you can leave both battery boxes on, you dont have to turn one off and the other on to switch functions. Turning on and off the remote controller switches between each battery box.
4 роки тому+2
Thanks for this useful information. I had sometimes problem to pair what I needed, so I used this way.
I just got the set today and testing the motors and I fount out that switching on and off is the only way to change between two motor boxes . Please tell me is that the only way or what is the function of the two grey buttons on top of control
looks like is better than lego set.. its fully remote control.
4 роки тому
Yes, full remote control is a big advantage.
4 роки тому
Unfortunately quality is still not so high like Lego - especially linear actuators are in poor quality. But the rest is not so bad. Also motors and remote control work well.
Hi, I'm mid build and I noticed the first pair of "feet" are not going down at the same time, when I press the button on the controller one rises while the other goes down, did I make a mistake? Or is it going to work properly when both sets of feet are built? Thanks.
Рік тому+1
Hi, I think it is caused by the transmission of the back of the legs. They are a bit further from the motor so there is some delay.
Hi, very nice review for this set, I'm currently near finish assembly of this set but facing trouble with the short cord, the guides in book seems not correct, can you please help?
@ the shorter black string which responsible for the extension of the boom
3 роки тому
@@steevankeitaro8224 I think there was no problem with the cord in my set. But I substituted the long cord (which holds the hook), original was not very elastic.
In the end I replaced the short black string with longer sewing threads to solve the problem, at the same time changed the way how the connectors connect pistons to lifting arm, now reach for new heights
3 роки тому+1
@@steevankeitaro8224 I found the same solution (for the longer cord).
Hello, i got up what you need to change. First, the long axle what come from motor "D" and engage the 8 tooth gear (dark grey), the 12 tooth gear (black) and the 20 tooth gear (yellow), and transmitting the rotation to the 24 tooth gear (grey), you need to cut in 2 (or changed with shorter ones), to separate them between 2 technic beam (the dark grey and light grey beam). Then you need one additional 12 tooth gear (black), what you need to place instead of a grey distancing piece (lego ID: 3713), to engage the yellow 20 tooth gear (lego ID: 32269), what apparently dont made contact with anything, just rotating with the main axle from motor "D". So, the automated redirectioning function (what is secured with the white gear 24 tooth clutch, ID: 60c01) will be anulated, but the gear ration will be reduced. (So we will using 4 axes instead of 2, what are used initially).
3 роки тому
Here is the video with modified steering for the RC Mobile Crane (Mould King 13107) - ua-cam.com/video/J1N9gWpeIqM/v-deo.html.
I noticed you changed the original long black cord for a white one, special reason? Also, in mine I have a problem. When extending the crane the small inner part does not extend by itself (have to by hand), I don't know what's wrong, I attached the short cord according to instructions, might you have an idea what could be wrong? Edit: hmm I believe I fixed my problem, partly at least, I shortened the short black cord and now the inner part extends automatically, only when retracting is doesn't retract fully automatically but at least partly :p
4 роки тому+1
Original black cord is not very flexible - that is the problem. So I use my own, gray thread. Also linear actuators are not very good, unfortunately I have no other to substitued. However model is very nice, with big functionality.
@ I have 6 channel battery boxes. I bought the crane set. I'm going to check out the instructions and see if the 6 channel battery is any added value to it. If not, maybe the android phone app might allow better operation with a single control device.
Jak jste přepínal mezi těmi boxy? Já mám od mould kinga bagr (napodobenina LIbbher 9800) a aplikaci se i neovedlo stáhnout a mám jen jeden (totožný) ovladač. Díky za odpoveď!
3 роки тому
Vypnout první, vypnout ovladač, zapnout druhý, zapnout ovladač. Myslím, že jsem to dělal takhle.
Zdravím, jěště bych se vás chtěl zeptat,při nabíjení vyndaváte cely batery box?mě to nejde nějak vyndat,tak jsem tam nechal zapichnutý nabíjecí kabel,abych to nemusel vyndavat.😮díky.
I just got the set today and testing the motors and I fount out that switching on and off is the only way to change between two motor boxes . Please tell me is that the only way or what is the function of the two grey buttons on top of control
Easiest way is to use the Mould King app. When you are using two boxes you have to push the button of your second box twice. Then you'll notice a different flash light from the second box. In the upper right corner of the app (use the "NEW 4.0" one) you can now switch between Box 1 and box 2. Enjoy!
Hello, I have a problem with the battery to be hung on the truck (p 561), the one I have has the same references as yours, but with a yellow patch. It has only one hole on the side and not 6 in all, which does not allow it to be hung from the back, it moves because it is hung on a single hole. I don't know how to do ... Can you help me please?
