I trust that you enjoy the video and if you would like to support the channel on an ongoing basis then please do consider joining the channel as a Member: ua-cam.com/channels/SKmO9BJWGYQbGZ6655wpqQ.htmljoin Cheers Drew
Thanks, I really needed this for my. 2010 ML350 V6 4Matic. I have ESP inoperative indicator light that tends to come on time to time. Planning on getting the Icarsoft MB.V3
Hi Mate, glad it helped! I think the MB V3 will be a super nice tool.. My CR PRO has equivalent of MB V2. I would really like to try out the MB V3, but can't justify the money at this stage for me!! Cheers Drew
@@charlievega7597 Hi Charlie, there were no actual traditional “symptoms”, the car simply through up these errors on the dashboard which alerted me to the underlying issue. Cheers Drew
Hello my friend my cls c219 2010 had the same issue from time to time specially when i pressed the acceleration pedal suddenly for boost and the electrician guy check it and said its faulty pedal I replaced the pedal and the issue the same now😢
My esp switch is not working. I can’t turn my esp off. I changed abs module and traction module and esp switch. I know traction is working beixase I tried to slide the car, traction kicked in. I’m unable to turn it off from the switch. Any idea ? I have 2001 clk 320 w208
Yes mate, iCarsoft release updates to the software for the newer models over time. Note, if you have a vehicle of an age that does not have a OBD2 port, such as your 1960 Mercedes, then it won't be supported. Cheers Drew
Just wondering My ESP light is just on constantly and I used a code reader the told me the codes for my engine that already knew not for the ESP so do u think the code reader u have will work ?
Hello Master, I hope you're doing well. Actually, I have a problem in my 2006 Mercedes ML350 car, in the parking lot it seems to accelerate normally but once on the road while driving, there is a yellow triangle shaped light that flashes after it there is a loss of power, the car refuses to accelerate and there are codes 1186 (p2004), 5130 (L6/4 speed sensor), 5110 (L6/2 speed sensor), and 7266 speedtronic sometimes not functional. but with the code p2004 the car worked normally no triangle light. but now as soon as the light flashes I can no longer move forward! Could the ABS be responsible for this problem? Thank you for your help please
Hi Mate, it seems to me that looking at your codes I think that you have multiple issues happening at once. Had the p2004 been around for a while? To be honest I would work through each of the issues separately. Given that you imply that the p2004 was there before with no issues before the yellow triangle then I would start with the speed sensors. But you do need to address the p2004, which appears to be a manifold related issue. Cheers Drew
@@DrewFixIt THANKS. I think I need to fix the ABS problem first to see the result. But is it also possible that the problem linked to the ABS could cause such a reaction?
@@rublinmafuku9161hey did you get this fixed? I have the same thing happening with my c300 I just want to fix the issue when I accelerate and lose power when I press the gas all the way down, if I don’t press the gas all the way down the car drives fine
So I finally found a icar soft MB V1.0, arrived yesterday. I have both esp and ans warning lights on the dash. they come and go, so I sometimes have cruis control, sometimes not. LOL Ran a diagnostic (with lights on) but faults came empty. A wee bit lost here ! Will try an update on the scanner tool. cheers !!
Bonjour 2006 modèle w251 classe r esp lumière est constamment allumé. C'est comme ça que je l'ai compris. véhicule 150 km. il ne dépasse pas la vitesse, pourrait-il provenir de l'esp
@@halalli5480 Hi Hal, I have not personally used a MB v3, however I genuinely find this hard to believe that the v3 would not diagnose the ESP system. I suggest that you get in contact with iCarsoft as i think your unit maybe faulty. Cheers Drew
I trust that you enjoy the video and if you would like to support the channel on an ongoing basis then please do consider joining the channel as a Member: ua-cam.com/channels/SKmO9BJWGYQbGZ6655wpqQ.htmljoin Cheers Drew
Great video! Cleaning the sensor parts instead of replacing.
Thanks, I really needed this for my. 2010 ML350 V6 4Matic. I have ESP inoperative indicator light that tends to come on time to time. Planning on getting the Icarsoft MB.V3
Hi Mate, glad it helped! I think the MB V3 will be a super nice tool.. My CR PRO has equivalent of MB V2. I would really like to try out the MB V3, but can't justify the money at this stage for me!! Cheers Drew
@@DrewFixIt My v3 does not do the esp says it is not available you might check it
@@DrewFixIt what was symptoms?
