Gunpla Custom Build / SAZABI Ver.Ka LEG Part 04 - Panel line scribing
Вставка
- Опубліковано 8 вер 2024
- ◼︎ 제작의뢰 및 완성작 구매 문의 (Commission & Purchase Inquiry)
jackers7@naver.com or instagram DM (ravi_pla)
Notice - blog.naver.com...
◼︎ instagram
/ ravi_pla
◼︎ 제작의뢰 및 완성작 구매 문의 (Commission & Purchase Inquiry)
jackers7@naver.com or instagram DM (ravi_pla)
Notice - blog.naver.com/jackers7/222348230829
I have never touched a gunpla and seeing this level of skill makes me think I never will
Wow great series! I have a sazabi ver. ka for 3 years, waiting for the right time. It seems that time is near after seeing your detailed parts. Looking forward your finished sazabi!
keremcan kirilmaz You will make better than me. 😀👍
@@RAVIPLA probably you are one of the best , so doubt it ;)
One of the cleanest panel lines I've seen. Simply amazing.
Thank you for the compliment. 😀
You re good. I really respect u because you give a free educational videos for people to learn. Hope there is many modeler out there that have a kind attitude like you. Thumbs up and keep a good clean work.👍
akimyismail Thank you for watching the video well. I hope it will help you. 😀😀
akimyismail you’re welcome 😀 I'm glad my video helped you. 😁😁
Probably one of the best builders I've seen yet. You have some amazing skills thanks for sharing
Thank you for the compliment. 😄I hope to see my video and help a lot.
So glad you made a channel! It’s great to see your techniques in action!
I hope it will help you. 😄
I’m certain it will! 🙏
저는 오늘 외계인을 봤습니다...;;
어마무시한 사자비 탄생이 기대됩니다.
제닉님 영상 너무 잘보고 있습니다^^ 도색스킬이 수준급이셔서 PG 퍼스트 만드실때부터 구독해서 많이 배우고 있습니다^^ 앞으로도 좋은 영상 많이 부탁드릴께요. 감사합니다. 주말 잘보내세요~! ^^
두분다..괴물이십니다..좋은 영상 많이들
부탁드려요~~~^^
I swear if a MG Strike freedom 2.0 comes out I am looking forward to the day you make it look amazing. Nice video buddy.
Strike Freedom... That's a nice kit. 😁
Is amazing what you doing, I just yesterday I get my sazabi and I thinking about the metal pieces by ebay , hope can be easy for me because I'm new on this, collecting model kits
영상 너무 잘 봤습니다. 건프라 디테일업 입문하여 많이 헤매고 있었는데, 덕분에 페널리인에 있어서는 이제 어느정도 가닥이 잡힐것 같네요! 추후에 프라봉/프라판도 디테일업 어떻게 하시는지 강의식 영상 올려주시면 저는 너무 좋을것 같아요!!
네. 작업과정에서도 보여드리고 나중에 튜토리얼도 올려보도록 하겠습니다 ^^ 좋게 봐주셔서 감사합니다 ^^
Thank you for sharing your great skill.
I hope it will help you. 😄
it's very satisfying when watching this video, not just simply watching how to detailing but witnessing a great skill creating a masterpiece~keep up the good works RAVI
Thank you for watching the video well. 😀
Very beautiful work. Great video and easy to follow steps ♥️😊
I'm glad I can help you. 😄
That was Amazing, we may contract you out for our lead and custom suits, Peace and Love!!!
Sazabi ver Ka modification video, instant subscribsion.
Love the explanation :)
Might not try this myself any time soon, but I'll keep watching these to learn from it and be amazed by the work.
Ps. Just saw the providence video, how many days did that take to modify (excluding the paintjob)?
DCG909 I don't know the exact time because I work in my spare time. 😅
Excellent work I like how u put that extra part on the back of the leg
Thanks 😄
정말 대단하십니다.
