Thank you so much for such a clear explanation on how to remove the cover and disconnect the wires. This is by far the best explanation I’ve found and helped me fix my fridge by myself. Mine actually popped out - it was a lot of plastic connectors and had to be popped out a side at a time.
This video was really helpful. Our fridge dispenser tube wasn’t aligned well and I used this video to figure out how to remove the front panel and all I had to do was to realign the tube back in the dispenser hole and it’s working perfectly!! It took me about 10 minutes.
This helped a lot. I changed the water dispenser socket for the filter, the pump in the back and had tried defrosting multiple ways. I couldn’t figure out how to get to the line in the freezer door and once I watched this, ripped the whole line out, got rid of the chunk of ice in it, fished the line back down the door (had to cut on end with a point to make it through the hole, boom, water again. Thanks again! Learned alot with this whole adventure haha. Full fridge disassemble your fix a dang frozen dispenser hose in the end
Thank you! After replacing the valve in the back, it still didn't work. Turns out the line had a small frozen part, keeping the water from coming out. Hope this comment helps someone and keeps them from buying a valve they don't need. 🙂
Thank you for this video. It’s been the most helpful one I found so far. I turn the heat down as low as I could in the house so that the pipes wouldn’t freeze but also the heat wouldn’t be running constantly while I was on vacation. It took a day or two even after I had gotten back before the ice had built up in the line or a chunk of ice became dislodged and obstructed the waterline completely. I thought maybe my solenoid had gone bad but then I found this video. I said let’s start with a simple thing first. I pulled the line out and sure enough it was frozen up close to the nozzle. I took some string trimmer string and push the ice out and I had to feed the line back in backwards because of the sharp arc that was where it used to curve into the nozzle would not feed back through. So I just flipped it over and bang. Thank you
Thanks for the video. Was able to locate where the line egressed from the fridge part of my Frigidaire to prove it had to be a blocked/frozen line to dispenser. From there I just squirted very hot water up the nose of the dispenser and iced cubes flowed out and voila!
Thank you so much for this video. I fixed the water dispenser just following your directions. In my case, it was only the valve, it was out of place after the pressure generated when I changed the water filter.
@@TryThisDIYFix I literally just had this same exact problem and just fixed it after finding this video! I had found others using other models, but was happy to find yours to see how to get my particular panel out of the way. Thank you for this! Always happy to have a simple fix.
Thanks so much for your video. I was just about to fixed my today. And I had this issues for over a year I was buying water in bottles. Now all is running perfectly. Thanks so much appreciate blessings.
While moving my refrigerator the water line became dislodged causing the water to spill onto the floor. Thanks, I was able to repair it, although my outer cover panel was extremely tight. Thanks again.
Thanks i have this same version and our hose had fallen off inside so water was going all over. Opened it up and pushed it back in and all working now.
Video was good. How do we change the other water line from back of fridge where the water comes in from the water source, to the connecting point of front of fridge line?
Hi! Loved this video. Do you think you can do one explaining the three tubes on the back of the fridge? I can't blow air through one but am not sure if that's why mine isn't dispensing water
How did you learn to do all this stuff? After I watch your videos I always feel like I’ve learned something and that I’ve clearly missed out on a lot of skills in my life. Lol
Haha! I feel the same! There are so many things I wish I knew! But I’ve learned most of this because of circumstances, either it happened to me or I’ve been meaning to do it. Ha. But thank you so much!
Nice video. Saw another which was just as good. So, my question is, how long does your dispenser take to fill a 12 oz glass to about an inch from the top? My KitchenAid (2001) takes about 45.47 seconds. Your water flow looks slow like mine but I am curios if its the same. I think it is too slow. I've done filter changes but it has always been slow. Drives me crazy. Try filling the pitcher with water after you've changed the filter. OMG... like listening to your hair grow! I don't know what to do about it!
One thing you could do is change the size of the water line. Mine isn’t too bad, it would probably take 30 seconds to fill up a cup. But you could try changing the line to a larger gauge and that might help speed up the process.
