DIY: Jetta MK4 TDI Injection Pump Removal
Вставка
- Опубліковано 11 чер 2020
- 2002 VW Jetta TDI Auto Trans
** Please Note **
I am not a professional mechanic. The videos I make are to give there DIYer an idea on how to complete a job or what to expect when when doing a job.
In no way is the work I performed the only way and the most right way. - Навчання та стиль
He didn't have to loosen cam sprocket, just paint mark the belt to the sprocket at the crank, cam, and pump. Heck, you dont' even need to be at TDC for that matter. as far as pump sprocket alignment during reassembly, take a picture with the alignment pin in place and put it right back in position.
Real helpful, informative video, thank u very much:)
thanks sir that really helped
Thank you buddy
I read if you take pulley off pump that a shop must recalibrate it because its set at factory and no pulley key???
Only if you remove the hub. Don’t remove the hub!
You should not have loosened the cam pully gear , instead remove the belt tensioner to give you enough slack in the cambelt to work with ease .
How did the sprocket on the end of the camshaft come off? The 22 mm just spins the injection pump and nothing happens
It possible to cause issue with acc pedal this pump ?? Bcz i have problem with mine it says implaussible signal pozition acc sensor
I did that but it seems it's still got a bolt in it still it's hard to move
Why loosen the cam pulley?
This is not the way to do this will lead to engine damage the valve in this engine can be damaged with the lightest impact will lead to valve head breaking off later
How so? These alh engines can take abuse and not once there an "impact" anywhere near the valve train. Taking the valve cover off to see the position of the crankshaft doesnt hurt anything. If anything, not taking the valve cover off could lead to possibly having the timing be off at most.
This is a very hacky way of doing it, but it works. If you have the tools to lock the cam in place, I would 100% recommend using it. If you don't have the tools, you can try to do it this way.
@@nathanmartin5529 camshaft👍