Finish coating Drywall screws with 3" Nailspotter

Поділитися
Вставка
  • Опубліковано 21 сер 2019
  • Speed demonstration of finish coating drywall screws with the 3" Nailspotter.

КОМЕНТАРІ • 19

  • @stevenminnerly5336
    @stevenminnerly5336 Рік тому +1

    You probably need 4 coats with that over thined machine mud that ain't worth a damn

  • @domoxii3974
    @domoxii3974 2 роки тому +2

    How much time is it saving you roughly? I’ve wanted to make the investment but was told it’s not any faster than doing it by hand.

  • @ModernGentleman
    @ModernGentleman 3 роки тому +3

    There's a set screw on the stationary brake on the door of the box. Tighten it up a bit and you won't have to readjust the box after each pass. It'll hold it from flopping around so much

  • @TheAcc713
    @TheAcc713 3 роки тому

    What do you do on your third coat

  • @leandrocintrao67
    @leandrocintrao67 4 роки тому

    How is it so clean. mine leaves mud when I stop, why is tht

  • @SpYucaipaSoCal
    @SpYucaipaSoCal 4 роки тому +2

    You leave the springs on. Most of the time i take both off. Way less effort required.

  • @Art416
    @Art416 4 роки тому +3

    Great job .. you make it look easy. Could you do a video on cleaning and lubricating your boxes and bazooka. Thank you