I think some of the more negative commenters need to reread the name of the channel. The guy openly admits he is "Tinkering" and hasn't called the channel "Ace Restorations" which is not too dissimilar from what a lot of the worst restorations call themselves. Is he as good as Hand Tools Rescue? No, but nor does he claim to be and there’s very few people whose work is of that standard. Is he better than 80% of restoration channels on UA-cam? Most definitely. I don’t understand why so many people prefer to criticise rather than advise. Though those making safety recommendations do seem to come across more advisory, and I think they are worth heeding. He brought back a tool from the 60s or 70s and gave it new life. It might not be perfect in some people’s eyes, but I think he’s done a bloody good job. Far better than the vast majority of people can and would do. As someone whose childhood was the 60s I’m very grateful for the job he has done, it reminds me of a very happy time in my life watching my late father work with one of these tools. A great video, thank you.
I had a lot of old pipes and rebar to cut up and from what I read ua-cam.com/users/postUgkxPDBfLu68o58Aw85O_J-zIFfjJARBhp-3 this would be the tool for the job. Since I had never used one, I watched a couple of youtube videos and I'm so glad I did. Some really good safety tips, which I followed, and this tool did a splendid job. One good thing to know is the weight of the tool puts just about the right amount of pressure on the metal I was cutting, so I didn't have to use a lot of pressure, which is more likely to jam the tool. It made fast work of my job.
We had a similar Black and Decker in the family for over 50 years, the only thing that ever needed replacing was the Brushes once and the fuse in the plug twice. The thing still out performs most out there today.
For removing grease and grime, I find electrical contact cleaner works really well on all sorts of surfaces, not just electrical contacts. Nice video, too. Great to see old hand tools refurbished and brought back to life.
I honestly love your videos. No music, no talking. Just the tools and movement. Honestly so peaceful. I watch your videos every night before bed. Helps set the mood
Ignore negative comments from people who add nothing and only tear down. You put in a lot of work here and it shows. I generally avoid paint as I like to see the piece gleaming, which you can make that metal housing do. I want you to keep going, polish the bolts, the jacob's chuck. Make that beast shine, brother. Also, you will need more grease in the housing. When it warms up, the grease slides to the bottom so you want to fill it enough so that the bottom of the lowest gear can pick up the grease and help send it to the other gears. Keep going, my friend!
I have an old Black & Decker Home-Utility 1/4" portable electric drill guide book. Regarding lubrication of the drill (which looks much like the one in this video, but a bit smaller) the guide says: "This Drill was properly lubricated at the Factory and is ready for use. The gears should be re-lubricated regularly, from sixty days to six months, depending on use. Remove gear housing, flush out all old grease with kerosene and, with gears in place, re-fill the housing only half full. All bearings in the gear case end are lubricated by grease in the gear case. The commutator end armature end my be lubricated by removing the two screws at the back of the switch handle and lifting the switch handle out of place far enough to place one of two drops of oil on the armature shaft. It will not be necessary to disconnect the wires. This lubrication is essential only after an extensive period of operation. Drills out of service for a long time should be completely re-lubricated before use." There you have it. Beautiful drill restoration!
I've seen a lot of your videos the past few days, it is mesmerizing to say the least, and incredibly inspiring, I'll take up a few project myself this summer. Though, as an electrician, I'd suggest changing the whole electric cord into a new one. I can see you prefer to keep everything as close to original as possible, though I've see old rubber wires short circuit inside, due to rubber wearing out and cracking. Thank you for some great content, already excited for your next video!
I have this exact drill! It's still got all its original paint (it's an orange variant), still works and is still my main drill. It's been passed down through 3 generations with some other long lasting tools.
My dad had one of these when I was a kid and we used to do projects together using it. This brings back some nice memories. I have a feeling it's in a shed somewhere, probably in a similar shape to what this one was. I might dig it out and give it some TLC. Love your videos. Keep 'em comin'.
The cool factor about those old Black and Decker drills is that you can still get parts for them. I was able to get replace bearings, brushes and a new chuck as well.
My late father got exaktly this model from his father. He built a 28 foot cabin cruiser and one day the anchor burnt. But he still had some accessories like the b&d lathe which I became. I found the 720 model from b&d on a german flea market June 2019 for 8 € and did a similar repair. Thank you very much for your good video.
My dad had the exact same drill years ago and pretty much in the same state. Don't know what happened to it. This video brought back some wonderful memories. Great job by the way
I just got a 1/2" low speed high torque drill off Craigslist for $25... The exterior is clean and runs like a champ but is a total mess inside... Looks like it had been in a few machine shops over the years based on the all the names etched on it... Videoes like this make me realise how much I need a workshop of my own....