Our refrigerator has small white pieces coming out of the water hole. Is it possible that this is part of the old plastic tube coming off? I have put a new water filter in and nothing changed
Hmmm. Can you tell what these pieces are? It could be from your water, filter or pipes. I would try and determine what these pieces are and go from there. Let me know what you find.
How do I remove the INTERNAL water dispenser (model: GRFG2353AF) to access the water line? Can I just pull the water line from the right top door hinge? Thank you!
I have tried this but my fridge (DSS25KSTE SS) the water line is a pvc spout. No real way to replace the line without replacing the fridge door which they don’t sell anymore. Any suggestions?
Is all the line pvc or just the end? You could get a connector and then use the line I have in the video. Connect the pvc to the line after it comes from the box.
The issue I've been having lately is I press a cup against the lever to run the pump and draw water, but after letting off the pump the water flow keeps dribbling out afterward to where the catch tray fills up after a few refills of the cup and then spills out onto the floor.
@@TryThisDIYFix no, the old one came out but the new one hits something near either end. i keep trying the slight pull back then push techniques but no avail 😕
It takes 45 seconds to fill 1 cup (measuring cup) via my water dispenser. I think this is because the water pressure in the copper pipe entering the fridge is too low. How long should it take to fill 1 cup (measuring cup)?
I’m trying to trouble shoot my refrigerator water dispenser. It appears to be spraying water out the side of the door when dispensing water only. Not when dispensing ice or when the ice maker is refilling. Is the water line vulnerable to breaks inside the door? Or should I loom for something wrong from the water filter? The line comes up through the bottom of the unit but the filter is at the top left corner of the fridge. Which leads me to believe something else could be leaking. I haven’t found a schematic drawing of the fridges interior works yet.
I’m not 100% sure either. You could try this fix and see if this is the culprit. That’s actually what my problem was. The water line was pinched and had a small leak. But I’d try this and see if it works since it’s a pretty cheap fix. Let me know if it works.
@@TryThisDIYFix took the door hinge cover off and discovered the leak is a worn water line from the filter to the ice maker. No wonder the leak wasn’t making sense, it was squirting out the top and down through the door seal. Weird. New wAter line is on its way.
My frigerator is a general electric GSH25JFXN space BB serves repair man is telling me I gotta replace the whole door and that tube can’t come out of my model could you help me to tell me if that’s true or not
Yes sir!!!!! Tried pulling from both ends. Ice build up in the passage itself. Made my saturday weekend so fulfilling. Thanks, thanks again for the advice.!!!😀❤️
Yeah you should be able to clean it out. Maybe even run some vinegar or something through it. If that doesn’t work, the line is pretty cheap so you can replace it.
Thanks for the video. Was able to locate where the line egressed from the fridge part of my Frigidaire to prove it had to be a blocked/frozen line to dispenser. From there I just squirted very hot water up the nose of the dispenser and iced cubes flowed out and voila!
I removed the cap at the top of the door. And where they bend the water line to push it down there was a kink and it was obviously broke allowing air into the line.
Thank you so much for this. It helped me when my water line slipped out from the dispenser and had water going all over.
I’m glad it helped and got it back going!
@@TryThisDIYFix I would have been so mad if I paid someone to simply push the line back into place.
@@Niakoda yeah sometimes it’s just a little fix!
That is the same exact thing that I had happen today. Hoping I can get it fixed now myself!
@@pamm7494 yeah I hope so! Let me know how it goes.
Thank you so much for such a clear explanation on how to remove the cover and disconnect the wires. This is by far the best explanation I’ve found and helped me fix my fridge by myself. Mine actually popped out - it was a lot of plastic connectors and had to be popped out a side at a time.
You are welcome! Feel free to subscribe for more helpful information. Thanks
Awesome video
Very helpful
Hands down every video should be like this one ☝️
Awesome! Thank you! I appreciate that.
This video was really helpful. Our fridge dispenser tube wasn’t aligned well and I used this video to figure out how to remove the front panel and all I had to do was to realign the tube back in the dispenser hole and it’s working perfectly!! It took me about 10 minutes.
Wow! That’s awesome! I’m glad it helped!