3 роки тому
I don't understand exactly. Maybe if you can share some photo.
cooli have the real lego crane but i really wish mine was rc and i dont have enough spare moters cuz i have an rc forklift and many other lego sets how much wasthis it looks like a pretty solid machine despite the fact its a knock off thanks
Hello i like your video. can you explain precisely how you fixed the steering genre wheel ? Its my first build i dont know what to do to make its smooth like yours. Thanks
4 роки тому
Hello, I changed gear ratio. I make some photos.
4 роки тому+1
Hello, here are some photos - photos.app.goo.gl/bbSamgotVtzfAPGYA.
Этот конструктор достаточно интерестный в чёмто может кому-то и лего заменить и ещё мне идея с полупрозрачным мотором понравилась жаль что они не все такие))
@ I got a MOC kit, it's made with CaDA parts, mouldking power functions, even Lego original turntables. There was no manual with it. Do you have the manual and code?
4 роки тому+1
@@MrAmorti Yes, I shared it in some comment lower.
Zdravim, akurat skladam tento zeriav, je to moj prvy motorizovany set. Vsimol som si ze kolesa su zaseknute uz ked som napojil motor. Vsetky funkcie co ma - riadenie, otacanie kabiny atd su pouzitelne iba s dialkovym ovladanim? Ci to ide aj manualne? Zatial mam len polovicu podvozku ale neviem ten zeriav pohnut rukou dopredu ani dozadu, je to akoby zaseknute. S dialkovym zeriav ide dopredu aj dozadu. To vsetky sety co su motorizovane tak sa s nimi neda hrat ale daju sa pouzivat iba s dialkovym? Viete co myslim? Mam napriklad nemotorizovane auto a chytim rukou a potlacim ide dopredu dozadu kolesa sa tocia. Dakujem za odpoved.
7 місяців тому+1
Ano, je to tak, motory jsou spojené se všemi pohyblivými částmi, takže je nutné ovládat přes dálkové ovládání. Jedině si pohrát s konstrukcí a zkusit udělat spojku, která by umožnila rozdělit motory a kola.
The Motors has No-name just fake bit a real motors has a Lego logo for 100% original motor the m motor colors looks wrong but in tra-clear instead of dark b. Gray
Tak to bohužel nemohu potvrdit - auto už je delší čas rozebrané a za tu dobu jsem hodně dílů prodal. Ale pravděpodobně fungují. Jediné motory, které jsem zničil byly ty, co jsem přetížil u modelu traktoru (ua-cam.com/video/LIhDm_YDqAQ/v-deo.htmlsi=Upw6vJXjP83ZprvA) a nebo poškodil kabel ozubenými koly.
Thanks for the great review! Can't wait to see the Mould King 13130 excavator review
Qrj4tv
Good to see expanded team, even if new recruit wasn't wearing correct footwear for a construction site. Great review.
Yes, it was very risque... :-)
Nice the Mobile Crane. Although already 2 years old the video still thumbs up thanks for the presentation! Oh yes, and there was also a subscription 😉
Wow, nice set and review, thank you!
you can leave both battery boxes on, you dont have to turn one off and the other on to switch functions. Turning on and off the remote controller switches between each battery box.
Thanks for this useful information. I had sometimes problem to pair what I needed, so I used this way.
I just got the set today and testing the motors and I fount out that switching on and off is the only way to change between two motor boxes . Please tell me is that the only way or what is the function of the two grey buttons on top of control
looks like is better than lego set.. its fully remote control.
Yes, full remote control is a big advantage.
Unfortunately quality is still not so high like Lego - especially linear actuators are in poor quality. But the rest is not so bad. Also motors and remote control work well.
@ x-ray please
Like it so much, I got a mould king Lego too
Hi, I'm mid build and I noticed the first pair of "feet" are not going down at the same time, when I press the button on the controller one rises while the other goes down, did I make a mistake? Or is it going to work properly when both sets of feet are built? Thanks.
Hi, I think it is caused by the transmission of the back of the legs. They are a bit further from the motor so there is some delay.
Good job
Hi, very nice review for this set, I'm currently near finish assembly of this set but facing trouble with the short cord, the guides in book seems not correct, can you please help?
Hello, which cord you mean?
@ the shorter black string which responsible for the extension of the boom
@@steevankeitaro8224 I think there was no problem with the cord in my set. But I substituted the long cord (which holds the hook), original was not very elastic.
In the end I replaced the short black string with longer sewing threads to solve the problem, at the same time changed the way how the connectors connect pistons to lifting arm, now reach for new heights
@@steevankeitaro8224 I found the same solution (for the longer cord).
Please, please show how you fixed the steering. The pictures you posted earlier really don't show what parts need to be changed.
Hello, i got up what you need to change.