존경합니다!! 다음 영상 빨리보고싶습니다
과찬이세요 ㅠ 틈틈히 작업하느라 시간이 좀 걸립니다 ㅠ 조금만 기다려주세요^^
And i can't even build that robots that comes with bubble gum... Sir... You got a follower
Ricardo Nakayama thanks 😃
Thank you for documenting this process. A lot to learn.
If I could, where did you get those small clear strips for guiding your scribing?
You mean the guide tape? I used HIQPARTS carving guide tape 3mm
thanks for this, it was really helpful to me. I hope to see more videos of yours.
Thank you for watching the video well. 😀
밥로스임? 참쉽지요 하는느낌 센스가 정말 부럽습니다
밥아저씨 생각나네요 ㅎ 좋게 봐주셔서 감사합니다. ^^
Excellent work. I hope maybe some day you will show us how you detail the hg Neo Zeong 😆
It's too big.😆😆 It probably takes a lot of time. 😱 😄
すごいセンスと技術。すばらしい。
きすけ ありがとうございます。
Just found your channel and your detail work blows me away. I subscribed right away.
Can you tell me how you choose the placement of the scribe lines you make on each part?
Dave D I come up with an idea while sketching parts before work. 😀 thanks for watching :)
I looked at the prices for those BMC chisels online and almost had a heart attack. They are not cheap! But they look so effective. I might need to look online for an alternative...
BMC is expensive, but these days there seem to be other tools available to replace. Let's find out if there is a good alternative. 😀
@@RAVIPLA From what I have seen there are cheaper versions available out there for this, and each one is around $10 or less. For 0.15 though you'd likely have to stick with BMC as I can't see any other alternatives at that price.
In Korea, the price of 0.15mm is about six Big Mac burgers. It is expensive. But if you use it carefully, you can use it for a long time.
Making your own tools is an option! You can make your own by carefully sanding a sewing needle (sewing needles are a harder steel) into the shape/angle you want, and then inserting it into a handle (wood, plastic, etc). Maybe not as machine accurate as the store bought one, but will do similar, and get you practise if you decide to upgrade.
Buy the USTAR ones. They are good and the price is awsome
오늘날 인류는 이것을 "신" 이라고 부른다
great job .. but looking at this in my mind i just hear myself say "look here after 8 months i have finally completed .... 25% of one gunpla kit" XD
Aoi Kuroyuri Thats literally how it is though. It takes a long time for these modelers as well but they’re probably making it for a modeling contest or just because they really want to build something complicated. The time spent to reach your goal is usually a lot more fun and rewarding than actually reaching your goal
This is cool and all... Until you try to do the same thing to the other leg.
찾았다~!! 끈기와 집념의 실력자~!!
이형호 좋게 봐주셔서 감사합니다 😊
Incredible work. Now you have to do the same to the other leg haha
I've already done it. I work on the other side at the end of each task. 😀
Love these videos, Ravi! Keep up the good work. :)
Thanks 😄
진짜 스킬이 대단하십니다!!
질문드립니다~ 핀바이스 1.6mm로 홈파고 스핀블레이드도 1.6mm로 작업하신건가요? 스핀블레이드도 하나 구매하려고하는데 MG에선 어느사이즈가 많이 쓰이는지 궁금합니다!!!
네 스핀블레이드도 1.6 입니다. 영상에서 사용한 에칭파츠가 1.6 입니다. 사용하시는 에칭파츠나 메탈비즈 사이즈에 맞게 구매하시면 됩니다. MG 사이즈에 저는 그때그때 다른데 제가 가지고 있는 옵션파츠는 1.3, 1.5, 1.6 등 다양해서 그때에 맞는 사이즈를 사용합니다 ^^
RAVI PLA 감사합니다~ㅎㅎ 참고해서 주문하도록하겠습니다~ㅎㅎ
와우~ 완성작 너무 기대되네요~~
열심히 만들어 보겠습니다. 좋게봐주셔서 감사합니다 ^^
Awesome 🔥🔥
wow what awesome skills, great video.