This helped a lot. I changed the water dispenser socket for the filter, the pump in the back and had tried defrosting multiple ways. I couldn’t figure out how to get to the line in the freezer door and once I watched this, ripped the whole line out, got rid of the chunk of ice in it, fished the line back down the door (had to cut on end with a point to make it through the hole, boom, water again. Thanks again! Learned alot with this whole adventure haha. Full fridge disassemble your fix a dang frozen dispenser hose in the end
Hey that’s great you fixed it though! Great job. Thanks for letting me know! Keep up the great work!
This is exactly what I did. t
There was a small part of the line that was frozen. Great DIY Video!! @@TryThisDIYFix
@@billrayson5632 awesome! I’m glad it helped! Thank you.
Thank you! After replacing the valve in the back, it still didn't work. Turns out the line had a small frozen part, keeping the water from coming out. Hope this comment helps someone and keeps them from buying a valve they don't need. 🙂
That’s good to know. Thank you.
Thank you for this video. It’s been the most helpful one I found so far. I turn the heat down as low as I could in the house so that the pipes wouldn’t freeze but also the heat wouldn’t be running constantly while I was on vacation. It took a day or two even after I had gotten back before the ice had built up in the line or a chunk of ice became dislodged and obstructed the waterline completely. I thought maybe my solenoid had gone bad but then I found this video. I said let’s start with a simple thing first. I pulled the line out and sure enough it was frozen up close to the nozzle. I took some string trimmer string and push the ice out and I had to feed the line back in backwards because of the sharp arc that was where it used to curve into the nozzle would not feed back through. So I just flipped it over and bang. Thank you
I hear ya! I’m glad you were able to fix it. Thanks for letting me know!
Because of your video, my issue was fixed in 8 minutes flat. Thank you for your time and efforts!
You got it! Thanks for letting me know and for watching!
Please consider subscribing for more videos. Thanks
Thanks for the video. Was able to locate where the line egressed from the fridge part of my Frigidaire to prove it had to be a blocked/frozen line to dispenser. From there I just squirted very hot water up the nose of the dispenser and iced cubes flowed out and voila!
Awesome! I’m glad it helped! Thanks
Thank you so much for this video. I fixed the water dispenser just following your directions. In my case, it was only the valve, it was out of place after the pressure generated when I changed the water filter.
That’s great! I’m glad you were able to fix it!
@@TryThisDIYFix I literally just had this same exact problem and just fixed it after finding this video! I had found others using other models, but was happy to find yours to see how to get my particular panel out of the way. Thank you for this! Always happy to have a simple fix.
@@JessInTheBox522 awesome! I’m glad it helped!
What kind of screw? My is exactly like yours but the screw looks flat and rusted, I can't get the screw out
@@bobbyvassey7339 which one?
Thank you, I've had a problem for years and this gave me the steps to fix my water dispenser 😊
That’s awesome! Thanks for letting me know! Feel free to subscribe for more helpful videos.
Just helped so much. Frozen line in that line. Might still be problems but at least I know what happened.
You got it! I’m glad it helped!
Thank you. That fixed it. It was frozen.
Awesome! Glad it helped!
TYVM! Perfect handyman dad fix it video. I really Saved some money and learned fast and easy. Do more videos good and kind ser.
Thank you for that! I’m glad it worked!
Good job, your Fridge is the same as mine, seems pretty simple. Thanks so much I love UA-cam.
Thank you! Yeah same here! I hope this helps!
Thanks so much for your video. I was just about to fixed my today. And I had this issues for over a year I was buying water in bottles. Now all is running perfectly. Thanks so much appreciate blessings.
That’s awesome! Thanks for letting me know! I’m glad it worked!
What are the symptoms for this needing replacement ?
While moving my refrigerator the water line became dislodged causing the water to spill onto the floor. Thanks, I was able to repair it, although my outer cover panel was extremely tight. Thanks again.
That’s awesome! That’s what happened to me as well! I’m glad it worked. Thanks for letting me know!
My first time doing this. Job completed. Thank you !
Awesome! I’m glad it helped! Feel free to subscribe for more helpful tips.
Thanks i have this same version and our hose had fallen off inside so water was going all over. Opened it up and pushed it back in and all working now.
That’s great! I’m glad you were able to fix it! Thanks for letting me know!