First, the long axle what come from motor "D" and engage the 8 tooth gear (dark grey), the 12 tooth gear (black) and the 20 tooth gear (yellow), and transmitting the rotation to the 24 tooth gear (grey), you need to cut in 2 (or changed with shorter ones), to separate them between 2 technic beam (the dark grey and light grey beam).
Then you need one additional 12 tooth gear (black), what you need to place instead of a grey distancing piece (lego ID: 3713), to engage the yellow 20 tooth gear (lego ID: 32269), what apparently dont made contact with anything, just rotating with the main axle from motor "D".
So, the automated redirectioning function (what is secured with the white gear 24 tooth clutch, ID: 60c01) will be anulated, but the gear ration will be reduced. (So we will using 4 axes instead of 2, what are used initially).
Here is the video with modified steering for the RC Mobile Crane (Mould King 13107) - ua-cam.com/video/J1N9gWpeIqM/v-deo.html.
Is it possible to get the instructions for the crane and then make it with your own lego and parts it's nice motor placement and mechanisms
Instructions should be very close to the original Lego crane - lego.brickinstructions.com/en/lego_instructions/set/42009/Mobile_Crane_MK_II.
I can take a snap with pages where are motors.
@ that would be nicee
@@ImDamian09 Hello, here are some pages - drive.google.com/drive/folders/1j2eeINkfGfCCQDXH_xwadYyPgR7uhNnx?usp=sharing
@ Thank you!!!
I noticed you changed the original long black cord for a white one, special reason? Also, in mine I have a problem. When extending the crane the small inner part does not extend by itself (have to by hand), I don't know what's wrong, I attached the short cord according to instructions, might you have an idea what could be wrong?
Edit: hmm I believe I fixed my problem, partly at least, I shortened the short black cord and now the inner part extends automatically, only when retracting is doesn't retract fully automatically but at least partly :p
Original black cord is not very flexible - that is the problem. So I use my own, gray thread. Also linear actuators are not very good, unfortunately I have no other to substitued. However model is very nice, with big functionality.
@
Do you think it's possible to replace the bad actuator with original lego actuator?
I saw them selling separately at amazon
@@shaymeshulam8502 Yes, of course, used parts are identical with original Lego parts.
So this set has 2 batteries, and you can only operate one at a time?
That's how it worked in my case. But it is possible that a newer version can control both receivers at the same time.
@ I have 6 channel battery boxes. I bought the crane set. I'm going to check out the instructions and see if the 6 channel battery is any added value to it. If not, maybe the android phone app might allow better operation with a single control device.
@@williamdemler24 Maybe so.
What the name/ nr of newer wersion?
I have 2 controllers for them, to me it's way better than 6 channel battery.
Jak jste přepínal mezi těmi boxy? Já mám od mould kinga bagr (napodobenina LIbbher 9800) a aplikaci se i neovedlo stáhnout a mám jen jeden (totožný) ovladač. Díky za odpoveď!
Vypnout první, vypnout ovladač, zapnout druhý, zapnout ovladač. Myslím, že jsem to dělal takhle.
Dobrý den,myslíte že by šlo nějak upravit,aby se rameno zvedlo so většího úhlu?dĕkuji Václav
Dobrý den, to jsem nezkoušel, určitě by ale pomohlo použití XL pístů (Technic Linear Actuator Long with Dark Bluish Gray Ends - Item No: 40918c01).
www.bricklink.com/v2/catalog/catalogitem.page?P=40918c01&name=Technic%20Linear%20Actuator%20Long%20with%20Dark%20Bluish%20Gray%20Ends&category=%5BTechnic%5D#T=S&C=86&O={%22color%22:86,%22rpp%22:%22500%22,%22iconly%22:0}
@ jo to je dobrý nápad,hm tak,,dĕkuji. Mějte se
není zač - otázka je, jak lehká/těžká bude realizace :)
Zdravím, jěště bych se vás chtěl zeptat,při nabíjení vyndaváte cely batery box?mě to nejde nějak vyndat,tak jsem tam nechal zapichnutý nabíjecí kabel,abych to nemusel vyndavat.😮díky.
I just got the set today and testing the motors and I fount out that switching on and off is the only way to change between two motor boxes . Please tell me is that the only way or what is the function of the two grey buttons on top of control
I also did not found another way.
@ thanks for the reply
@@taskmaster2287 your welcome
Easiest way is to use the Mould King app. When you are using two boxes you have to push the button of your second box twice. Then you'll notice a different flash light from the second box. In the upper right corner of the app (use the "NEW 4.0" one) you can now switch between Box 1 and box 2. Enjoy!
@@Doatmunda-yg9is Thanks for useful information.
What did you exchange the cord with, please? Is that fishing line?
No, I think fishing line is not flexible enough, I use a gray thread (I hope google translates it well).
Gray thread?? Material cotton or silk?? Is it special or regular but thicker??
