How To Install LED Downlights (Ceiling Spotlights) | Easy Step By Step DIY Guide
Вставка
- Опубліковано 3 лип 2024
- How To Install LED Downlights (Ceiling Spotlights) | Easy Step By Step DIY Guide
00:00 Intro
00:17 How To Mark Holes For Downlights / Spotlights
01:36 How To Check Ceiling For Joists
02:38 How To Drill Holes For Downlights / Spotlights
03:41 How To Install New Cables For Downlights / Spotlights
05:52 How To Wire First Downlights
08:05 How To Wire Downlights In Loops
10:40 How To Insert Downlight / Spotlight Into Hole
10:37 How To Remove Existing Ceiling Light / Pendant
11:15 How To Wire Single Cable (2 Plate Wiring) Into Downlights
11:39 How To Wire Ceiling Rose (3 Plate Wiring) Into Downlights
16:03 How To Wire Power Into The First Downlight / Spotlight
How To Install LED Downlights (Ceiling Spotlights) | Easy Step By Step DIY Guide
In this video we are installing recessed LED downlights (spotlights) into a ceiling.
This is an easy step by step beginners guide for all DIYers.
We show you how to mark, check for ceiling joists and drill holes for your new downlights. We demonstrate how to run the new cable and wire into your spotlights. As well as a detailed explanation on how to connect your existing light fitting if you have either 2 plate (single cable) or 3 plate (ceiling rose) wiring.
Upgrade your room with new downlights / spotlights.
_______________________________________________________________________
Tools Required;
Electricians Screwdriver Set: amzn.to/3UTZh4A
Wire Strippers: amzn.to/41tXkhI
Electrical Voltage Tester: amzn.to/40oMMPH
Wago Connectors: amzn.to/3mZIS1N
Wago Junction Box: amzn.to/3oxIMz3
Twin & Earth Cable: amzn.to/3N2iD5s
_______________________________________________________________________
Please like and subscribe to The Home Improvements Channel UK
MORE VIDEOS FROM THE HOME IMPROVEMENTS CHANNEL UK;
How To Hang Wallpaper - Do You Know This Easy Method?
• How To Hang Wallpaper ...
How To Install Wooden Loft Ladder & Extend Loft Hatch | Easy Step By Step Guide:
• How To Install Wooden ...
How To Remove Bathroom Basin & Install New Sink Vanity Unit | Step By Step DIY Guide:
• How To Remove Bathroom...
How To Install A New Door To An Old Frame | Easy Step By Step DIY Guide:
• How To Install A New D...
________________________________________________________________________
Instagram - thehomeimpr...
Facebook - / thehomeimprovementscha...
TikTok - / thehomeimprovementsuk
Shop - www.amazon.co.uk/shop/thehome...
Email - diyukhomeimprovement@gmail.com
________________________________________________________________________
Thank you for watching The Home Improvements Channel UK.
Disclaimer:
The content provided by The Home Improvements Channel UK is for informational, educational, & entertainment purposes only and some projects and tools may not be appropriate for all skill levels.
This is a guide only and The Home Improvements Channel UK cannot be held liable for any work undertaken or damages caused.
#diy #howto #homeimprovement #spotlight #electrician #lighting #homerenovation - Навчання та стиль
i've been watching downlight videos for months, this one is by far the best one. top lads, good banter, to the point, and very clear/informative. perfect video.
Much appreciated! 😊💪🏼
Great detailed, idiot proof, explanation. You are great educators. Thanks
Absolutely brilliant and very well explained, thank you so much. I’m upgrading my 1960s kitchen cable (red and black, no earth - copper shortage) but the principle is the same. I can’t thank you enough. Cheers, Mike.
Very Helpful Well Explained 🎉
Great commentary and no spamming out to make it last for hours. Thank you.
Just what I’ve been looking for, well explained and demonstrated. Thanks lads! 💡👍🏼
Don't usually leave comments but Thank you guys top blokes. I was gone scream when you took down the ceiling rose and found the single 3 core. Many would have carried the video on but very helpful to show the other scenario which is what no one tends to show. 👍🏼 New subscriber
Legend mate really appreciate the comment have a top day 💪🏼💪🏼💪🏼
Thinking of doing this in next few weeks and this is exactly what I needed. Superb, simple explanation. Thanks
Excellent video - couldn't fault it one bit. Will be wiring up some spots in my room which currently has two wall hanging lights (off of one switch) - will be using every bit of advice right down to the copper wire for checking joists! Thank you!
Guys, this was just perfect, with the right amount of laughs to go with it too, thanks so much. Great tricks of the trade.
Just what I needed to fit spot lights. Excellent vid 👍
Brilliant , informative , fun , and easy explanation
Thank you so much, we have current existing downright I want to replace with more modern ones. This has just made my life soooo much easier!