Thank you so much. Your video not only saved me money but a tremendous amount of time. So easy. Thanks again.
That’s awesome! Thanks for letting me know! Feel free to subscribe for more helpful videos. Thanks again!
Because you shared this video, my issue was fixed quickly, too. Thank you.
That’s awesome! I’m glad it worked for you! Thanks for watching! Feel free to subscribe for more helpful videos.
Video was good. How do we change the other water line from back of fridge where the water comes in from the water source, to the connecting point of front of fridge line?
You would do the same thing. Cut the water off, unplug the line or cut it and then put the connector on and feed it back through.
I fix my line for your video, thanks
That’s awesome! I’m glad it helped!
Loved the video it was very helpful I managed to fix my waterline on my refrigerator
That’s awesome! I’m glad it helped! Thanks for letting me know!
Just what I needed
Awesome! I’m glad it helped!
Thank you so much, that was very helpful.
You got it! I’m glad it helped!
Thank you. Exactly what we needed.
Awesome! You got it!
I replaced the water filter, but water still doesn’t come out. I guess I’ll try swapping out the water line. It looks manageable.
Yeah it’s not too bad. You can do it.
Hi! Loved this video. Do you think you can do one explaining the three tubes on the back of the fridge? I can't blow air through one but am not sure if that's why mine isn't dispensing water
Hmmm. I’ll have to look and see what mine look like. I don’t know if I have 3 back there.
Thanks dude!! You were incredibly helpful.
You got it! I’m glad it worked!
How did you learn to do all this stuff? After I watch your videos I always feel like I’ve learned something and that I’ve clearly missed out on a lot of skills in my life. Lol
Haha! I feel the same! There are so many things I wish I knew! But I’ve learned most of this because of circumstances, either it happened to me or I’ve been meaning to do it. Ha. But thank you so much!
thank you so much... it helps big time and save us some repair cost.. 🤩
You are welcome!!!!! I’m glad it helped!
Your video was super helpful. It have all the information i needed to get the front cover off. thanks
You got it. Thanks for watching! You can subscribe for more helpful videos.
Hello, thank you for your help, my fridge freezer is Kenwood, I don't know how to solve the problem, because there is no screw to open the screen.
Hmm. Can you get to it from the backside?
@@TryThisDIYFix I don't know, I will take the test. I will tell you later what happened. Thank you
@@behzadfalahat2732 sounds good. Yes let me know how it works for you.
Nice video. Saw another which was just as good. So, my question is, how long does your dispenser take to fill a 12 oz glass to about an inch from the top? My KitchenAid (2001) takes about 45.47 seconds. Your water flow looks slow like mine but I am curios if its the same. I think it is too slow. I've done filter changes but it has always been slow. Drives me crazy. Try filling the pitcher with water after you've changed the filter.
OMG... like listening to your hair grow! I don't know what to do about it!
One thing you could do is change the size of the water line. Mine isn’t too bad, it would probably take 30 seconds to fill up a cup. But you could try changing the line to a larger gauge and that might help speed up the process.
Thank you! I need to replace mine !
Nice! You got it!
@@TryThisDIYFix what size line do you need to replace it?
@@TheMarcie1972 you can see the link in the description. I think the size is on there.
So helpful! Thanks!
You got it! Thanks for watching! Feel free to subscribe for more helpful videos
Very helpful video. Now I will go and fix my water problem.
That’s awesome! I’m glad this helped! Thanks for watching!
Gr8 video. Thanks! 😊
You got it!
How do I know if the drip problem stems from this repair that you are showing or the contraption in the back, as other videos suggest?
I know from my example the door was damaged so I knew it had to be in the line.
Superstar! Just what I needed. I appreciate your video. Got my issue fixed.
You got it! Glad it helped!
My problem is the pipe from inlet valve to the coupler, its broken will that feed through as easy as the route up you showed ?
Hmmm. Possibly. I’d try it and see.
Excellent! I fixed it! Thanks!
That’s awesome! Thanks for letting me know! Subscribe for more helpful videos. Thanks!
Great video! Thank you
Thanks. I hope it helped!