Thank you for the compliment. 😄
Ur symmetrical techniq is awsome
It is difficult to draw symmetrically. 😭 Thanks 😄
@@RAVIPLA i hope u make a tutorial how to symmetrical on curve parts and some model panel line cant draw with the divider trick maybe u can share alternate techniq for us thanks and great work
I'll share it when I think of a good way. 😀
Cant wait to see the other part 👀👀
hehe bro.. 😁Thanks for watching every time.
@@RAVIPLA no problem bro, i support you, keep it up 👍👍😀
멋있네요 ㄷㄷ 죄송하지만 다음 작품으로 볼버카도 디테일업 한번 보여주시면 안될까요.
저같은 초보들이 혹시 망치더라도 부담없이 시도해보기엔 가격싸고 퀄리티 좋은 볼 버카 만한게 없을것 같습니다.
볼버카는 충분히 디테일이 괜찮게 나와서 추가하기가 좀 애매한거 같더라고요~ 참고하겠습니다. 감사합니다 ^^
What is the green tool he's using at 0:31? And what kind of tape is he using for guides?
Dalduren Please refer to this video. 😄 ua-cam.com/video/uhy1AwiMbrU/v-deo.html
Love the videos. Can't wait to see what u do next.
Thanks 😀please wait 😄
꼼꼼하시네요 잘보고 배우고갑니다~^^
anry kim 좋게 봐주셔서 감사합니다 😊
Awesome job men you Really go the extra step and it really worth it. You got my sub ;)
Thank you for the compliment. 😄Thank you for subscribing :)
역시 손맛이 대단하신 분^^
질문이 있는데 록타이트 401에 주사바늘 꽂아쓰면 바늘구멍이 막히지 않나요?
전 주사기에 조금씩 덜어서 쓰다가 바늘 막히는 것을 해결 못하겠더라구요
정준영 바늘구멍이 막히면 라이터로 바늘 앞부분을 잠깐 달궈주면 연기나면서 뻥 뚫려요 ㅎ
RAVI PLA 그런 방법이라니. 감사합니다 손맛님!
Great work, keep it up.
Thanks 😃
このレベルだともう作る気力がなくなる。お金出すので、売ってください(*‘ω‘ *)
Great work. May I ask what kind/brand of primer do you use? Ty in advance.
i used gaianotes surfacer 😄
Very instructive!
Thank you for watching the video well. 😄
Where do you find this little pieces of white plastic parts at 1:27 ?
U doing great job bro
Thanks 😁
초반에 나오는 종아리 뒷부분 파츠에 긴 타원양각은 곡선부위가 패널날인 딸때 엄청 어렵던데 노하우가 있나요?
우광헌 그 부분은 저도 숨참고 파줍니다ㅠ 노하우는 아니고 힘을 완전빼고 곡선을 따라 여러번 아주살살 긋다보면 길이 생기더라고요 그럼 그때부터 조금 힘을 주면서 파줍니다^^
Stylish. I like it a lot!
Thank you for the compliment. 😃
Amazing...❤
Thanks bro 😁😁
Awesome !!
thanks 😄
When do you use a 0.15mm and 0.2mm scribe on the same piece? Do you differentiate the panel and an access door with this scribers?
If the panel needs to be clearly identified, such as the area or door that you want to emphasize, use 0.2mm mainly. But it can vary depending on the situation.
이건 뭐 조각 수준 이네요ㄷㄷ
좋게 봐주셔서 감사합니다 ^^
Simply because you put more details on the pieces, it doesn't mean the finished product as a whole look better.
So many Gunpla builders, even those professionals, are putting way more details than necessary to a point where they'd be better off just have the entire thing engraved with checkered lines.
Skilled? Definitely.
But having a good tastes actually need more practice on the eyes.
exactly,and they don't make sense technically.
I have to translate your words. Please understand without being exact.
