2 min job on the x5 3d sport 2003
i am interested to get the kit. how do i order it? how much does it cost and how to order it.
thank you
Awesome
Dear Eedomer, tell me please if it is (254-001) original part number or duplicate? If not, tell me if it is possible to find real original ribbon cable from Siemens or VDO, or Blaupunkt?
Yeah but how long did it takes to dismantle the cluster,
How to you connect tacho without car? I have E34 tacho to fix...
What do you call that kit? Where can i buy it? Thanks !
I don't know if you are still answering comments. What about E46 models?
How do you plug it in and test away from the car?
Does this also work for VW GOLF 5 Display repair?
Let me know if I missed anything.
@Eedomer I have this problem with my e38 under the radio where it shows your petrol consumption and radio channels etc,is it possible to get the silver cable thing for that area
We do have that cable too, here comes the link:
www.pixelfix.net/eng/bmw.html
You need #254-001
Balazs
Se ve muy fácil!!... Enserio lo es???... Tengo ese problema de pixeles en mi bmw e39 528i.
Hi, i would like to order à repair set to my E38 96' . How to order? Can you help me. Pls? Thx
Suddenly all the parts fixed back , but where to buy
My Temperature is very dim compared to the rest of the stuff. Can that be fixed?
ship to usa?
How can you get the temperature gauge on the far right of cluster to reset? I put another cluster in and all gauges work except for that one going straight to HOT.
Usually I see this when the thermostat has failed. You can get it to return to normal by clearing the codes. And then when it happens again fix the issue by replacing the failed part.
If I buy the ribbon will it come with instructions? Or is there a "Kit" Thanks.
Hi! You can buy the needle removal tools separately on the same page you find the cable or the display: www.pixelfix.net/eng/bmw.html
Just need to remove thats all?
97-98 E39 Clusters are different from 99-03. Does this "fix" repair both of them?
Yes it does. This cable fits both the older and newer models.
where can i get the silver cable need one ....
here it coes:
www.diyspareparts.net/bmw.html
Has anyone done this? Is this real?
where to buy repair kit?
Here you can find it: www.pixelfix.net/eng/bmw.html
magyar vagy? :))
Igen :)
2 minutes to repair, and 30 mins to get the thing apart
ba b ba bl a aa bal ? WTF?
Speak clear geak.
"It looks perfect" It's showing -40c degrees.
-40 is the default output when the outside temp sensor is not connected. Same goes when it fails
he can only repaired in 2 min while the temperature @-40C... it may take much longer if temp is higher than +25C..LOLOLOL