Angelina is seriously one of the best teachers I think I've ever seen. No joke. She could have a class of first graders fully assembling an engine block before recess.
We need a Donut vs RMS build-off, with no rules except a dollar limit. Have challenges set by Jerry & Jobe but not revealed until the builds are complete.
I stg Angelina is fkn CARRYING this channel, her knowledge is absolutely insane and she always finds a way to make it understandable, even for a pleb like me that just about understands how to setup a car. Put Sandro next to her and you have a perfect combo of goofy and actually teaching. Pls keep this up :)
Might have to add before ppl start shitting on me: I’m not hating on mr. Tristan here, Bro did just fine. He just let her do her thing and just adjusted to it. Nothing wrong with that, especially if it’s your first time and you just want the experienced to acknowledge your work.
the more i learn, i realise how smart angie is, every video she just has so much information its insane, love how comprehensive she is, and how well she can communicate what she thinks. keep up the amazing work all of the Real Mechanic staff!
im not a mechanic by any stretch of the imagination, so hearing about using too long of a socket could cause damage like this at 8:13 genuinely helped me, thank you!
You wonder why he makes that face as soon as the clip starts.. then it all makes sense when he says it's him hahaha had to rewatch that bit a few times, so funny
lol on the radiator little cap. My dad tried to replace his battery in his HHR. It’s in the back hatch. He was furious the post clasp wasn’t going on the positive post. Finally he got me to take a look. I admit at first I was like WTF? Asked if he got the right battery. But i knew all posts are the same. Then I noticed, it still had the plastic cap on it. Hooked right up after that. We had a good laugh over that one.
5:17 this is why you NEED to be absolutely sure if your Honda uses a group *51* OR a group *51R* battery! Both fit in the tray, but one moves the positive terminal to a position where the hood prop can contact it and short it out.
The color change head gasket tester is a pH test. When CO2 from the exhaust dissolves in the water it turns the pH indicator from blue to yellow. If you run out of tester fluid but have a fish tank test kit that would still work (the chemical is called bromthymol blue).
1:45 the injector signal out could be pulled down to ground, so if for any reason the ECU ground signal for the injectors gets 12V, they'll all turn on at once.
The first video is from PFI Speed. If I recall, the fuel pressure regulator diaphragm wasn't holding, and was actually filling up the whole exhaust system until it came out the turbo.
I'll believe the regulator, but filling up the exhaust sounds a little off since it would just dump out of the tail pipe. Fuel dumping out the compressor side of the turbo would be coming from the intake also.
ua-cam.com/video/fqX5yVNqbnM/v-deo.html 26:40... fuel pressure regulator diaphragm leaking and fuel travels through a vacuum hose to the intake where it fills up the intercooler and finally comes out the turbo.
@11:47 i do industrial maintenance at a wastewater treatment plant one of my tasks is painting, every goddamn time i paint something metal as soon as that paint hits dragonflies and wasps immediately fly into it, like every damn time.
Angelina has always been a pro. I have to say this guy is good. I still like it most when Sandro and Angelina are paired up. Maybe RMS and Donut aren't down for the count. Good job!!
20:24 The reason the battery got messed up so bad is not because its the fault of the tool more so the technician because on absorbed glass mat (AGM) batteries you have to charge those particular batteries at a low and slow amperage so having it charge at 30 Amps was way overkill lol.
For high torque values that you don't have the body mass for, I recommend going to the other side of the tire and pulling up on the wrench with your feet firmly planted on the floor. It's much easier than trying to push the same amount down. Pushing the wrench down can actually lift you off the ground if you weigh less than the torque you're aiming for. I've had it happen when I was trying to set an axle nut to 260ft/lbs, and I only weighed ~150.