😁👌🏼👌🏼👌🏼
Great video, thanks for posting. I'd love to see one where you install spotlights without access to the ceiling from above.
What a cracking video on how to wire spots up.
I've never done it before, but after finding this video, i feel totally confident now on taking on the job!
I was thinking of pushing the original light plate into the ceiling and running off the wire that holds the bulb.
I can now mark the wire and wire up everything else up to the wago connectors and still not know what they are all for lol class
Brilliantly explained thanks
Professional installation
Nice one lads.
I've got this to do this weekend.
I've also got an extractor fan running off my ceiling lights, so and extra cable going into the switched live.
You are an excellent instructor
first video which shows exactly how is it made!
Very well explained lads. Always great vids
Brilliant, thank you
Absolute top lads just made it so much easier for me to fit mine, once again cheers for your free advice 🙏👍
Thanks mate 😁💪🏼💪🏼
Brilliant video on YT or anywhere for installed down lights....much appreciated...
👏🏼👏🏼👏🏼
Great job... I like that you say I don't need to know what all those cables are at 15:55 that's fine... It looks as though it will do the job for me.. Thanks.. Great vid
Great video, very well explained, much appreciated.
Really useful video and very clear instruction thanks. Exactly what I was looking for.
Great to hear!
very enlightening video, spot on. Thanks guys!
Thanks ,This comment has brightened my day
You guys are the best!! Thank you so much for sharing ❤️
You're the best! Thanks for watching 😁😁
Thanks guys brilliantly explained 👌🏻
Glad you liked it!
Thanks. This helped me out so much regarding the live switched cable.
Glad it helped!
Really good and informative video. The old wiring segment was great and at a great pace of explanation
Cheers guys well explained
😊👏🏼👏🏼
Well done guys, helped me out fitting my bathroom spotlights. Most sparkies are a bit anal in sharing tips, thanks again guys.
😊👏🏼
Great post 👍🏻 the wiring at the end really helped me get over my issues- thanks 🙏
👍
Great job thanks for sharing
Thanks for your comment 👍🏻
Good video lad
Awesome video 👍🏻
Great explanation lads.,,,👍
Thanks mate
Excellent video guys👊🏻
Nice one Pete 💪🏼💪🏼
Very well explained, well done lads 👌👍
Thanks 👍
great video, thanks man!
Glad you liked it!
Great video guys
Thanks so much! 💪🏼
This was really good. More electrical vids please
😁👏🏼
Top video guys thanks enjoyed that
Thank you, appreciate your support 👍
Great vide very well explained. Thank you
Glad you enjoyed it!
Great
As always you guys are brilliant 👏
Thank you so much 😀
Thank you so much 😀
🎉🎉🎉🎉🎉 Jackie boy hi nice to see you 😂 brilliant clear advice there Phil. Bradley I bet it makes a huge difference in the loft having no Itchy insulation to contend with.
I'd love these in my hallway tbh but it would be a challenge running the wires and threading them 😢
🤣 thanks Elaine 😁👏🏼👏🏼👏🏼
Another easy to follow video. Thanks lads.👍
😁👏🏼👏🏼👏🏼
Thanks
All cause you guy's deserve it ❤
Thanks Elaine 🌟🌟🌟
Another brilliant step by step guide, couldn’t be clearer! 👍
Glad you liked it! 😊💪🏼
excellent can you do more of these please explaining where the wires went too. thanks
The Kinky Wire was the best bit making sure nothing was in the way
Great boss, how to do it 👍👍👍, friendly greetings from Indonesia 🙏🙏🙏
Thanks for visiting
💡 👏🏼👏🏼👏🏼
Excellent video as usual guys, thanks
Glad you enjoyed it
Also, if you have tri-colour lights, make sure they're all set to the same setting (warm, cool, or day) before pushing them into your ceiling, unless you want to drive your OCD mate mad!
🤣👌🏼👌🏼
are you doing a hiphop video? Movements sure are like in a hiphop video 😂
I have 2.5mm t&e is that ok to use im assuming. Just less flexible
two cables in my bathroom rose one a feed and one a switch line feed to the first spotlight ...what about the switch line?
Yesssssss
💪🏼💪🏼💪🏼
How would I do this in a flat roof extension ceiling?
Do all downlights now come with the accompanying plugs and sealed clamps??
Great vid. What were the downlights you used? They look pretty easy to install with the separate wiring box
Lap I believe 😊
If you were putting in the downlights and also keeping the original room light, could you just connect the downlight neutral and cpc to the ceiling rose and connect the downlight live to the switched live at the ceiling rose?
You can connect into original yes 😊
Really helpful. My only question is, what do you do if you don’t have access to upstairs to feed the cable?