@@charlievega7597 Hi Charlie, there were no actual traditional “symptoms”, the car simply through up these errors on the dashboard which alerted me to the underlying issue. Cheers Drew
@@DrewFixIt when u inserted the key in ignition would it let you turn on the car?
Hello my friend my cls c219 2010 had the same issue from time to time specially when i pressed the acceleration pedal suddenly for boost and the electrician guy check it and said its faulty pedal
I replaced the pedal and the issue the same now😢
How do you identify which wheel?
Great video , Whats the name of the sensor?
My esp switch is not working. I can’t turn my esp off. I changed abs module and traction module and esp switch. I know traction is working beixase I tried to slide the car, traction kicked in. I’m unable to turn it off from the switch. Any idea ? I have 2001 clk 320 w208
Does icarsoft tool work on all Mercedes?
Yes mate, iCarsoft release updates to the software for the newer models over time. Note, if you have a vehicle of an age that does not have a OBD2 port, such as your 1960 Mercedes, then it won't be supported. Cheers Drew
Flowmeter or mass sensor, then this is not the problem? Thanks a lot
Hi Mate , I’m not 100% sure but I would some sort of flow meter. Cheers Drew
Very Good,and thank you.
Yeah I have our clans are 400 I changed the whole intake and still idles rough
Just wondering My ESP light is just on constantly and I used a code reader the told me the codes for my engine that already knew not for the ESP so do u think the code reader u have will work ?
Hi ..do you know if it works in a CLS diesel from 2007 cause i have same problem😊
Hi Mate, I think it would be similar! Cheers Drew
Hello Master,
I hope you're doing well. Actually, I have a problem in my 2006 Mercedes ML350 car, in the parking lot it seems to accelerate normally but once on the road while driving, there is a yellow triangle shaped light that flashes after it there is a loss of power, the car refuses to accelerate and there are codes 1186 (p2004), 5130 (L6/4 speed sensor), 5110 (L6/2 speed sensor), and 7266 speedtronic sometimes not functional. but with the code p2004 the car worked normally no triangle light. but now as soon as the light flashes I can no longer move forward! Could the ABS be responsible for this problem? Thank you for your help please
Hi Mate, it seems to me that looking at your codes I think that you have multiple issues happening at once. Had the p2004 been around for a while? To be honest I would work through each of the issues separately. Given that you imply that the p2004 was there before with no issues before the yellow triangle then I would start with the speed sensors. But you do need to address the p2004, which appears to be a manifold related issue. Cheers Drew
@@DrewFixIt THANKS. I think I need to fix the ABS problem first to see the result. But is it also possible that the problem linked to the ABS could cause such a reaction?
@@rublinmafuku9161hey did you get this fixed? I have the same thing happening with my c300 I just want to fix the issue when I accelerate and lose power when I press the gas all the way down, if I don’t press the gas all the way down the car drives fine
Excellent video. Please keep making them.
Thanks mate, will do!! Please like, subscribe and share to help the channel grow 🤣🤣🤣 Cheers Drew
great stuff as usual Drew !!! do you think the icar soft would also work on my vito w447 ? cheers !
Hi Sean, yes it works with the Mercedes Vito. Cheers Drew
So I finally found a icar soft MB V1.0, arrived yesterday. I have both esp and ans warning lights on the dash. they come and go, so I sometimes have cruis control, sometimes not. LOL Ran a diagnostic (with lights on) but faults came empty. A wee bit lost here ! Will try an update on the scanner tool. cheers !!
Hola a solucionado el problema ? Cual es el modelo de scan que funciona en Vito w447 mi vehículo es 111cdi.
Saludos
I have a 08 cl550 and I had this problem
Bonjour
2006 modèle w251 classe r esp lumière est constamment allumé. C'est comme ça que je l'ai compris.
véhicule 150 km. il ne dépasse pas la vitesse, pourrait-il provenir de l'esp
Great Video Drew thanks, I have a 2006 CLK 500 (A209) with an "ESP malfunction" message, do you think the icarsoft can scan my 2006 Mercedes?
Hi Mate, yes I believe this scanner will scan your Mercedes! Cheers Drew
My Ml 350 2007 the v3 does not
@@halalli5480 Hi Hal, I have not personally used a MB v3, however I genuinely find this hard to believe that the v3 would not diagnose the ESP system. I suggest that you get in contact with iCarsoft as i think your unit maybe faulty. Cheers Drew
Tanks you very very much
I have a 03 Mercedes Benz C230 Kompressor
Hi Isaac, any of the code readers in my storefront will work for you: www.DrewFixIt.com Cheers Drew
Thank you