@beeble2003 I generally try to keep one hand on the socket-end of the wrench to ensure alignment and to keep it from slipping off. Without a long extension (which I try to never use for high torque), the wrench is pretty close to the side of the car, so it's hard to get my center of gravity right on top of the wrench handle. Without getting the center of gravity over that tip, you can't reach that max number. I just find it way easier to flip the wrench 180° and pull upwards. 🤷
@@builttobeat2741 I do for the 360ft/lb rear axle nut, but it takes longer to set up the multiplier and bracing block than just pulling the 1 wrench out of the tool chest. So if I can pull it by hand, I do. Torque multipliers are pretty great though, agreed.
Love to see Angie back in another video! & honestly Tristan did great too! People complain because he reminds them of that spoiled kid who didnt work for the position. Y'ALL DON'T KNOW HIM THOUGH. He's a great bridge to the younger generations & will ultimately help those kids relate & potentially start their own car adventures! I bet they won't seeing y'all professional haters though..🤌🏽
I worked for a shop back in the 90's that handled a lot of law enforcement vehicles. Every single one of the local prison's Jeeps had dented up hoods from the batteries exploding. The constant overcharging from running 24 hours a day would cook them until they exploded. Funny thing, they wouldn't authorize upgrading the batteries on new vehicles until the factory one blew up.
Probably thought of it as assembling cheap furniture. Got an entertainment center from Walmart or Target when I got my apartment. Instructions literally said to keep twisting the screw until the head breaks off.
I've seen every episode of Real Mechanic Stuff since the first video, on the day of release. I watched the entire video and loved it just like every other episode of Real Mechanic Stuff. Read the comments after and was disappointed. I think a lot of people have become WAY to critical and overbearing with their criticisms ever since the whole "drama" broke a while back. Feels like people are just trying to find things wrong each video without something actually being "wrong". Tristian was great, I had no issues with this episode at all. Unless episodes become completely random and unrelated to "Real Mechanic Stuff", i'll always be grateful for the content.
Came here to comment on Tristan, but it seems like everyone else has already got that covered lmaoo. That aside, where my big dawg Sandro at bruh?? Sandro and Angie should just be the primary/permanent hosts for this channel from now on. Guests should still be brought on, but definitely have them two be the main hosts for the show!
love to see that donut is spreading the love with everybody on the channel and allowing everybody to get in on the videos.... but gotta say.. love ya Tristan..I can see you put a lot of work in. Bruh pls just stop trying to make cringey jokes..
No it wasnt it was caused from a bad fuel preasure regulator diaphram and the pump couldnt make pressure so it kept running and pumping fuel into the intake through the vacuum line and got into the cylinders through open valves and in the charge pipes and turbo throurh the throttle body
5:20 I had something similar happen to my camper trailer recently. The AGM battery shifted from its mounting bracket as we were driving over rough terrain and one of the terminals started shorting out the wiring harness. The whole time we were at camp we could just smell burning plastic. We didn’t discover it until we got home after a seven hour trip, and by that time the wires had melted out of the Anderson plug at the car and the battery was now dead in the trailer. It’s a miracle it didn’t catch fire at any point.
As much as I like all the presenters on this channel, Angie and Sandro are the Dynamic Duo of the torque wrench.
Steph is the background support, those 3 are my faves
Love Steph too, this dude... ehhh, Imma pass...
@@kickassamd he's like Jeremiah Lite
@@kickassamd Nothing against the guy, but wrong vibe for this channel.
I was thinking the same thing, just can’t get into this one, no offense to him
Angelina is seriously one of the best teachers I think I've ever seen. No joke. She could have a class of first graders fully assembling an engine block before recess.
Hey, whoa whoa whoa. This isn't old timey Detroit.
@@OfficialOpinion😂
not with the state of most first graders these days im afraid
We *NEED* an Angelina & Sandro channel... Hell... talk about cars, interest rates, watch trees grow.... I'll sub!
YES
We need a Donut vs RMS build-off, with no rules except a dollar limit.
Have challenges set by Jerry & Jobe but not revealed until the builds are complete.
@@dyent that sounds fun
@@Ty-bz7zx Sandro, Angie and Steph need to start their own channel, separate from the sinking ship that is Donut.
