Actually the magazine and buttstock are fine, the scar 16 (5.56) uses a magazine with a slight curve like this one and you can also get a buffertube adaptor and put an AR buttstock on it rather than the Ugg Boot Stock.
G O D’s 2nd Account since my old one got terminated it wouldn't surprise me, since he's been getting dislike bombed by assholes in Russia and Siberia for some fucking reason. It's to keep him from basically not making money at all.
You're probably right, that makes a lot of sense, but at the same time it's still compatible with the original so I'm assuming it's another one of Worker's plans for complete compatibility.
No, this piece has been out for a long time and works with a lot of the worker firearm replica kits for the stryfe. Because the swordfish is a copy of the stryfe, this piece will still fit, but it was originally designed for the strife specifically.
Well he brings up an interesting point of it not having a built-in filler for the top slingpoint like most of them. This had to be designed AFTER they finalized the swordfish.
But the swordfish doesn't have the same front sling loop as the stryfe, it's pre-filled in, so that doesn't make any sense...?? More relevantly, worker made their filler piece to make a flat front for the stryfe, so that all these replica kits fit the same way and also the muzzle replacement piece was designed so that the barrel kits could be smaller as the nerf muzzle attachment is quite wide. Both of those pieces were released YEARS before the swordfish.
Can someone help me? I purchased an mp5 kit for my stryfe and a half dart converter from worker, and no matter what i do, the darts keep getting stuck in the barrel. Ive tried many things to get it to work but it wont. Help me please
Hey Walcom, hope you are well. Tangentially related question here. I know lipo's are the go to power upgrade for the Stryfe, but, my question is about IMR's. Are IMR's used in a Stryfe still a thing? I don't want to rewire a Stryfe, but want to get some sort of performance upgrade. Is there some other, better way than IMR's? If they're still a good option, where is a good source to find them? Thanks in advance! And keep putting out this fantastic content, please! It is greatly appreciated.
People do use IMRs, but Life PO batteries are technically safer. IMRs are fine on stock motors but with after market batteries it’s extremely dangerous and can cause your batteries to vent blowing holes on your blaster.
![[REVIEW] 3D Printed Nerf Stryfe Cosmetic Kits | 3D TACTICS!](http://i.ytimg.com/vi/Qsjw4D1TrpA/mqdefault.jpg)
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Actually the magazine and buttstock are fine, the scar 16 (5.56) uses a magazine with a slight curve like this one and you can also get a buffertube adaptor and put an AR buttstock on it rather than the Ugg Boot Stock.
I kinda prefer the m4 stock than the scar stock
Still working on things, but got this video out. Up next is the long awaited reboot of Project Red Comet.
Walcom S7 ratings are disabled?
G O D’s 2nd Account since my old one got terminated it wouldn't surprise me, since he's been getting dislike bombed by assholes in Russia and Siberia for some fucking reason. It's to keep him from basically not making money at all.
The person doing the dislike bomb isn't from Russia, it's just they're using a botnet composed of Russian accounts.
Why do u think no one reads the description... I always do
Walcom S7 what’s project red comet?
Before you know it, you'll be able to slap a sniper barrel onto an hmg. No idea why you would need to do that, though.
You can literally do that in Blacklight, and it's OP as heck.
Walcom S7 Well damn. That sounds awesome. Imagine doing that with the heavy machine gun from halo 3...
That version of the muzzle is meant for the swordfish shell since it has that top part already filled
You're probably right, that makes a lot of sense, but at the same time it's still compatible with the original so I'm assuming it's another one of Worker's plans for complete compatibility.
Walcom S7 would make sense
No, this piece has been out for a long time and works with a lot of the worker firearm replica kits for the stryfe. Because the swordfish is a copy of the stryfe, this piece will still fit, but it was originally designed for the strife specifically.
Well he brings up an interesting point of it not having a built-in filler for the top slingpoint like most of them. This had to be designed AFTER they finalized the swordfish.
But the swordfish doesn't have the same front sling loop as the stryfe, it's pre-filled in, so that doesn't make any sense...??
More relevantly, worker made their filler piece to make a flat front for the stryfe, so that all these replica kits fit the same way and also the muzzle replacement piece was designed so that the barrel kits could be smaller as the nerf muzzle attachment is quite wide.
Both of those pieces were released YEARS before the swordfish.
Man plays blacklight retribution.
My guy
The six people who disliked this video didnt have a stryfe and couldnt afford this
The Goddess stryfe was the first time i used a scar kit
Your top rail is supposed to go over the front peice and you need a 12.8cm rail for the top of the stryfe to create a full rail.
I really want to see the Hera Arms Cqr Kit
not the wrong magazine
Can someone help me? I purchased an mp5 kit for my stryfe and a half dart converter from worker, and no matter what i do, the darts keep getting stuck in the barrel. Ive tried many things to get it to work but it wont. Help me please
I got the scar kit and it came with evry piece that I nedidnand it doesn't efect its performance
Love me a good ol semi auto rifle. The scar is probably one of my favorite guns of all time, I need to get this and a Styfe cuz I have zero lol
This is how we play
5:35 did you forget to put in jam door? xDDD
I really like Nerf for the same reasons
Where can I find that barrel piece
Description. unless you're asking about the muzzle break itself, which is from the Famas kit.
Hey Walcom, hope you are well. Tangentially related question here. I know lipo's are the go to power upgrade for the Stryfe, but, my question is about IMR's.
Are IMR's used in a Stryfe still a thing? I don't want to rewire a Stryfe, but want to get some sort of performance upgrade. Is there some other, better way than IMR's? If they're still a good option, where is a good source to find them? Thanks in advance! And keep putting out this fantastic content, please! It is greatly appreciated.
People do use IMRs, but Life PO batteries are technically safer. IMRs are fine on stock motors but with after market batteries it’s extremely dangerous and can cause your batteries to vent blowing holes on your blaster.
Well wrong stock, but if its a Scar-L if you want to ise that mag but other than that i have no Gripes
Now you have the early fortnite blaster
Galil kit (also I read the description)
This is definitely what I want for my LARP long barrel doesn't bother me were restricted to 120 FPS.
I like it, but to me, it looks like a m416 from pubg or a hk416 irl
Or a 416C in r6s
do more
looks awesome like this anyways Blacklight Ret was good back then
I miss it...
@@WalcomS7 het a ps4 say hello to ret
Get a ps4 hello retribution
No ps plus
I got yall
I like nerf for the gameplay. it’s just like cod or battlefield and the mods mix in some customization like both games
FRAST!!1!1!!! Looks like a nice kit, a bit too realistic for me, but nonetheless she’s a beaut.
Would look better painted up, but I don't have time to do that for a quick review. Perhaps it'll show up again in the future.
if you took out the air restrictors on the tri-break, would it become a shotgun?
yes
STG 44 KIT?
This is awsome
Where do the parts ship from? Like, will I have to pay customs?
I didn't when I ordered a worker stock or gavinfuzzy's parts.
Reading is overrated!😂😂😂
Looks like a nice kit.
Yay I'm early nice kit too
FIRST
First
Good day, sir.