I have inherited a drill just like that. It works but it's so old I was afraid to use it. I may one day try to restore. Very cool. Love your tinkering. Well done.
The very good point about replacing the cable has been made & heck yes. After all your hard work & a cleanly filmed video, what not go the extra mile & fit a brand new chuck ? Outside of that, you,ll be using it & not me …………… nice work.
That's beautiful! My father had one. It's nice to see one again. You know, if you open it up all the way and leave out the bit you can pretend it's a machine gun. And if you have a brother, you can pretend to shot him. Just something I heard.
Many thanks for this video. I happen to have the exact same tool from the 70s which I use constantly in preference to newer products I hold. Never let me down, but watching this I know how to fix should it develop a problem.
The Jacobs Chuck can be removed with the screw inside, they are normally left-hand threads. open the chuck jaws all the way and you can see the screw, the chuck then screws off the other direction. this tends to be easier to do before disassembly of the drill motor. just FYI for next time you need to change the chuck.
It's neat to see how much your tecniqes have changed in so little time. Seems like you have learned a lot since even this video. I absolutly love your videos and think you do a great job!
I really liked the restore, you did a great job. if you put that much effort into though it may be worth while to use moly grease. those electrical connections also look like there about due for the white/green death, and may need changing rather than just a new strain release. This was really great though don't get me wrong. I love seeing old tools get some tlc (tender love and care).
Nice score I would love to have one of these models I love the stainless body drills that they made back in the 50s and 60s and before they’re just real quality built drills would love to know what lubricating oil I should use to lube mine because I have a bunch of them and I am going through and servicing them
I can get hold a a similar drill not sure of model but looked the same. Also had a hedge cutter attachment still with it's original box. My dad had one too many years back, can remember the electrical tingle off metal body ;)
Thanks! Very interesting. I'd like to hear about how it's doing after your project here... I thought that the gold paint was very tasteful. Also, your video skills are great!
Thank you Bradley! The drill has been working fine but of course I usually use other drills as I have more modern drills available with reverse etc. I think I'll use the drill mostly in some future videos
Very impressive. I would have thought you would have changed the wiring for new incase of any damage which could cause hot spots and a fire, and I would have thought adding more grease into the grease trap for the cog to always run smoother.
You cleaned it up a bit, got most of the gunk out of it. I was hoping to see how to replace the chuck as mine has broken cogs (teeth). But it runs smoother and will run cooler. Thank you.
If you insert the chuck key into the chuck and then shock it counter-clockwise, you should be able to screw it off. I have a D520 and I've had the chuck off a few times this way.
Be very careful when using paint remover, all it takes is one drop to get on the lacquer or plastic coating on the field coils or armature coils to cause a short. Even a brief contact with this coating can damage it and cause the insulation to fail later on if not immediately.
Pretty good restoration. I would have painted it the original gray, or clear coated the polished surface. You can get bearing material from McMaster Carr and adjust the diameter to the shaft. Maybe use correct size screwdriver in the future, less risk of damaging the screws. Blade thickness and width should match the screw.
La idea es también cambiar los cables del taladro, ya que con el tiempo los cables pierden protección y tienen mucha elasticidad, provocando que a futuro pase un corto circuito
I’ve been binge watching your videos, and I’m in awe on how much knowledge you have. Are you self taught? Went to school? Or just had it passed down yo you?
I love your videos ❤ But not comments telling you the inflow traction plate should attach to the vinyl valve output module or the reflex action of the positive baffle spring is hampered by the crossbar lever action
@@nothankyou5524 I agree, was just trying some gentle leg-pulling. As a complete ignoramus, I am in awe of all these restoration guys (and slightly addicted to watching them)
Awesome videos !!! Very very educational just by watching how you restore the items ! 😊 would it be possible to do videos on restoring more electronic items or furniture ?
might I suggest putting together a three axis gimbal for your moving camera shots - would help with stabilization warp during your video edit. Might make for a cool video too!
0:55 Whenever you hold something with bare hand to support and use other hand to apply pressure with flat tip screwdriver I’m worried it will slip and punch a hole in your skin.
![Someone paid an equivalent of $2000 for this in 1914 [Restoration]](http://i.ytimg.com/vi/rw_8FWJuSho/mqdefault.jpg)
![Someone paid an equivalent of $2000 for this in 1914 [Restoration]](/img/tr.png)
I think some of the more negative commenters need to reread the name of the channel. The guy openly admits he is "Tinkering" and hasn't called the channel "Ace Restorations" which is not too dissimilar from what a lot of the worst restorations call themselves. Is he as good as Hand Tools Rescue? No, but nor does he claim to be and there’s very few people whose work is of that standard. Is he better than 80% of restoration channels on UA-cam? Most definitely.