@@danielcarvalho-hx4vj I like em all, nothing against anyone. =))
I stg Angelina is fkn CARRYING this channel, her knowledge is absolutely insane and she always finds a way to make it understandable, even for a pleb like me that just about understands how to setup a car.
Put Sandro next to her and you have a perfect combo of goofy and actually teaching. Pls keep this up :)
Might have to add before ppl start shitting on me: I’m not hating on mr. Tristan here, Bro did just fine. He just let her do her thing and just adjusted to it. Nothing wrong with that, especially if it’s your first time and you just want the experienced to acknowledge your work.
I think she's an amazing teacher and would definitely take a class
Mechanic Mommy, but where is my Vato Vampire Sandro 🧛♂️
ong
Mans got a whole business to restart since Miranda's got fucked over
so steph is mechanic babe?
@@baddreams0919 Steph is SILICONATOR!!!
🤣mechanic mommy LOLOL
"He's got a pretty big tool, I don't know maybe not" priceless
I would've spat my drink. thank gods I wasn't drinking
He's got a pretty big tool but he needs to know how to use it
So...did you let Sandro F with that Van?
we need to know
I absolutely love when Angelina turns into a super professional explaining every detail.
Tristan has that "Captain Planet" 90's hair going.
AKA a mullet
He's definitely giving those Power Ranger vibes. Lol
I was thinking Street Fighter character just waking up.
and that jaw-line............
I call it the lesbian mullet
Angie for the win! You can count on her Steph and Sandro to make a great video! HEY DONUT, MORE ANGIE, STEPH and SANDRO!
Angelina gives the best, clearest explanations!
Good thing shes an automotive teacher 😂
@@LazyTeeRex It actually shows plus she is well spoken!
You know she's a amazing teacher
@@LazyTeeRex If only all teachers were as good as her.
Very confident speaker. Much respect
the more i learn, i realise how smart angie is, every video she just has so much information its insane, love how comprehensive she is, and how well she can communicate what she thinks. keep up the amazing work all of the Real Mechanic staff!
Glad to see Angela back haven't seen her in a bit
Angelina and sandro are the backbones of this channel, steph is great too. Without them I probably wouldn't watch as much.
Is it just me, or does she look thinner than the last video?
shes in the main donut channel now
@@ianworkman8199no, she’s always been tiny
@@ianworkman8199 nah, she has always been teeny tiny.
im not a mechanic by any stretch of the imagination, so hearing about using too long of a socket could cause damage like this at 8:13 genuinely helped me, thank you!
10:23 her reaction to "that's me" is the definition of "flabbergasted"
LOL for real xD
He seemed to get real quiet after that... not a happy boy!
You wonder why he makes that face as soon as the clip starts.. then it all makes sense when he says it's him hahaha had to rewatch that bit a few times, so funny
@@stone5against1 he's a good sport. I hope they keep roasting his content on RMS.
@@jspaulding4106 I hope so as well!
I love Angela. True mechanic from the shop! 19:58 customers coming! Gotta make that money! Really love when she's in these vids
Thank goodness for Angelina, I come here for her and Sandro...mostly....lol Wishing the smashed finger well!
First time seeing this guy now. He aint my boy Sandro but he's chill and seems humble. I can vibe with that. Nice vid.
yeah, he seemed pretty cool. I felt like he should've taken the lead on at least a few clips, he didn't really get to say much... 🤷
@@laurenozzoht636 Was his first video so he probably didn't want to take too much space.. he was more talkative in today's video though
Nah, just some douchbag with personality of a fucking walking stick. Bring Sandro back.
Angie Dunkin’ on that southern accent. Cali girl can’t help herself 😂😂
She clearly loves the accent
Almost swooned
Well I’d say she’s been downright charmed by this slackjawed southern draw and this Jacked up Ford F-250 that I pretend to farm with.
Tristans expression when he recognizes his own clip.... priceless
Angie is Donut Hermione
So who is Voldemort?
Lmao everyone be nice please. This is only humor
It's AngeLIna! Not Angelinaaaa!
