Carter Stabilizer Guide

Поділитися
Вставка
  • Опубліковано 8 лют 2020
  • Watch Alex demonstrate the Carter Stabilizer Guild and how you can make tight curve cuts with your bandsaw. Alex shows you how to create a bandsaw box by using the Carter Stabilizer Guide.

КОМЕНТАРІ • 49

  • @jamespolucha6911
    @jamespolucha6911 4 роки тому +4

    I did everything that EVERYONE on utube said to correct my bandsaw and it never worked right so I was shopping for a new saw then I met Alex at a wood show and he sold me what I needed and I bought it, might as well be tried everything, well it’s like magic it works perfectly and I can cut paper thin with no drift at all, I went back to the show and bought the stabilizer and it works perfectly also, I wish I met him earlier he’s a bandsaw G.O.A.T

  • @nickblumert3865
    @nickblumert3865 4 роки тому +3

    People are foolish for not subscribing to your channel!!!

  • @malcolmalexander5246
    @malcolmalexander5246 4 роки тому

    My RIK2 Carter Stabilizer is still working superbly on my Record BS400 bandsaw since buying it in 2014. Thanks Alex and the Carter team who are so very helpful.

  • @StockroomSupply
    @StockroomSupply 4 роки тому +1

    Keep up the good work Alex! Loving the videos 👍

  • @tractortinkerer11
    @tractortinkerer11 8 місяців тому

    Just found this video, awesome , thanks.

  • @rouxso5124
    @rouxso5124 Рік тому +3

    Alex i need a stabilizer for my bandsaw model GO555LX Grizzly can you tell me which one i need for my saw?

    • @bandsawlife2660
      @bandsawlife2660  Рік тому

      www.carterproducts.com/band-saw-products/band-saw-stabilizer/standard-model-1-std1

  • @davidvanderoord6943
    @davidvanderoord6943 Місяць тому

    The true master.we are not worthy

  • @mainormanzanares3368
    @mainormanzanares3368 3 роки тому

    Hello Mr. Snodgrass happy new year

  • @scottphillips5859
    @scottphillips5859 4 роки тому +3

    The master !!!

  • @rouxso5124
    @rouxso5124 Рік тому +2

    Wating for a answer Alex I watch you a lot on UTUBE

  • @jamesT8681
    @jamesT8681 Рік тому

    Alex, Does Carter make a blade stabilizer for an old Delta 9” bandsaw model 28-150. Hope so. Didn’t see it on the Carter website. Thank you.

  • @ivokolarik8290
    @ivokolarik8290 4 роки тому +1

  • @steveiv9250
    @steveiv9250 3 роки тому

    Alex you are the bandsaw king, Quick question, which Carter stabilizer should I purchase for my Rikon 14” 10-326 ? Looking to do some scroll work with my saw. Thanks Alex

    • @bandsawlife2660
      @bandsawlife2660  3 роки тому +1

      I believe it’s a Rik 1, but best to ask Kris Scates at Carter 888-622-7837
      There’s a possibility it could be a rik 3

    • @steveiv9250
      @steveiv9250 3 роки тому

      @@bandsawlife2660 Thankyou sir, Alex I’m relatively new to the world of bandsaw and wondering would I need to swap to the Carter blade guide system in order to use the stabilizer? I’m quite happy with my current bandsaws setup. but this Carter stabilizer is certainly a game changer for tighter radius and backing out of a project on the fly. Thanks Alex for your time.

    • @bandsawlife2660
      @bandsawlife2660  3 роки тому +1

      You can just add the stabilizer without upgrading the original guides.

    • @steveiv9250
      @steveiv9250 3 роки тому

      @@bandsawlife2660 Thanks once again Alex, as it turns out I will be needing the RIK 2 for my 10-326 delux Rikon. Now to place my order. Thank you sir for all your help and time. Cheers 🍻

  • @chino7669
    @chino7669 2 роки тому

    Good afternoon Alex, I have a craftsman 113.247210 band saw and I'm having hard time finding upgrades for it. Would be able to give direction?

    • @bandsawlife2660
      @bandsawlife2660  2 роки тому

      carterproducts.com/band-saw-products/band-saw-conversion-kits/sears-craftsman-12-model-113-tilt-table-hex-post-only

  • @stephenrousseau6475
    @stephenrousseau6475 Рік тому

    Alex does the blade Need to ride on the center of the bottom tire also?

  • @frankglass
    @frankglass Рік тому

    Interested in purchasing a Carter blade stabilizer. For doing scroll work, what blade should I use. 1/8,3/16, or 1/4?

  • @williamjohnsonjr.3733
    @williamjohnsonjr.3733 2 роки тому

    I have a jet 14 in sf bandsaw can u let me know which carter stablizer fits that's bandsaw so I make sure I order the right one?

  • @markr3547
    @markr3547 2 роки тому

    Carter needs to make a guide for the Grizzly models with the hex slot for the guides.

    • @bandsawlife2660
      @bandsawlife2660  2 роки тому +1

      They do I believe, give Kris a call at Carter Products 888-622-7837

  • @brendahamilton715
    @brendahamilton715 Рік тому

    Hi Alex. I messaged you recently concerning the Stabilizer for a Jet 10 Bandsaw. You responded very quickly & I do appreciate that promptness. I am a woodcarver & use my bandsaws to cut out blanks to carve, frequently needing to make very sharp turns & lots of curves. I was using a 1/4 in blade & couldn't make the turns, so I went to a 1/8 in blade. Even though I use just a very feather light touch, I am breaking the blades constantly.(I haven't received my Stabilizer in the mail yet). Will the stabilizer help with that? Could I possibly go to a 3/16 or 1/4 in blade with it & make these turns? HELP! I am eating up all my profits on my carvings buying blades!

    • @bandsawlife2660
      @bandsawlife2660  Рік тому

      The stabilizer will definitely help. Perhaps a 3/16” 4 tpi which will turn about the size of a dime would last a bit longer as well

    • @brendahamilton715
      @brendahamilton715 Рік тому

      @@bandsawlife2660 Thanks for your help! Can't wait to get my Stabilizer!

  • @theeclecticlife
    @theeclecticlife 7 місяців тому

    What size blade is that in the video

  • @mainormanzanares3368
    @mainormanzanares3368 3 роки тому

    I was wondering if I could get a minute of your time sir I'm having trouble with my stabilize

  • @dawnbigwarfe6871
    @dawnbigwarfe6871 9 місяців тому

    Please come to my house and help me with my bandsaw. I am having an awful time getting the blades to track properly

    • @bandsawlife2660
      @bandsawlife2660  9 місяців тому

      What kind of saw do you own.

    • @dawnbigwarfe6871
      @dawnbigwarfe6871 9 місяців тому

      @@bandsawlife2660 I purchased a jet SWBS-14SFX last year and have approximately 3 hours of run time on it. I have changed the wheel tires this week because the blade kept messing up the bottom tire. Was using a 3/8” blade at the time. Changed to a 1/4” blade yesterday. Seems better but not yet convinced I could saw a board as you show in your videos. I have tensioned the blade as you show in your videos because the tension chart is totally useless.