Our refrigerator has small white pieces coming out of the water hole. Is it possible that this is part of the old plastic tube coming off? I have put a new water filter in and nothing changed
Hmmm. Can you tell what these pieces are? It could be from your water, filter or pipes. I would try and determine what these pieces are and go from there. Let me know what you find.
This was helpful.
Awesome! I’m so glad it helped!
Great video
Thank you.
How did you shut the water off?
I turned the water off to the house.
How do I know if the drip problem stems from this repair that you are showing or the contraption in the back, as other videos suggest? 6:35
That’s a great question. For me the door fell so I knew it was probably the line.
Thanks. I think we will replace the part in the back, first.
@@MariseGalgano nice. Lmk if that works.
As soon as the part comes in and it’s replaced!
@@MariseGalgano sounds good!
Nice video, i have the same fridge but the hose is stuck and i can't get it out. What I can do?
Hmm. Have you tried to pull it out either way? It might be stuck on something or pinched.
Thank you for the video. It's bee awhile since you posted this and it looks like the valve you have an affiliate with is no longer available.
Thank you so much! I appreciate the help!
How do I remove the INTERNAL water dispenser (model: GRFG2353AF) to access the water line? Can I just pull the water line from the right top door hinge? Thank you!
I’m not sure. I think so.
Is the 1/4 ID or OD?
I have a link for it in the description.
Where to I get that connector from?
I have a link below.
What size was the water dispenser line.
Check the link in the description. I have it there. I know it was a different size than originally because I had to get a different connector.
Can you fix mine or recommend someone in my Lawndale, California area
You could try these fixes in the video or look for a local appliance guy.
Thank you so much !!!
You are welcome! I’m glad it helped!
I have this exact same refrigerator. Is your water pressure low as well. Takes about two minutes to fill up one water bottle
Hmm. No mine isn’t low. Is the rest of your water pressure low? If not it could be something wrong with the line or a small water line itself.
This video solved my issue. Thank you
Awesome! You are welcome! Feel free to subscribe for more helpful videos! Thanks again!
I have tried this but my fridge (DSS25KSTE SS) the water line is a pvc spout. No real way to replace the line without replacing the fridge door which they don’t sell anymore. Any suggestions?
Is all the line pvc or just the end? You could get a connector and then use the line I have in the video. Connect the pvc to the line after it comes from the box.
Great video my friend!
Hey thanks for watching! Please subscribe for more videos! Have a great day!
The issue I've been having lately is I press a cup against the lever to run the pump and draw water, but after letting off the pump the water flow keeps dribbling out afterward to where the catch tray fills up after a few refills of the cup and then spills out onto the floor.
Hmmm. That’s odd. You could try to replace the line. But that might be something with your switch to cut the water off.
what about the line that goes through the fridge? you just changed the connection points
Yeah that was the only bad part for mine were the connections.
Thank you!
You are welcome! Thanks for watching! I hope it helped.
does anyone know the size of this tube thanks
Hey yes, in the description I have a link to the line. Check there first. Let me know if you have any questions. Thank you!
Awesome video, thank you so much
You got it! Thanks for watching! Feel free to subscribe for more helpful videos! Thanks again!
Helpful but I need to replace the whole systems lines
Thanks! Yeah. You should be able to pull them out from the back I believe.
Vielen Dank und schöne Grüße aus Deutschland
Thanks
Ugh can NOT get the new water line to come out the bottom or top😡 any tricks?
You can’t pull it out? It might be pinched. If you get it disconnected go ahead and pull it.
@@TryThisDIYFix no, the old one came out but the new one hits something near either end. i keep trying the slight pull back then push techniques but no avail 😕
@@CalvertFitness hmmm. I’m not sure. You might could try to push a piece of wire. But that’s all I can think of. Lmk if you figure it out.
@@TryThisDIYFix i might remove the whole damn door to get a better angle and be able to fish a line in there!
@@CalvertFitness haha! I hear ya! I’ve had some of those as well. Good luck!
So a putty knife… never heard of that tool. Thx
Yeah. Very useful tool! Thanks for watching!
It takes 45 seconds to fill 1 cup (measuring cup) via my water dispenser. I think this is because the water pressure in the copper pipe entering the fridge is too low. How long should it take to fill 1 cup (measuring cup)?