It's nice of Angelina to bring one of her students.
Angelina is the best!!
She's hot 🔥 🔧
Not quite, Angie and Sandro together are best. This annoying little friggstick can E.A.D.
I really love Angelina doing a live analysis. I love watching her eyes. Big respect.
10:06 - Dude's face like... "This is my video.... oh no"
You tagged it before I did 😂
😂😂😂
That cracked me up. I like his humor.
bro went through all the stages of grief in like 10 seconds
Hey! It's Angie! Thought were lost her
Well she IS very small. Easy to lose.
@@bearsuitattack She'd be perfect for a Lotus Elise. That car is so great but hardly anyone can fit into it
She does have a real job 😅
@@losingmymind611 They ought to let her run a build. Maybe they'd build a car that works and lasts
The vapelord pic with the Alberta plates checks out… 😂
That ad is ridiculous 😂 5:10
lol on the radiator little cap. My dad tried to replace his battery in his HHR. It’s in the back hatch. He was furious the post clasp wasn’t going on the positive post. Finally he got me to take a look. I admit at first I was like WTF? Asked if he got the right battery. But i knew all posts are the same. Then I noticed, it still had the plastic cap on it. Hooked right up after that. We had a good laugh over that one.
A real man coulda forced it on over top the protective cap
Actually the positive and negative terminals are slightly different sizes to help prevent the battery from being hooked up backwards.
Opened my old Subaru radiator up. Smelled like gasoline. Didn't need a test 😂
LOL HA HA HA I love the pissing out correction! You can tell she works in the shop when that slipped out, and she auto corrected! HA HA HA 😂
If I ever end up on this compilation, take my car away and lock me up.
It's okay to make mistakes sometimes man. They even said they make mistakes themselves. It's how you fix it that matters.
That's how you'll end up on one of these compilations 😂
Or give you a job at Donut... Tristan?
Angelina's smile just makes my day better ;)
I was hoping Tristan was going to let Angie go to town on that clip of him bending his control arm
Ahhh shit... Tristan stepping in with the big kids now!
Good luck lil homie!
5:17 this is why you NEED to be absolutely sure if your Honda uses a group *51* OR a group *51R* battery!
Both fit in the tray, but one moves the positive terminal to a position where the hood prop can contact it and short it out.
Kid with the torque wrench needs to start by using the parking brake. All his initial effort is going toward moving the car.
Where is Sandro
Bro has a shop to run damn!
They don’t have the same people in every episode, chill
@@Marco-th5mp He closed his shop a little while back
@@CashCowSlayhe has two shops. The main one closed.
@@MrrHouse Oh really? I didn’t know, thought he just had one shop. Good to know though…thanks for filling me in!
I ALWAYS appreciate Donut's attention to sponsors and their sponsored section to videos. Absolutely the best. Second to none
The color change head gasket tester is a pH test. When CO2 from the exhaust dissolves in the water it turns the pH indicator from blue to yellow. If you run out of tester fluid but have a fish tank test kit that would still work (the chemical is called bromthymol blue).
1:45 the injector signal out could be pulled down to ground, so if for any reason the ECU ground signal for the injectors gets 12V, they'll all turn on at once.
5:00 that was one of the most INSANE AI generated/photoshopped clip I've EVER seen. Whaatt
Not ai or photoshop lol. More like a lot of video editing lol
Ang is back and I am excited.
The first video is from PFI Speed. If I recall, the fuel pressure regulator diaphragm wasn't holding, and was actually filling up the whole exhaust system until it came out the turbo.
Was it dumping it out the exhaust pipe too then?
It wouldn't come out that side of the turbo from the exhaust.
Watch the video, it was the regulator.
I'll believe the regulator, but filling up the exhaust sounds a little off since it would just dump out of the tail pipe. Fuel dumping out the compressor side of the turbo would be coming from the intake also.
ua-cam.com/video/fqX5yVNqbnM/v-deo.html 26:40... fuel pressure regulator diaphragm leaking and fuel travels through a vacuum hose to the intake where it fills up the intercooler and finally comes out the turbo.
