@@BombsAwayMineCraft Yeah I put the washers in and it basically shaved the trigger sear, and started shooting on its own when ever id cock it. I had to send it back to get it fixed, so I wouldn't recommend. Plus I didn't get any more speed maybe like 10fps but I don't even think it was that much. Stock it gets over 320fpe with a 150 grain bullet. That's plenty good I think. Hope this helps you. Let me know what happens or what you plain to do.
Dear Mr Bin. When will the world see a regulated semi auto, with a vertical stick mag of 25x .45cal that has 2500cc of air @5000psi ,something that can do 700-1200 fps? And is a great price?
Hey Will those washers also work on the 50 cal air rifle because the one I ordered supposed to been at 4500 PSI and I did not get the gun I ordered I got a gun you guys sent out at 3600psi with the weak spring in it but I am not happy about this one bit I ordered this through Terry he advertise the air rifle is being a 4500 PSI he said it had a 32-inch barrel I am very disappointed in this I did not get what I paid for
I have a 3 questions First question is do you have washers for the 30 cal bullpup hevi hammer to increase the power also do they make a conversion kit to change the bolt lever into a side lever on the 30 caliber Also is do you have washers for the the 25 Cal varmint or a heavier hammer spring
@@gmsantafeairgunner2169 I have an assine 25 cal with varmint barrel kit. If you unscrew the stock and remove the hammer spring, take it to your local ACE hardware store. I did and for less than 20 bucks I left with about 2 dozen springs the same diameter. By cutting those hardware store springs and mixing and matching I'm able to send a 25 cal 49 grain "projectile" through the thick metal of a 55 gallon barrel. Hey Bin, what I gotta do to get those 30 cal HP mag springs in the mail??
@@jeffreystroman2811 I love the aea products the only thing I don't like cuz you can't get upgrades and a lot of the vendors don't have parts like a upgraded hammer spring you have to do it on your own I guess I don't see no danger any harm in putting a little heavier hammer spring to increase power foot-pounds and speed thank you my friend I will do that
@@gmsantafeairgunner2169 try first finding a few springs that easily fit inside where the hammer spring goes, then make sure there's no binding on the guide pin. Then, rather than swapping the entire spring cut a 1/2" off a new spring with approximately same rate (spring rate ie tention) and just add it like a spacer behind the stock spring. See where that gets you then go from there. You'll be surprised how little it takes to make huge differences.
This is amazing power for that grain slug. Will be a great deer rifle
Thanks for this video and all the time you spend helping your customers Bin. I was waiting for this.
Nice Vid Pete & Bin! I cant wait to get me 1. I just ordered the Big 9 today. I might have to get some of those washers for mine. 😁👌
Did you ever put washers in it, I just got my big 9 today and would like any info
@@BombsAwayMineCraft Yeah I put the washers in and it basically shaved the trigger sear, and started shooting on its own when ever id cock it. I had to send it back to get it fixed, so I wouldn't recommend. Plus I didn't get any more speed maybe like 10fps but I don't even think it was that much. Stock it gets over 320fpe with a 150 grain bullet. That's plenty good I think. Hope this helps you. Let me know what happens or what you plain to do.
@@dougiefresh3767 if I'm getting that much FPE, I will definitely be leaving it stock
@@BombsAwayMineCraft Yeah I lied. Lol! I was getting 328fpe with a 125 grain NSA not a 150 grain, so you should definitely get that with a 150 grain.
that's plenty power with out the upgrade think I'll leave mine stock and maybe it'll last longer but thanks for the info
Dear Mr Bin. When will the world see a regulated semi auto, with a vertical stick mag of 25x .45cal that has 2500cc of air @5000psi ,something that can do 700-1200 fps? And is a great price?
Are you still selling washers for the 50 cal Challenger..I would like an order...of four washers
What will happen if I put 3 washers in on a max power kit? 457 caliber
Hello sir, I purchased the AEA .50 cal Challenger from Terry at Fox air power .. Can I send you money for this mod for .50 cal???
Awesome!!!!! Will send you a PayPal tmorrow! Can you share with us what brand/type bipod will fit on these guns?
Thanks bin from my Mighty Los Angeles 🔫✌️
Is it worth putting on a challenger pro 35 caliber or can you put these on the 357 .pro
Hallo, What size do the rings have?
Where did you get them? I tried googling it and nothing comes up. Thank you in advance.
Will this effect the total life expectancy of the spring? Is it under constant pressure now?
Hey Will those washers also work on the 50 cal air rifle because the one I ordered supposed to been at 4500 PSI and I did not get the gun I ordered I got a gun you guys sent out at 3600psi with the weak spring in it but I am not happy about this one bit I ordered this through Terry he advertise the air rifle is being a 4500 PSI he said it had a 32-inch barrel I am very disappointed in this I did not get what I paid for
Yep it works on all bog bore
Where can I buy the washers for myself how many mm
報哥 為何AEA challenger Pro 灌氣完會從灌氣嘴漏氣
where do you get these washers
Are there kits for the aea hp ss plus 0.30 cal?
What size are these washers?
Nice job 😄😄
where can i buy that
Try the 355grs please
Of course we will do that later
You don't need to Exhaust the air when you do this, but must decock the gun.
You do not know what people will do. Haha they do all crazy stuff
2121 fps damn!! lol awesome work bin when will these be up on your site ?
That is a funny nunber
Aah sooo their is a secret laboratory !! Hahaha hahaha 😂😂😂😂
I have a 3 questions
First question is do you have washers for the 30 cal bullpup hevi hammer to increase the power also do they make a conversion kit to change the bolt lever into a side lever on the 30 caliber
Also is do you have washers for the the 25 Cal varmint or a heavier hammer spring
My friend this only works for big bore like Big9,45 and 50 not for rest of challengers
Let me know if they come out with any upgrades thank you also you said you would check if you had a 500cc tank for the 30 caliber Challenger bullpup
@@gmsantafeairgunner2169 I have an assine 25 cal with varmint barrel kit. If you unscrew the stock and remove the hammer spring, take it to your local ACE hardware store. I did and for less than 20 bucks I left with about 2 dozen springs the same diameter. By cutting those hardware store springs and mixing and matching I'm able to send a 25 cal 49 grain "projectile" through the thick metal of a 55 gallon barrel. Hey Bin, what I gotta do to get those 30 cal HP mag springs in the mail??
@@jeffreystroman2811 I love the aea products the only thing I don't like cuz you can't get upgrades and a lot of the vendors don't have parts like a upgraded hammer spring you have to do it on your own I guess I don't see no danger any harm in putting a little heavier hammer spring to increase power foot-pounds and speed thank you my friend I will do that
@@gmsantafeairgunner2169 try first finding a few springs that easily fit inside where the hammer spring goes, then make sure there's no binding on the guide pin. Then, rather than swapping the entire spring cut a 1/2" off a new spring with approximately same rate (spring rate ie tention) and just add it like a spacer behind the stock spring. See where that gets you then go from there. You'll be surprised how little it takes to make huge differences.
He bin is this for the 50 cal also ?
Yep my friend
busy but happy
Thank you buddy
报哥想看点中文的视频了
报哥今日头条怎么不更新了
Can you send me some washer for my 50 cal I just bought
Of course
You have my address thank you
These work on terminators
The 30 or 357 cal?
Did you try them yourself? And how did it perform?
果然你们都是高手
Vv
Answer Your phone! or Text messages, please!
@@kluper1157 we are off today please try tomorrow