I just started working on Gundam details. It takes a lot of practice for me to adjust the overall detail balance. Thank you for your advice.
to each his own.
just because things doesnt look appealing to you.
doesnt mean its not for others.
@@carloagpoon7037 Sure. I shall not disagree. I do have to point out that there is a huge importance in balancing out the relationship between lines and surfaces. Focusing on a local piece sometimes can cause the entire work to loose its balance. That's why when you enter a local, small building competition, it is usually those that require the most amount of work that wins, but when you transition to some of the international competitions organized by groups like Hobby Japan, it is those that has the most unified, comprehensive finishes that stands out. That require more tastes over skills.
@@RAVIPLA Good luck with the exploration and practices in the future yet to come! You have demonstrated very promising skills! Wish you find that sweet balance between details and general picture. Have fun building :D
Teach me oh Gunpla-Sensei!
James Dobbs 😄 Thanks for all the praise.
@@RAVIPLA still waiting for the lesson ;)
can i please know what chisels you use, the brand you might recommend and where can i purchase them.thank you :)
I used BMC chisel. Search for sujiborido bmc chisel.
@@RAVIPLA thanks... will surely take ur advice... :)
Can I know the brand of the additional parts you use for the kits?
It's BANDAI BUILDERS PARTS (MS ARMOR 01)
RAVI PLA thanks! Any plans on using metals parts for thrusters?
I'm not sure yet. 😀
Amazing...
Btw, how much time u spent for this part??
I don't know the exact time because I work in my spare time.😅
@@RAVIPLA this is amazing, srsly.u deserve more recognition.
Keep on going buddy. Srsly love ur work
Thank you for the compliment. 😄
Hi thanks for your great tutorial video. One snap question mate, what is this thing used to fill in the scribed line that u want to erase at 7:01 Thanks!!!
It’s instant adhesive (loctite 401)
@@RAVIPLA Thanks for your reply. ^_^
Yuphonwatt Kimsunthorn you’re welcome 😄
Can someone tell me which brand made this big quadratic file? 8:35
Nicolas C I bought acrylic panel and attached the sandpaper. 😀
You sir, are a bloody maniac! Please, never stop!
Yes, I'll continue.
Did the extra piece you used come from the same kit?
No. This is BANDAI builders parts
Okay, dumb question.... how do you cut your scribing tape? Mine always wants to curl up off the roll! Awesome stuff btw. Very inspiring.
ModelMaker12 I cut the tape long and use it little by little. 😀
RAVI PLA do you use a metal plate to keep it on? If I use my cutting mat, it tends to lose its stickiness very easily. Thank you for all the help.
professional
Thanks 😄
godhands without even using godhands
I tried customing my gunpl. Ended ruining it. It's a lot harder than it looks, especially without the right tools
Is this 1/100 or 1/144?
넓은 스틱사포 말고 각진 스틱사포 정보존 알수있을까요???
정우택 재단한 아크릴 스틱에 종이사포 붙인거에요^^
where i can buy that white paper or what is that called?
Alvin REDDELTA sandpaper ? Please write the time.
Why pay $20+ for a scriber when you can use the hobby knife. Thanks for the vid. subSCRIBED
MAGNIFICENT
Thanks 😀
Crazy crazy!
amysdaddy1 thanks 😀
great work! How did you set up the camera?
Thanks :) I work with a camera stand on the side.
Thats art
Thanks 😄
Where can someone in the states get those chisels? Best I have found is the single Tamiya Scribing tool.
Search for 'sujiborido bmc chisel' 😄
@@RAVIPLA Thanks for the reply!
They're expensive 30 to 40 dollars a chisel.
djjaewon The bmc is good but expensive. There are other products at a lower price than that.
You expect to finish it this year?
I have a lot of work to do. But it's done enough within this year.
Awesome
Thanks 😄
음.... 글로 표현하려니 힘든데 골자기 같은부분(평면에 양각으로 튀어나온부분? ) 패널라인을 강조하고 싶은데 패널라이너로 하니 너무 굵어 지는데요. 좋은 팁이 있을까요????