Angelina is So cool, well spoken and sharp. 💘 You can tell she is an excellent teacher
I could look at Angelina all day
@11:47 i do industrial maintenance at a wastewater treatment plant one of my tasks is painting, every goddamn time i paint something metal as soon as that paint hits dragonflies and wasps immediately fly into it, like every damn time.
I really did enjoy Angelina and Tristan in this video and his little clip was also nice bonus
YAAAS MISS A!!!! I would genuinely believe her if she told me square wheels are more effective, 10/10 mechanic love her explanations
The bug slander out here, bro ain't even a cockroach
This car guy UA-camr is a compliment to the videos!
Shame Sandro wasn't in this. The chemistry and comedy is so much better.
Angelina has always been a pro. I have to say this guy is good. I still like it most when Sandro and Angelina are paired up. Maybe RMS and Donut aren't down for the count. Good job!!
lol that is not a green screen friendly haircut
Justin and Hankook with another BANGER of an advertisement. Those MT2's lookin good!
We need Sandro......
16:08 - If you haven't ever been in that headspace, you haven't worked on enough cars. hahaha
20:24 The reason the battery got messed up so bad is not because its the fault of the tool more so the technician because on absorbed glass mat (AGM) batteries you have to charge those particular batteries at a low and slow amperage so having it charge at 30 Amps was way overkill lol.
I was also thinking maybe there was previous damage from improperly charging, even though the snap-on was technically doing it correctly.
That was one of the best adds I've ever seen lol dope!
That bug went hard in the paint.
Angela is always a pleasure to watch 😍….the guy is a goofball.
For high torque values that you don't have the body mass for, I recommend going to the other side of the tire and pulling up on the wrench with your feet firmly planted on the floor. It's much easier than trying to push the same amount down.
Pushing the wrench down can actually lift you off the ground if you weigh less than the torque you're aiming for. I've had it happen when I was trying to set an axle nut to 260ft/lbs, and I only weighed ~150.
OK but with a 2ft bar, your weight is already giving you 300ft-lbs.
@beeble2003 I generally try to keep one hand on the socket-end of the wrench to ensure alignment and to keep it from slipping off. Without a long extension (which I try to never use for high torque), the wrench is pretty close to the side of the car, so it's hard to get my center of gravity right on top of the wrench handle. Without getting the center of gravity over that tip, you can't reach that max number.
I just find it way easier to flip the wrench 180° and pull upwards. 🤷
Much simpler to just use a torque multiplier.
@@builttobeat2741 I do for the 360ft/lb rear axle nut, but it takes longer to set up the multiplier and bracing block than just pulling the 1 wrench out of the tool chest. So if I can pull it by hand, I do. Torque multipliers are pretty great though, agreed.
@@beeble2003A torque wrench won't be accurate anymore if you but a cheater bar in it.
Angie! So nice to see her on the channel. Been a while
Love to see Angie back in another video! & honestly Tristan did great too! People complain because he reminds them of that spoiled kid who didnt work for the position. Y'ALL DON'T KNOW HIM THOUGH. He's a great bridge to the younger generations & will ultimately help those kids relate & potentially start their own car adventures! I bet they won't seeing y'all professional haters though..🤌🏽
Is Tristan one of Charlie Sheen's illegitimate children?
Oh god he does look a lot like Charlie Sheen 😂
He actually is
TIGER BLOOD!!!
🤣🤣🤣
yes
I worked for a shop back in the 90's that handled a lot of law enforcement vehicles. Every single one of the local prison's Jeeps had dented up hoods from the batteries exploding. The constant overcharging from running 24 hours a day would cook them until they exploded. Funny thing, they wouldn't authorize upgrading the batteries on new vehicles until the factory one blew up.
Where's Sandro
At his shop?
Love this channel and the presenters. The videos are a great gut punch for me anytime I feel confident I could work on my own car lol
That supposed apprentice thought that breaking off the studs was the torque limit. Like breaking off a piece of that kit Kat bar!
