Opel Corsa 1.4i Utility Testing Air Idle Valves

Поділитися
Вставка
  • Опубліковано 9 січ 2025

КОМЕНТАРІ • 41

  • @BasicKustoms
    @BasicKustoms 9 місяців тому +3

    This Channel has made me want to buy a Corsa Gamma

  • @stewardmatthee7076
    @stewardmatthee7076 2 місяці тому +2

    Love your videos really appreciate it it help's me a lot

    • @solveitautomotive9485
      @solveitautomotive9485  2 місяці тому

      Thank you 👍. Consider joining as a member , you will have direct access and more technical detailed videos.

  • @stewardmatthee7076
    @stewardmatthee7076 2 місяці тому +2

    Will you make a video of the speed sensor on the gearboxes

  • @nbmaint
    @nbmaint 15 днів тому

    Hi, im a big fan. I recently replaced oxygen sensor on my bakkie the after started idling funny.

  • @krbhvac
    @krbhvac 19 днів тому

    Hi, are u based in Cape Town?… as I have a misfire issue on my (import) Opel Tigra (LHD)… and have basically bought (from Germany) all sensors and coil packs… plugs changed, ECU changed?… still a misfire on this Ecotec X14XE 1.4 16v motors?…, can u help? Motor was totally rebuilt and rebooted (only done 8000km) since then?… it has been to two mechanics but they “gave up”…. And car hasn’t been driving for the past 3 years… as it has been “in workshop/s” … after a slight misfire started. Car back fires only (last mechanic’s words) car is 1997 Opel Tigra 1.4

  • @TristanLiam-h5m
    @TristanLiam-h5m 4 місяці тому

    I have also done what you have done but my opel corsa b still revs or idles high
    please help me

  • @bevanmacclune8220
    @bevanmacclune8220 Місяць тому

    Hi good day,just want to know my car startup nicely but when the car gets hot the idle drop to 600/700 rmp,can u assist me mayb with that please,its almost the car then want to die

  • @clivegovender55
    @clivegovender55 5 місяців тому

    96 kadett 1.4i..i changed icv from Midas..car revs high and low..disconnect the map sensor and icv then car idles normal..but i can smell it running rich..

    • @solveitautomotive9485
      @solveitautomotive9485  5 місяців тому

      Hi Try to get a genuine second hand idle valve . One made in Mexico , it will be a better choice than the ones from the spares shops.
      Also check your wires and electrical plugs

  • @djjavisto
    @djjavisto 9 місяців тому +1

    I need your guidance. How many lambda oxygen sensors does this bakkie have? I have the exhaust gas oxygen sensor light on, and the engine sounds rough when idling.

    • @solveitautomotive9485
      @solveitautomotive9485  9 місяців тому +2

      This vehicle only has one on the exhaust. Rough idle as I always say can be many things. Start at the basics first.

    • @djjavisto
      @djjavisto 9 місяців тому

      @solveitautomotive9485 I took to Opel for further assessment and diagnosis. They suspect a faulty fuel pump or injectors. Does this make sense, though?

  • @daz1876
    @daz1876 9 місяців тому +1

    You need to do one on the TPS from gold wagen. You will see that it's the wrong one for the car. I had idle problems for a year. After trying many tps fr gold wagen. Cleaned my old one with electrical cleaner and put it back and the car is fine.

    • @solveitautomotive9485
      @solveitautomotive9485  9 місяців тому +1

      I try to avoid buying anything at GW , there parts always have some problem. That's why it's good to get to know the names of the various makes and manufactures of parts and research them.
      I would rather try Masterparts, Diesel. Electric, Suburban or Alert.
      Thanks for the suggestion I will do it for you and see what happen wish me luck 😓.

    • @deonvanzyl1465
      @deonvanzyl1465 8 місяців тому

      What electrical cleaner did you use?

    • @daz1876
      @daz1876 8 місяців тому

      @@deonvanzyl1465 any electric cleaner is fine. I used one from midas can't rem the name on hand

  • @dilloncowan6813
    @dilloncowan6813 4 місяці тому +1

    Ive did exactly what you did but the car stays idling high does not go down any tips?

  • @teddysibuyi4148
    @teddysibuyi4148 8 місяців тому

    Please tel me that you haven't refueled since you drove that 214km.

  • @buzwemacoba4055
    @buzwemacoba4055 7 місяців тому +1

    Location of the iac valve Chevrolet utility 2016 model please

    • @solveitautomotive9485
      @solveitautomotive9485  7 місяців тому

      On the throttle body , It's a joined unit . Also check gap and service on cps

  • @selbymudau9227
    @selbymudau9227 6 місяців тому

    Mu opel corsa utility 1.4 is starting but wont idle for long

  • @ivaanpotgieter4650
    @ivaanpotgieter4650 3 місяці тому

    Good day, have you had any speedo loss issues that you can share.

    • @solveitautomotive9485
      @solveitautomotive9485  3 місяці тому

      Hi . At this stage I have had none . If you have issues it's going to be at the cluster itself or at the plug that connects at the engine

  • @SimphiweSithole
    @SimphiweSithole 9 місяців тому

    I have an issue with my speedometer. Stopped working a while ago. Replaced sensors doesn’t seem to be helping. Any idea what else I can check and or replace?

    • @solveitautomotive9485
      @solveitautomotive9485  9 місяців тому

      That's a difficult one . Check the wiring from clock to sensor. Then the clock itself

    • @deonvanzyl1465
      @deonvanzyl1465 8 місяців тому

      I have the same problem, where is that sensor situated?

  • @kieravolkwyn351
    @kieravolkwyn351 3 місяці тому

    Hi, so I have the same engine, mine just the chev badge 6w engine, just had my cam replaced along with rockers and lifters, so it's quiet but idling rough and low at about 500revs which is definitely missing. I took off idling sensor and cleaned it and the O2 sensor did not touch the map sensor, was a bit to tight did not want to damage. However it still idles rough and at 500 revs, what am I missing, please help

    • @solveitautomotive9485
      @solveitautomotive9485  3 місяці тому +1

      Hi . It's very difficult to pin point. Everything has to be rechecked , from timing, tps to wiring . Make sure you use original sensors (Mexico) not the aftermarket ones . They work or they don't work in certain vehicles .
      I had a similar issue , turned out it was a loose wire in the small loom.

    • @kieravolkwyn351
      @kieravolkwyn351 3 місяці тому

      One last question, was I supposed to take battery terminal off when I took off the sensor to clean it

    • @solveitautomotive9485
      @solveitautomotive9485  3 місяці тому

      @@kieravolkwyn351 no it's not necessary, however after changing major parts or a service interval it's a good idea to do it as it resets the ecu.

    • @bevanmacclune8220
      @bevanmacclune8220 17 днів тому

      ​@@solveitautomotive9485Where did u look for the lose wire in the loom?

  • @JaendreDuPreez
    @JaendreDuPreez 9 місяців тому

    Where is the co2 sensor on a 1998 corsa b 1.6
    My utility is all of sudden very heavy on fuel after a normal service. Spark plugs smell petrol and is wettish, and car exhaust fumes are rich

    • @teddysibuyi4148
      @teddysibuyi4148 8 місяців тому

      I'm having the same problem. I replaced tps, idle and air intake senors on. My problem has been resolved with that.

  • @DimpieDeBruyn
    @DimpieDeBruyn 8 місяців тому +1

    update ?

  • @siyabongamakhaya-wx2st
    @siyabongamakhaya-wx2st 6 місяців тому

    This valves and censors only last 2 montsh