Revit Tutorial - Folding Door (Parametric Family)

Follow me on Instagram = / letsrevit.tutorials
For inquiries, email me at [e-mail]
Folding Door (Bi-Fold) = • Revit Tutorial - Foldi...
In this video, I have created a parametric folding door in the door family template file. You can change the angle of the folding door between 0 to 90 degrees and you can also change the height and width of this folding door.
Like, share and subscribe for more tutorials.
Feel free to ask any queries related to Revit. Also if you need any specific tutorial, you can ask me and I will try to upload it.
revit tutorials, autodesk revit, massing technique, complex forms in revit, revit commands course, revit basics, learn revit, revit families, revit blocks, family template files, how to create models in revit, massing tutorials, residential projects in revit, interior designing in revit, revit lights, rendering in revit, complex roofs in revit, building informtion modelling, bim, reference planes, reference lines, reference points

[@shebinjawahar1]

thanks a lot maam, you are awesome . at first i had a confusion between ref plane & ref line . in the second attempt , i carefully watched the video again and done the ref plane n ref line correctly . kudos to you

[@georgeziffo6412]

Great tutorial, thanks

[@LC-nw2co]

Great tutorial! Thank you!

[@locolegs1000]

It's very good. Thanks!

[@famgroeger]

thank you for this tutorial. it was very useful for me to learn the concept of making families. for me the speed of showing could be slower. it helps when your comments are in context to what you are showing/doing. i got mixed up with refplanes and lines a lot. but at the end the difference between them was one thing i learned with this video ... all the best Michael

[@thadyjuinio9916]

best tutorial !!

[@warunijayasinghe8854]

is there a way to change the number of panels? the panel count

[@anasssaddane1475]

Awesome !! Very helpful

[@garthcarnell5420]

how did you get your sweep to the center of the wall?

[@sayanbanerjee8727]

Please make a vedio on parametric shutter door

[@ribeeshtj4796]

GREAT

[@arquitectorais4651]

Is it possible to make one door panel as a family and then repeat it?

[@pmshihas]

Rocket science is simple than it ....

[@thameezgamer6332]

I can't use formula it's showing as following is not a parameter width note that parametric names are case sensitive do u know the reason...?

[@taimursohail1723]

Mám how u drive this formula 40mm*sin (angle).
W
Can u plz explain 40 mm from where u got. Why it is not width of panel*sinangle

[@LetsRevit]

40mm is basically the thickness of the panel. For this formula we needed the thickness not the width of the panel.

[@taimursohail1723]

@@LetsRevit today again I tried and made this family after seeing your video again and again with concept. Thanks for your valuable knowledge plz keep sharing and don't make this video private

[@iftekharkhan8879]

Hi mam ..why u place three references plane at r.h.s at 5.20

[@tiffanytan557]

placeholders to count for the panel thickness at an angle

[@hadyhesham9340]

Thanks for this awesome tutorial. However, when placing angle=0 and traying to increase it again all the 4 reference lines connect to each other and leave the reference plane connected to them

[@emiliosabry]

the same thing happened to me, can't make it right

[@sohail3360]

👍

[@taimursohail1723]

Salam to u Madam, mujay ko to ab meri education per shak honey laga hai, that really I am educated?

[@WibuTeknik]

02:46 ?

[@LetsRevit]

Yes. Can you elaborate the issue which you are facing at this step?