I don’t understand why so many people prefer to criticise rather than advise. Though those making safety recommendations do seem to come across more advisory, and I think they are worth heeding.
He brought back a tool from the 60s or 70s and gave it new life. It might not be perfect in some people’s eyes, but I think he’s done a bloody good job. Far better than the vast majority of people can and would do. As someone whose childhood was the 60s I’m very grateful for the job he has done, it reminds me of a very happy time in my life watching my late father work with one of these tools.
A great video, thank you.
Well said.
Completely agree with you
Well said!
random hands is a good restoration channel too
alphant1 sure they are ...
I had a lot of old pipes and rebar to cut up and from what I read ua-cam.com/users/postUgkxPDBfLu68o58Aw85O_J-zIFfjJARBhp-3 this would be the tool for the job. Since I had never used one, I watched a couple of youtube videos and I'm so glad I did. Some really good safety tips, which I followed, and this tool did a splendid job. One good thing to know is the weight of the tool puts just about the right amount of pressure on the metal I was cutting, so I didn't have to use a lot of pressure, which is more likely to jam the tool. It made fast work of my job.
We had a similar Black and Decker in the family for over 50 years, the only thing that ever needed replacing was the Brushes once and the fuse in the plug twice. The thing still out performs most out there today.
For removing grease and grime, I find electrical contact cleaner works really well on all sorts of surfaces, not just electrical contacts. Nice video, too. Great to see old hand tools refurbished and brought back to life.
Thanks!
@@OddTinkering wow
@@OddTinkering copper grease is a bad idea, it wears. you should have used regular grease
I honestly love your videos. No music, no talking. Just the tools and movement. Honestly so peaceful. I watch your videos every night before bed. Helps set the mood
I do the same thing now
Me too
These videos are honestly satisfying
Ignore negative comments from people who add nothing and only tear down. You put in a lot of work here and it shows. I generally avoid paint as I like to see the piece gleaming, which you can make that metal housing do. I want you to keep going, polish the bolts, the jacob's chuck. Make that beast shine, brother. Also, you will need more grease in the housing. When it warms up, the grease slides to the bottom so you want to fill it enough so that the bottom of the lowest gear can pick up the grease and help send it to the other gears. Keep going, my friend!
Thank you. I think I'll make sure there's enough grease
@@OddTinkering Keep going, man. Throw away the throw-away culture.
@@mantaship If we all do our part by eating just one bag of trash a month we can build a brighter future
I have an old Black & Decker Home-Utility 1/4" portable electric drill guide book. Regarding lubrication of the drill (which looks much like the one in this video, but a bit smaller) the guide says: "This Drill was properly lubricated at the Factory and is ready for use. The gears should be re-lubricated regularly, from sixty days to six months, depending on use. Remove gear housing, flush out all old grease with kerosene and, with gears in place, re-fill the housing only half full. All bearings in the gear case end are lubricated by grease in the gear case. The commutator end armature end my be lubricated by removing the two screws at the back of the switch handle and lifting the switch handle out of place far enough to place one of two drops of oil on the armature shaft. It will not be necessary to disconnect the wires. This lubrication is essential only after an extensive period of operation. Drills out of service for a long time should be completely re-lubricated before use." There you have it. Beautiful drill restoration!
I've seen a lot of your videos the past few days, it is mesmerizing to say the least, and incredibly inspiring, I'll take up a few project myself this summer.
Though, as an electrician, I'd suggest changing the whole electric cord into a new one. I can see you prefer to keep everything as close to original as possible, though I've see old rubber wires short circuit inside, due to rubber wearing out and cracking.
Thank you for some great content, already excited for your next video!
That was my suggestion also. It’s very relaxing to watch him work and gives me peace with all that is happening. Keep up the great work!
As an electrician too, I totally agree with changing a cord into a new one.
I have this exact drill! It's still got all its original paint (it's an orange variant), still works and is still my main drill. It's been passed down through 3 generations with some other long lasting tools.
That's one of the things I love about UA-cam. Whatever the subject, if you're not sure you can always find the experts in the comments! 🤣
Couldn't agree more , dicks .
Armchair experts 🤣
I absolutely LOVE your videos because they are informative and you are so cleverr. Your humorous side makes them totally enjoyable.
My dad had one of these when I was a kid and we used to do projects together using it. This brings back some nice memories. I have a feeling it's in a shed somewhere, probably in a similar shape to what this one was. I might dig it out and give it some TLC. Love your videos. Keep 'em comin'.
