How do you keep your neighbors in that complex from complaining about the burnouts and noise? I use to work around the corner and picked up small engine parts there before I knew who you were. Pre 2013
I moved here in 2014 lol But it's not like i am out being a jack ass everyday while the neighbors are coming to and from work. After hours quick 5 minutes never hurt nobody!
I was just watching your video and noticed the exhaust clamps you are using on your exhaust systems to clamp the joints together. What brand are they and perhaps do you stock or sell them ? Thank you for your time.
When u mount the engine and trans directly to the tube frames with the mounting plate how bad is the nvh? Do you get a lot of heat transfer into the tube?
I've always heard California has very strict emissions laws. Most of your builds are plated late models. Is there a special way you register them? Or do you just say screw it and hope you don't get caught?
Something ive been wondering is why we don’t see manual trans on prerunners. Is it just not popular or do you risk blowing up more rearends with a manual?
I might be able to answer this one for you. In my mind its a 3 part issue 1. Stress risers from loading and unloading the driveline with direct drive can be merciless on parts if you stick a landing with a lot of torque being transmitted if you forget to clutch in 2. Racers want to focus on driving and its just ine more element to distract the driver 3. You need to pick parts to a point that are popular and readily available and have the r and d done.
Do you ever do any of the Ford twin I-Beam front suspension? I had a 2002 Ford Expedition that got totaled a couple years ago, and I've always had a dream to build it into an 8-passenger pre-runner. If I ever get another one, I'd LOVE to have you all build it with a John Kasse big-block Ford and the twin I-beam front suspension. I think it would be hilarious to retain as much of the stock look as possible - track width, wheels, etc. - and absolutely freak people out with how powerful and capable it is. Haha!
I’m pretty sure you can order parts, I think he means they aren’t going to build a truck for you unless it totals 100k. The fucking overhead running a place like that is huge and if it didn’t total that it doesn’t make the shop a profit. 🤷♂️
You can go to there website are order what ever parts they make you want. What he's saying is they don't do minor jobs, full builds only. I fully get why he does this because if a trucks been to multiple shops for a build, some maybe not so stellar work from another shop could reflect badly on his. One stop start to finish.
Will there be anymore Raptor builds in the future? It’s been cool to see that truck come together…
yes, there is a couple more lined up
being European, curious about that D90, that'll be a beast, but the trucks, those trucks, damn 🤤🤤🤤
Planning on building another personal truck
awesome work guys keep the updates coming. dream job for me right there😍
Ryan wish Mike schwellinger could see you now buddy. Oh he's watching you from his cloud. Great video my friend. 🏁🏁💯💯
How do you keep your neighbors in that complex from complaining about the burnouts and noise? I use to work around the corner and picked up small engine parts there before I knew who you were. Pre 2013
I moved here in 2014 lol But it's not like i am out being a jack ass everyday while the neighbors are coming to and from work. After hours quick 5 minutes never hurt nobody!
@@Kibbetech lol, it probably was 2014. I’ve lost track of time since retiring from the city.
Absolutely beautiful 👍👍❤❤
El chromeo is a badass truck !!
When are you going to play a drum solo for us!?
soon!
Any AWD builds planned and if so what type of transfer case would you use ?
400hp at those giant tires is pretty stout. I be very happy if I was the owner.
It's like 430 but feels like 550 at the tires
Has there ever been a video of someone playing the drums up on the landing?
yes, me at every christmas party lol
Where did the Gold fetish come from?
I just wanna go fast.
I was just watching your video and noticed the exhaust clamps you are using on your exhaust systems to clamp the joints together. What brand are they and perhaps do you stock or sell them ?
Thank you for your time.
Just look up exhaust v-band kits on google
Chase looks exactly like Danny Gormican lol.
What is your favorite truck you've built so far?
When u mount the engine and trans directly to the tube frames with the mounting plate how bad is the nvh? Do you get a lot of heat transfer into the tube?
Not much heat transfer.
What's the average build time frame on a full frame up build?
If someone asked you to put ADS shocks on their truck would you?
Almost a little too fat for that dyno! I'm sure someone strapped it down, patted it twice and called it good to go!
awesome content! curious why diesel platforms arnt used for builds?
Too heavy, a lot of parts to work around and not good enought throttle response
I've always heard California has very strict emissions laws. Most of your builds are plated late models. Is there a special way you register them? Or do you just say screw it and hope you don't get caught?
Thats up to the onwer not us
being a poor. you could resale that fuel cell foam "packing" lol
😎👍💯
Something ive been wondering is why we don’t see manual trans on prerunners. Is it just not popular or do you risk blowing up more rearends with a manual?
I might be able to answer this one for you. In my mind its a 3 part issue
1. Stress risers from loading and unloading the driveline with direct drive can be merciless on parts if you stick a landing with a lot of torque being transmitted if you forget to clutch in
2. Racers want to focus on driving and its just ine more element to distract the driver
3. You need to pick parts to a point that are popular and readily available and have the r and d done.
Any vehicles that leave kib, are now smog exempt.
If you gotta ask how much it is then you can’t afford it. So go out in the garage and learn.
What were to happen if you would wreck a truck while “test” driving it??
Then we fix it.
@@Kibbetech how bad would that set you back?
And what if it’s a total loss?
@@TypeUsername34 i don't care to think about what if's...
Do you ever do any of the Ford twin I-Beam front suspension? I had a 2002 Ford Expedition that got totaled a couple years ago, and I've always had a dream to build it into an 8-passenger pre-runner. If I ever get another one, I'd LOVE to have you all build it with a John Kasse big-block Ford and the twin I-beam front suspension. I think it would be hilarious to retain as much of the stock look as possible - track width, wheels, etc. - and absolutely freak people out with how powerful and capable it is. Haha!
Dang was gonna guess most builds ran 60-80k im in the wrong business
60-80 doesn't even cover parts. Shock packages are 25k alone, sounds like you're in the business you should be in lol
The legend of REIKOO.Uno snowquen's is my idol. Hes the person I aspireq to be, hes my light of day ..QQQQ
So I can't order parts? Unless
It comes to 100k?
I’m pretty sure you can order parts, I think he means they aren’t going to build a truck for you unless it totals 100k. The fucking overhead running a place like that is huge and if it didn’t total that it doesn’t make the shop a profit. 🤷♂️
You can go to there website are order what ever parts they make you want. What he's saying is they don't do minor jobs, full builds only. I fully get why he does this because if a trucks been to multiple shops for a build, some maybe not so stellar work from another shop could reflect badly on his. One stop start to finish.
You can buy all the parts you want! But in the shop we only do full builds from start to finish with our parts only
@@BlackJacket705 exactly! You get it
I pick up a 08 chevy 1500 extended cab and need to give it the Kibbie treatment lt front 4 link rear swing set steering, cage , probably 50k in parts
Well that was a waste of the 60 seconds I could stand that vid. Stick to building trucks man
Maybe vids aren’t your thing
Thank you for taking time out of your day to complain about something that you voluntarily did haha
It's been a while since I've worked at a shop like this. Miss the fun keep having fun you guys build sick truck's stay innovative love kibitech 🦾😎🦾😎