Will need to open up the ceiling 😊
Assuming youve drilled in your holes, take a long flexible piece of material such as the uPVC draught proofing strips often used around uPVC windows and tape the cable to one end then push it through one hole in the direction of the next. If it doesnt go assume a joist, however you can then angle the strip upward slightly, passing it over the joist while another person keeps an eye out for it in the next hole. Abit fiddly but the hole should be large enough to grab the strip and cable with a hammer or crowbar/long hooked tool then pull through.
What are the downlights you used for that job
Should have put a brown sleeve on the return switch blue line. Then it would have been perfect. Still a good job tho
😊 my bad 🙈 and nice one mate 💪🏼
Diesnt he go on
@@homeimprovements
Hey great video, thanks, what if I don't have access to the top foor? is there a trick to pass the cables from one hole to the following from downstairs? Assuming that I have already a wire on the ceiling to start from.
Never mind, just found your other video, you guys rock. All the best from Italy
Hi guys excellent work and very detailed description,
You got a new subscriber, How much does a job like this usually cost including parts and labour.
Thanks for the sub! Not sure tbh varies a lot
Hi fellas, if im doing this on my ground floor, how do i loop the wires round as room above is a carpetted bedroom?
Hole saw to push cables through then repair ceiling is the only other option in that case 😊
I want to add lighting to the ceiling half bathroom. Got to figure out the trim first 😕. There’s a corner definitely not 45degees. I’d like to add a photo so you can see what I’m talking about. How does one add trim to the wall that’s less than 45degrees?? 😶🌫️
Hi, I've moved into a new flat and the bathroom has these downlights but one (out of 4) is not working. How do I fix/replace?? Thanks!
With a bathroom I would say electrician as it’s a special zone simple job but I can’t advise as the area it’s in 😞
How would you connect to switch and choose which spotlights turn on?
You need to split the circuit
Where can I buy the wire strippers you used?
Quick wire 😊😊
If you are putting spotlights in a room that's previous light wasn't a dimmable light is it a case of getting dimmable downlights and a dimmable switch or is there more too it??
Thank you
Yep and make sure the switch is suitable 😊
@@homeimprovements Thanks
Hi mate you got a link for these down lights ?
We don’t but there from screwfix 😊
Anychance you can link the name of the downlights youve used please ??
Not sure on that they are from screwfix tho 😊
How do you change the bulb to that light fitting
These led units bulbs can’t be changed
@The Home Improvements Channel UK thanks for replying but I suppose it would be a whole new light unit I have a rented house and can't find where I can get replacement ones
Hi mate how would it work for a loop in at the switch ?
Would there be a junction box under the floorboards that would need connecting to the first spotlight ?
Two plate ? Where the neutrals are at the switch ? If so the cable at original light can be moved directly to first spotlight
Thanks for the reply. Yes 2 wires in the COM, 1 in the L1.
This particular room has two light switches. One on each corner of the room. That’s why it’s set up this way.
Ceiling rose has just the switch live and a neutral. - so my question is still ok to do it via the wago connector method?
Perfect so yes just take that cable from original light to first spot light unless it’s too short then just extend it using the wagos 😊
Sorry my bad. There’s one wire in the COM and 2 at the bottom. 1 way and way.
Would it still work the same?
As long as you have the single cable in the light containing l/n/earth 😊😊
Can I legally do this in my own house for myself?
I always thought that if new wiring is added this can be only done by qualified electrician.
I am very handy with electrics but not sure about the legality.
Can you point me to a website explaining this.
Thanks for the video by the way.
I will try to find the exact regulations on what can and can’t be done 😁
Any circuit extended should be have minor works certificate issued. The only things that don’t really need a certificate would be to change a socket or light etc. many people get part p mixed up with the BS7671 which is the electrical regs.
Where is the switch cable in the first fitting
The switching is done at the switch 2 plate wiring so no switch line 😊😊
My ceiling rose is different to the way he is showing it. I don't have brown wires etc I got red wires.
Red is brown in older cables and black is blue
Be aware of your switch wires also, black could well be your switch wire 👌🏻
1.5 twin and CPC. Earth is the greater mas of the planet earth.
Dont forget studs
thankyou great info and as funny as fuck
Thanks for watching 👍🏻
guy's one word - Brilliant
Thank you
Why are you using 1.5mm when 1.0mm is adequate for this type of installation
Old habits no reason really plus matched existing feed from consumer 😊👌🏼
What is the name of green junction box ?
They are part of the downlights 😊
And then when your house burns down or someone gets electrocuted and your insurance company won't pay out, you'd wished you used a licensed electrician that issued you with a certificate of compliance :)
Cowboys
I know and
Like, subscribed and comment. Thank you very much you all are amazing and very helpful! Job done just watching your amazing video.
Awesome! Thank you!
Great video guys
Thanks so much!