Wow, that’s a long time. Mine only takes 15-20 seconds. I’d take a look at that.
I’m trying to trouble shoot my refrigerator water dispenser. It appears to be spraying water out the side of the door when dispensing water only. Not when dispensing ice or when the ice maker is refilling. Is the water line vulnerable to breaks inside the door? Or should I loom for something wrong from the water filter? The line comes up through the bottom of the unit but the filter is at the top left corner of the fridge. Which leads me to believe something else could be leaking. I haven’t found a schematic drawing of the fridges interior works yet.
I’m not 100% sure either. You could try this fix and see if this is the culprit. That’s actually what my problem was. The water line was pinched and had a small leak. But I’d try this and see if it works since it’s a pretty cheap fix. Let me know if it works.
Thanks. I’ll give it a try.
@@TryThisDIYFix took the door hinge cover off and discovered the leak is a worn water line from the filter to the ice maker. No wonder the leak wasn’t making sense, it was squirting out the top and down through the door seal. Weird. New wAter line is on its way.
@@michellewelch6013 I’m glad you were able to find the problem!
very helpful
Thank you! You can subscribe for more helpful videos! Thanks!
Where can I buy a connector? My connection isn't good and water leaks every time I use it
Dang sorry about that! You can check the description I have a link there. Thanks. Let me know if it works.
What screw driver did u use??
For mine I believe it was just a regular flat head screwdriver. Are you having problems?
My frigerator is a general electric GSH25JFXN space BB serves repair man is telling me I gotta replace the whole door and that tube can’t come out of my model could you help me to tell me if that’s true or not
Hmmm, I’m not sure. I think you could try this fix first and see if the tube comes out. If it doesn’t then you can replace it.
Thanks
You got it. Feel free to subscribe for more helpful videos.
My waterline is super-stuck!!!!! Cant yank it out.
Hmm. It might be kinked up. Can you try both ways?
I will try from bottom. Thanks for quick response!!😀
@@gnboy344 you got it. Did it work?
Yes sir!!!!! Tried pulling from both ends. Ice build up in the passage itself. Made my saturday weekend so fulfilling. Thanks, thanks again for the advice.!!!😀❤️
@@gnboy344 that’s great. It is nice to see a finished project! You are welcome! Glad it helped!
Is it 1/4 line
I believe so. I had to get the converter for it. Feel free to like and subscribe for more helpful videos. Thanks
awesome
Thank you! Please subscribe for more helpful videos! Thanks
I'm pulling mine from down and up and it doesn't come out!!
Hmmm. It could be in a bind in there. Maybe try to use something to push it out. Let me know if that works.
My cat bit a hole bit in mine...
Oh wow!
My water line is dirty at the tip. Maybe I can clean it now.
Yeah you should be able to clean it out. Maybe even run some vinegar or something through it. If that doesn’t work, the line is pretty cheap so you can replace it.
I don't think it was your hose I think it was the connector I know cause that's my problem that I just fixed
Nice. Thanks. I think it could have been both. My hose was crimped from the door falling. Thanks for watching!
Thanks Baker Mayfield. Boomer Sooner
Hahaha. I wish.
👍🏼👍🏼👍🏼
Thank you!
He keeps covering up the important steps with his hands and arms.
Hahaha. My bad!
Thanks for the video. Was able to locate where the line egressed from the fridge part of my Frigidaire to prove it had to be a blocked/frozen line to dispenser. From there I just squirted very hot water up the nose of the dispenser and iced cubes flowed out and voila!
Awesome!
Great video.
Thank you.
How do I know if the drip problem stems from this repair that you are showing or the contraption in the back, as other videos suggest?
Fir my situation the door fell off so I had to fix it.
How do I know if the drip problem stems from this repair that you are showing or the contraption in the back, as other videos suggest? 6:35
My door was damaged.
I removed the cap at the top of the door. And where they bend the water line to push it down there was a kink and it was obviously broke allowing air into the line.
Thank you!
You got it. Thanks for watching! Feel free to subscribe for more helpful videos. Thanks.
Thank you!
You got it. Thanks for watching! Feel free to subscribe for more helpful videos! Thanks.