Hello i have a question can i juse low temperature solder 138°Celsius to solder it? Only ask because when i practice soldering i have burned my practice board😅
i want to build my fierst fpv and want to build with these motors and frame did i need these leds by the motors or are they only for the look of the drone?
ok thank you for answering! I have an other Question, can i build it but with the speedebee f405 mini a35 20x20? And i want to Thank you for your Videos to the Build because, i am German and in my Language there are NO Totorials for budget or small Drones and in your Video is the Language really understandeble. When you asked why i want to build my first fpv drone, at the 9. jear in School i must make a Big Presentation and the Theme i choosed is can i build a Fpv drone and can i learn flying it in 2 moth.
ok thank you for answering! I have an other Question, can i build it but with the speedebee f405 mini a35 20x20? And i want to Thank you for your Videos to the Build because, i am German and in my Language there are NO Totorials for budget or small Drones and in your Video is the Language really understandeble. When you asked why i want to build my first fpv drone, at the 9. jear in School i must make a Big Presentation and the Theme i choosed is can i build a Fpv drone and can i learn flying it in 2 moth.:yt:
Sorry for missing this comment. Yes you can mount the SpeedyBee f405 mini. If you're planning on using the HM Fyujon V2 along with it, it may be a tight squeeze height wise, given the f405 mini is a two board stack. Good luck in your build, practice and presentation!
Nice! The eachine tx06 looks interesting and compact. Hope it fits the build. Funny you mention the Super D receiver as I'm about to release a video in next day or so installing it into a quad and setting it up. Hope you find it useful. If I could suggest, you might want to use a smaller receiver such as the HappyModel EP1 or EP2 with 1 antenna for this build. It'll be easier to mount on a small quad. Just my thoughts.
Thats a great idea and thank you for helping me out i think i buy the Speedybee f405 mini and than i think i can choose one option when i know how many space i have for the misskng parts:)
Not sure what country you're in, but here's an eBay listing www.ebay.com.au/itm/296112226297?mkcid=16&mkevt=1&mkrid=705-154756-20017-0&ssspo=nx1KqOxjQXe&sssrc=4429486&ssuid=L0XTYCPxReu&var=&widget_ver=artemis&media=COPY Seems expensive, so maybe try find local supplier? I found mine in a local craft store.
I don't have the Walksnail system, but based off the flight controller specs, it can provide up to 2.5A of current at 5v, which should be sufficient for the 1s VTX. Hopefully others out there have tried with this FC and can comment.
Here you go! I've also added the links into the video description. Fyujon V2 25.5mm drill jig www.printables.com/model/745117-happymodel-fyujon-v2-255mm-m2-mount-hole-drill-jig Apex 2inch Accessories: www.printables.com/model/745159-apex-2-inch-accessories
@@nxp200 Thank you for sharing your 3D printing files with me. Your generosity is truly appreciated, and I'm excited to bring your creations to life. Thank you for contributing to the community! Best regards
Haha yeh, it is a bit. It flies quite well at the moment though. I chose this board for an experiment I'm gonna try in a future video. I agree, the 13A AIO with UART based ELRS would be great in this, and if I swap it out, I'll do an update.
Awesome thanks for sharing they STLs !! much appreciated
I have those 1002s in14,000 19, 00 23000 the 19,000. I like the controllability for 1s but the 14000 on 2s rips on the emax blur props 😊
This is fire
Hello i have a question can i juse low temperature solder 138°Celsius to solder it? Only ask because when i practice soldering i have burned my practice board😅
are 11000kw enough for the build? because i have really low budget and the mobula 8 motors are really cheap, but i dont konw if there are good enough?
Great work!! 🎉. What is the weir type 22awg 24awg?.
The battery leads are 18awg, if that's what you were referring to.
Nice build mate. I am considering a JHEMCU f745 aio for a 5" cruiser atm and wonder if you have any feedback on your JHEMCU aio. How has it held up?