양각으로 튀어나온 부분 주변을 따라 패널라인을 그어줄때를 말씀하시는 건가요? 패널라이너 사이즈는 몇미리 사용하세요? 저같은 경우는 이럴때 보통 0,125 나 0.15로 양각으로 형성된 주변을 따라 천천히 그어주는데 너무 굵어진다고 하시면 혹시 사이즈를 줄여보시거나 너무 깊게 말고 먹선이 흘러들어갈 정도만 파시는건 어떨까요? 철필과 같은 도구를 사용하면 프라스틱이 일어나서 저는 그냥 패널라이너를 이용해서 그어줍니다. 도움이 되셨는지 모르겠네요 😅
@@RAVIPLA 네. 양각주변이요. 0. 15나0.2사용했어요. 좀 더 얇은거로 살살 해볼게요. 감사합니다!!! 욕심이 과했나봐요.
나중에 궁금하신거 있으시면 또 질문주세요 😄
패널라인 팔때 가이드?로 붙이는 투명 테이프 같은거 정확한 명칭이 뭔가요... 그냥 테이프는 아닌거 같은데요..
패널라인 가이드 테이프 입니다. 제가 사용하는건 HIQPARTS GUIDE TAPE 3mm 입니다
@@RAVIPLA 아..답변감사합니다~
Is there a link where you can buy this model
I will sell to the person who wants to buy.
ターン系の足やな
You do know, this is the lead suit in the Moorish American Royal Amry, we have a big Defence Contract with Anaheim Eletronics, they'll be supplying us with suits during our up rising, ISLAM, Peace and Love!!!
I'm sorry. I translated your words, but I don't understand them. 😅
@@RAVIPLA All is well!!!
Thanks 😄
You scribe before priming right?
Diego Souza scribe - priming - painting :)
@@RAVIPLA I have a question. What do you use to panel line after paint?
Use enamel on the panel line after painting.
@@RAVIPLA thank you! You are very kind! Subscribed!
what kind of tape is that?
HIQ PARTS GUIDE TAPE 3mm 😀
@@RAVIPLA Thanks, I was wondering as well.
I would always check out the Hobby Japan magazines, but since I can't read Japanese, I never had a clue how they did alot of the customizations. Now I'm beginning to understand. Amazing work.
Wow
NSixtyFour thanks 😀
Would you sell your work? lol
When I'm done, I'll sell 😀
Way toooooooo many panel lines which make no sense.All armor design should minimize joints for the sake of better defense performance, it is not like modern airplane which requires many access points for easier routine maintenance. Unlike mobile suits, modern warplane's survival ability relys not on armor.
Defensive performance of armor? Yes, I see what you mean. Thank you for the comments.
OMYGOD
Thanks for watching.
손베일까봐 조마조마...
틱톡광고짜증나 나이프가 손에 익어서 괜찮아요 😊
디테일 파츠는 어디서 구입할수있나요?
건담베이스에도 판매하고 인터넷에서도 반다이 빌더즈 파츠 검색하시면 있습니다 ^^
Barbatos lupus rex please
Apple Jam I'm sorry. It doesn't have a plan yet. 😭
*bows* Senpi
Your works are so cool. 👍
Can't really call it a "how to" video with no explanations given.
I'm sorry. I've modified the title. 😅
@@RAVIPLA Cool. This is the first of your videos I've seen. Pretty awesome work you are doing. Keep it up.
mattyg303 Thanks for all the praise. 😄😄
テクニックが素晴らしい。
が、原寸のモビルスーツを考えるとディティールに説得力を感じない。
Stunning work. Boring music. Eh, to each their own. When you've got skill like that, you could put screaming cats in the background
ceasarspartacus I'm sorry. I've translated it. I don't know what it means.
bro i just snapped the pieces on and it took 5 min lmao
装甲なのに、バラバラにしすぎだと思う。
衝撃吸収がすごいんでしょ(テキトー