The cool factor about those old Black and Decker drills is that you can still get parts for them. I was able to get replace bearings, brushes and a new chuck as well.
I'm pretty sure my Dad still has one of these in his toolbox. Incredibly noisy drill, I'm amazed we are not all deaf! Nice restoration job.
Depending on the age, be amazed no one has been electrocuted. If you have to ask why, you shouldn't handle it until you don't have to ask why.
My late father got exaktly this model from his father. He built a 28 foot cabin cruiser and one day the anchor burnt. But he still had some accessories like the b&d lathe which I became. I found the 720 model from b&d on a german flea market June 2019 for 8 € and did a similar repair. Thank you very much for your good video.
Beautiful craftmanship. Great video.
the amount of dirt makes me excited to se it being cleaned XD
My dad had the exact same drill years ago and pretty much in the same state. Don't know what happened to it. This video brought back some wonderful memories. Great job by the way
Nice tool, i have a couple of "Skill Sher" drills, one of which was purchased in the early 1970s by my father, i may have a go at that.
I just got a 1/2" low speed high torque drill off Craigslist for $25... The exterior is clean and runs like a champ but is a total mess inside... Looks like it had been in a few machine shops over the years based on the all the names etched on it... Videoes like this make me realise how much I need a workshop of my own....
I have inherited a drill just like that. It works but it's so old I was afraid to use it. I may one day try to restore. Very cool. Love your tinkering. Well done.
The very good point about replacing the cable has been made & heck yes.
After all your hard work & a cleanly filmed video, what not go the extra mile & fit a brand new chuck ? Outside of that, you,ll be using it & not me …………… nice work.
That's beautiful! My father had one. It's nice to see one again. You know, if you open it up all the way and leave out the bit you can pretend it's a machine gun. And if you have a brother, you can pretend to shot him. Just something I heard.
Me as soon as he used the drill to finish the handle
"He used the project to finish the project"
No he didn't. it was a newer drill with keyless chuck and led lights on it.
Very nice, you videos are relaxing to watch. Thank you.
Many thanks for this video. I happen to have the exact same tool from the 70s which I use constantly in preference to newer products I hold. Never let me down, but watching this I know how to fix should it develop a problem.
I love seeing the restoration of "OLD SCHOOL TOOLS". Great job on the restoration. Excellent work.
Please can someone tell me how to turn the screw reverse anticlockwise direction. Thank you
Please can someone tell me how to turn the screw reverse anticlockwise direction. Thank you
Да, тут все на столько старо, что у меня олдСКУЛЫ свело
The Jacobs Chuck can be removed with the screw inside, they are normally left-hand threads. open the chuck jaws all the way and you can see the screw, the chuck then screws off the other direction. this tends to be easier to do before disassembly of the drill motor. just FYI for next time you need to change the chuck.
Thank you, for giving second life for those gorgeous tools 🙏
Thank you for not painting the main body, looks lovely.
I’ve been restoring my fathers old tools, thanks for posting
Man your videos are sooo satisfying to watch. Thanks
Wow that metal really shines it looks better without paint.
Wow. Back when handheld tools were made of metal shells. All my tools have plastic shells. What a time
stop buying cheap products.
@@TheresaPowers I think it is to reduce the risk of electrocution.
5:43 So this vid is the birthplace of “Paint Stripper 3000”.........
I would LOVE to own that drill!!
It's neat to see how much your tecniqes have changed in so little time. Seems like you have learned a lot since even this video. I absolutly love your videos and think you do a great job!
Wow my father have one of this, and still work very good.
Subscribed I can appreciate your work. Well done my friend. I’m in the 🇺🇸 Indiana
I love your restorations!
An absolute pleasure to watch
I really liked the restore, you did a great job. if you put that much effort into though it may be worth while to use moly grease. those electrical connections also look like there about due for the white/green death, and may need changing rather than just a new strain release.
This was really great though don't get me wrong. I love seeing old tools get some tlc (tender love and care).
Nice job well done 👪
Nice score I would love to have one of these models I love the stainless body drills that they made back in the 50s and 60s and before they’re just real quality built drills would love to know what lubricating oil I should use to lube mine because I have a bunch of them and I am going through and servicing them
Beautiful job 👏 👌 hope this drill gets years of use😁👍
It's a beautiful drill they don't make them like this anymore it's a shame the quality of these drills went downhill over the years
I can get hold a a similar drill not sure of model but looked the same. Also had a hedge cutter attachment still with it's original box. My dad had one too many years back, can remember the electrical tingle off metal body ;)
Great video 👍 thanks for making this..