No issues with the JHEMCU brand so far. Nothing has failed and the specs seem to be correct
i want to build my fierst fpv and want to build with these motors and frame did i need these leds by the motors or are they only for the look of the drone?
LEDs are not required at all. Purely for aesthetics 😂
ok thank you for answering! I have an other Question, can i build it but with the speedebee f405 mini a35 20x20? And i want to Thank you for your Videos to the Build because, i am German and in my Language there are NO Totorials for budget or small Drones and in your Video is the Language really understandeble. When you asked why i want to build my first fpv drone, at the 9. jear in School i must make a Big Presentation and the Theme i choosed is can i build a Fpv drone and can i learn flying it in 2 moth.
ok thank you for answering! I have an other Question, can i build it but with the speedebee f405 mini a35 20x20? And i want to Thank you for your Videos to the Build because, i am German and in my Language there are NO Totorials for budget or small Drones and in your Video is the Language really understandeble. When you asked why i want to build my first fpv drone, at the 9. jear in School i must make a Big Presentation and the Theme i choosed is can i build a Fpv drone and can i learn flying it in 2 moth.:yt:
Sorry for missing this comment. Yes you can mount the SpeedyBee f405 mini. If you're planning on using the HM Fyujon V2 along with it, it may be a tight squeeze height wise, given the f405 mini is a two board stack. Good luck in your build, practice and presentation!
Thank you👍♥️♥️♥️♥️♥️
Ok i am .aybe using the eachine TX06 for camera and Vtx and a super d diversity receifer but i am looking around for better options
Nice! The eachine tx06 looks interesting and compact. Hope it fits the build. Funny you mention the Super D receiver as I'm about to release a video in next day or so installing it into a quad and setting it up. Hope you find it useful. If I could suggest, you might want to use a smaller receiver such as the HappyModel EP1 or EP2 with 1 antenna for this build. It'll be easier to mount on a small quad. Just my thoughts.
Thats a great idea and thank you for helping me out i think i buy the Speedybee f405 mini and than i think i can choose one option when i know how many space i have for the misskng parts:)
Nice build can you give me a link of the two pen´s pls?
Not sure what country you're in, but here's an eBay listing www.ebay.com.au/itm/296112226297?mkcid=16&mkevt=1&mkrid=705-154756-20017-0&ssspo=nx1KqOxjQXe&sssrc=4429486&ssuid=L0XTYCPxReu&var=&widget_ver=artemis&media=COPY
Seems expensive, so maybe try find local supplier? I found mine in a local craft store.
thx@@nxp200
do you have a other link like amazon or bangood?
Tried looking on Amazon but seems they don't have that item listed. I don't shop on Banggood. Sorry
no problem but thx@@nxp200
Is the 5V BEC powerfull enough for Walksnail 1S VTX? Has somebody tried this FC with Walksnail? Thanks
I don't have the Walksnail system, but based off the flight controller specs, it can provide up to 2.5A of current at 5v, which should be sufficient for the 1s VTX. Hopefully others out there have tried with this FC and can comment.
Could you please upload or link the stl files, please? Thank you :)
Here you go! I've also added the links into the video description.
Fyujon V2 25.5mm drill jig www.printables.com/model/745117-happymodel-fyujon-v2-255mm-m2-mount-hole-drill-jig
Apex 2inch Accessories:
www.printables.com/model/745159-apex-2-inch-accessories
@@nxp200
Thank you for sharing your 3D printing files with me. Your generosity is truly appreciated, and I'm excited to bring your creations to life. Thank you for contributing to the community!
Best regards
You're welcome! All part of the fun in this hobby
I think the aio is too fat for this type of build😂. Jhemcu has the 13a aio with build in uart based elrs
Haha yeh, it is a bit. It flies quite well at the moment though. I chose this board for an experiment I'm gonna try in a future video. I agree, the 13A AIO with UART based ELRS would be great in this, and if I swap it out, I'll do an update.