Hello,
I have a problem with the battery to be hung on the truck (p 561), the one I have has the same references as yours, but with a yellow patch. It has only one hole on the side and not 6 in all, which does not allow it to be hung from the back, it moves because it is hung on a single hole. I don't know how to do ... Can you help me please?
I don't understand exactly. Maybe if you can share some photo.
After having charged all the motors, what to do wiyh all those cables?
cooli have the real lego crane but i really wish mine was rc and i dont have enough spare moters cuz i have an rc forklift and many other lego sets how much wasthis it looks like a pretty solid machine despite the fact its a knock off thanks
Hello i like your video. can you explain precisely how you fixed the steering genre wheel ? Its my first build i dont know what to do to make its smooth like yours. Thanks
Hello, I changed gear ratio. I make some photos.
Hello, here are some photos - photos.app.goo.gl/bbSamgotVtzfAPGYA.
@ may I know which part of gear ratio that you changed? The pictures you posted I can't see the difference.
@@jeremycmlee Unfortunately I cannot remember, but I will take it apart so I can make another snaps.
@ Hi, appreciate if you could take out the part and shown again the gear ratio.
Can the model b of the 42009 be assembled?
No, this is completely different set.
@ ok, i understand, is the cargo included? (the brown box shown in the video)
@@polloaztecaSRT Yes, it is part of this set - ua-cam.com/video/71Lkb28G2lU/v-deo.html.
hi were have you buy this set ? and ist the remote 2,4 ghz?
2.4ghz and Bluetooth
Этот конструктор достаточно интерестный в чёмто может кому-то и лего заменить и ещё мне идея с полупрозрачным мотором понравилась жаль что они не все такие))
У него реально всё функции так быстро работают?
I do know where to get this lego set.
Any working links for the app on Android?
I think there is an QR code in the manual.
@ I got a MOC kit, it's made with CaDA parts, mouldking power functions, even Lego original turntables. There was no manual with it. Do you have the manual and code?
@@MrAmorti Yes, I shared it in some comment lower.
@@MrAmorti drive.google.com/drive/folders/1j2eeINkfGfCCQDXH_xwadYyPgR7uhNnx?usp=sharing
yx.fdtown.com/api/Apps/RobotApp for Android
But doesn't get last the loading screen for me
Zdravim, akurat skladam tento zeriav, je to moj prvy motorizovany set. Vsimol som si ze kolesa su zaseknute uz ked som napojil motor. Vsetky funkcie co ma - riadenie, otacanie kabiny atd su pouzitelne iba s dialkovym ovladanim? Ci to ide aj manualne? Zatial mam len polovicu podvozku ale neviem ten zeriav pohnut rukou dopredu ani dozadu, je to akoby zaseknute. S dialkovym zeriav ide dopredu aj dozadu. To vsetky sety co su motorizovane tak sa s nimi neda hrat ale daju sa pouzivat iba s dialkovym? Viete co myslim? Mam napriklad nemotorizovane auto a chytim rukou a potlacim ide dopredu dozadu kolesa sa tocia. Dakujem za odpoved.
Ano, je to tak, motory jsou spojené se všemi pohyblivými částmi, takže je nutné ovládat přes dálkové ovládání. Jedině si pohrát s konstrukcí a zkusit udělat spojku, která by umožnila rozdělit motory a kola.
@ dakujem za rychlu odpoved. Nevadi mi to len som o tom nevedel.
The Fake LAs has Spring into the shaft but the real one is no spring outside of the Real LAs
Is this a piece by piece clone of the Lego 42009
No, it isn't
It is Ultimate 42009 from Jurgens Technic Corner www.jurgenstechniccorner.com/index.php/moc-s/mod-s/ultimate-42009
where did you buy it
I have this set from the producer (Mould King), but it is available in all bigger online shops (Aliexpress, BangGood, GearBest etc.).
@ Thanks for the answer. And I think I can't get past this model and have to buy it too
@@ducrider2149 -- got mine thro Wish best kit ive ever had
hi i need help were is the place to buy this legos or this toy
Do you still need help
@@True_motion1 yes if you can
Fake hub doesn't have a higher power than a real buwizz
This sound is fucking annoying
i actually like it hehe
The Motors has No-name just fake bit a real motors has a Lego logo for 100% original motor the m motor colors looks wrong but in tra-clear instead of dark b. Gray
Funguju motory aj po 4 rokoch?
Tak to bohužel nemohu potvrdit - auto už je delší čas rozebrané a za tu dobu jsem hodně dílů prodal. Ale pravděpodobně fungují. Jediné motory, které jsem zničil byly ty, co jsem přetížil u modelu traktoru (ua-cam.com/video/LIhDm_YDqAQ/v-deo.htmlsi=Upw6vJXjP83ZprvA) a nebo poškodil kabel ozubenými koly.