Thanks! Very interesting. I'd like to hear about how it's doing after your project here... I thought that the gold paint was very tasteful. Also, your video skills are great!
Thank you Bradley! The drill has been working fine but of course I usually use other drills as I have more modern drills available with reverse etc. I think I'll use the drill mostly in some future videos
Can you restore my relationship with my ex gf?
I taint mistaken she’s mint condition,just built trashy in general
welp weld a couple sheets of metal and itll be done in not time!
jk
You must be young...
Impossible, he'd have to take her apart to she how she works. No man knows that!!!
Add some copper paste?
I've taken a couple of 70s b&d drills to bits to repair them once the mechanical assembly was opened sadly it was game over r.i.p
Whenever I see these type of old tools my mind jumps straight to horror movies
Very impressive. I would have thought you would have changed the wiring for new incase of any damage which could cause hot spots and a fire, and I would have thought adding more grease into the grease trap for the cog to always run smoother.
You cleaned it up a bit, got most of the gunk out of it. I was hoping to see how to replace the chuck as mine has broken cogs (teeth). But it runs smoother and will run cooler. Thank you.
If you insert the chuck key into the chuck and then shock it counter-clockwise, you should be able to screw it off. I have a D520 and I've had the chuck off a few times this way.
Great Restoration. Awsesome.
Dude you're the greatest hands down 💯
Be very careful when using paint remover, all it takes is one drop to get on the lacquer or plastic coating on the field coils or armature coils to cause a short. Even a brief contact with this coating can damage it and cause the insulation to fail later on if not immediately.
That original paint on the handle section is a color known as Argent.
Pretty good restoration.
I would have painted it the original gray, or clear coated the polished surface. You can get bearing material from McMaster Carr and adjust the diameter to the shaft.
Maybe use correct size screwdriver in the future, less risk of damaging the screws. Blade thickness and width should match the screw.
beautiful
I love your work. Keep it coming..Ü
I liked the knob polishing
My nephew says you should find a mate.
5:30 we don't make mistakes just happy little accidents
AKA Bob Ross!!!!
Why not change electrical Wire ??
Hi! I found this small type bushings in a store specialized in auto electrical parts. nice video!
La idea es también cambiar los cables del taladro, ya que con el tiempo los cables pierden protección y tienen mucha elasticidad, provocando que a futuro pase un corto circuito
This one was the most satisfying one
The inner bearing Is upside down.
Nice video.
It's a shame this didn't get the same number of views as some of your other videos, this is really fantastic work.
Very nice job
these restoration videos are so riveting, never thought i could get invested into no-speaking videos
Nice job
Nice job👍👍
I ran multi spindle auto screw machine at black and decker,1977-1983
Świetnie wyszło!
I have one of these drills from 1968.
I couldn't even apply the dam grease. I'll make a big mess. BEAUTIFUL!
Sweet job, brilliant!
I’ve been binge watching your videos, and I’m in awe on how much knowledge you have. Are you self taught? Went to school? Or just had it passed down yo you?
thank you.
Beautiful...congratulations 👍!
what type of lubricant did u use for the gear box of the drill?
What a handsome piece of vintage machinery! I loved watching you bring it back to its former glory! More tools please!
I have the same B&D drill in me workshop thanx now I know how too do it
Any chance it’ll go up for sale? Please let me know.
great ! congratulations
Nice work I have one
I love your videos ❤
But not comments telling you the inflow traction plate should attach to the vinyl valve output module or the reflex action of the positive baffle spring is hampered by the crossbar lever action
Different levels for different people, especially for those working at different levels of a craft. There's need and room for all.
@@nothankyou5524 I agree, was just trying some gentle leg-pulling. As a complete ignoramus, I am in awe of all these restoration guys (and slightly addicted to watching them)
Great job!
4:40 forbidden caramel
Awesome videos !!! Very very educational just by watching how you restore the items ! 😊 would it be possible to do videos on restoring more electronic items or furniture ?
might I suggest putting together a three axis gimbal for your moving camera shots - would help with stabilization warp during your video edit. Might make for a cool video too!
What a legend
Great work.
0:55 Whenever you hold something with bare hand to support and use other hand to apply pressure with flat tip screwdriver I’m worried it will slip and punch a hole in your skin.
Forget the Man With The Golden Gun. We have the Man With The Golden Black and Decker Drill.
so THAT'S where Wood putty comes from!
Should have used a sandblast to get rid of the paint.
Restoration ASMR
Very nice!! 👍👍👍
music is good
Can you do a restoration on my grandads drill? Would be a lovely momento to him