Probably thought of it as assembling cheap furniture. Got an entertainment center from Walmart or Target when I got my apartment. Instructions literally said to keep twisting the screw until the head breaks off.
First time in a long time I didn’t skip a commercial. Way to go Justin 😂
I demand Sandro.
It's nice to hear commentary from a professional UA-cam mechanic. 😁😁😁
Tristan brings zero to the channel.
Getting Buff Angelo flashbacks at 15:25 , LET’S GOOOOOOOOO!!!! 💪🏼💪🏼😆
I've seen every episode of Real Mechanic Stuff since the first video, on the day of release. I watched the entire video and loved it just like every other episode of Real Mechanic Stuff. Read the comments after and was disappointed. I think a lot of people have become WAY to critical and overbearing with their criticisms ever since the whole "drama" broke a while back. Feels like people are just trying to find things wrong each video without something actually being "wrong". Tristian was great, I had no issues with this episode at all. Unless episodes become completely random and unrelated to "Real Mechanic Stuff", i'll always be grateful for the content.
My struggle with torque on that plane (verticle) ended with a squat press. I can lift more than i weigh. Lift with your legs, Great video team!
Does that kid have a mullet?! 😂
Angelina's back! Finally.
RMS audience can't stand new faces for some reason xD LET'S GO MR. MOLECULEEEE
Lowkey that kickflip was 🔥 thooo
Came here to comment on Tristan, but it seems like everyone else has already got that covered lmaoo. That aside, where my big dawg Sandro at bruh?? Sandro and Angie should just be the primary/permanent hosts for this channel from now on. Guests should still be brought on, but definitely have them two be the main hosts for the show!
love to see that donut is spreading the love with everybody on the channel and allowing everybody to get in on the videos.... but gotta say.. love ya Tristan..I can see you put a lot of work in. Bruh pls just stop trying to make cringey jokes..
really impressive Light Truck Kickflip
That Hankook ad was so well done and just cracked me up 😂
Bring sandro back!!!!!!!
Bro's chill! Just not overly entertainy. Dig it.
Love Angelina, and... that add was very entretaining 😅
13:28 I don't think Angelina has. ever looked so adorable.
Perverser
Always happy to see Angie. She knows her sh*t!
not feeling metro mullet bro
You two have a vibe that's just very nice
Everything about this guy screams he smells of Taco Bell and Axe body spray.
10:07 his eyebrows and lashes almost joined!
0:51 it was a faulty Haltech ECU
No it wasnt it was caused from a bad fuel preasure regulator diaphram and the pump couldnt make pressure so it kept running and pumping fuel into the intake through the vacuum line and got into the cylinders through open valves and in the charge pipes and turbo throurh the throttle body
Why I love my diesel
It can’t do this.
@@fastinradfordablebut Your diesel can run away :>
@@mmllmmll22I’m not a mechanic but couldn’t you get a couple switches to shut off the fuel and oil pumps
@@mmllmmll22or an air shutoff valve
Okay. I hate goddamned ads as much as the next person, but your Dynapro kickflip ad was actually worth watching. Well done.
Welp, first RMS I can’t sit through.
Fr this is trash who thought this new guy was fit for the show
@@triggerjim13 I watched 10 seconds
Imagine being this much of a hater that you not only can't watch but feel the need to tell people you can't watch 😂
@@triggerjim13 bro the did an episode in Spanish... As much as I love those 2 I couldn't finish the video lol
Angie is back, letsss gooooo
I see the boredom of Angie trying to explain something she knows is tik tok fake.
5:20 I had something similar happen to my camper trailer recently. The AGM battery shifted from its mounting bracket as we were driving over rough terrain and one of the terminals started shorting out the wiring harness. The whole time we were at camp we could just smell burning plastic. We didn’t discover it until we got home after a seven hour trip, and by that time the wires had melted out of the Anderson plug at the car and the battery was now dead in the trailer. It’s a miracle it didn’t catch fire at any point.
What has his channel even become already?