Turning a Pen with Traditional Tools (How-to Beginners Guide)
Вставка
- Опубліковано 5 лют 2025
- How to turn a pen from start to finish with traditional turning tools.
Shop Pen Kits: www.woodturner...
Watch more pen turning videos: • Turning a Pen on a Lat...
We'll show you how to turn a pen using traditional turning tools. The process of turning pens can be quite technical, so we'll teach you the step-by-step process we teach here at Craft Supplies USA.
Read how-to article on our blog: blog.woodturner...
-PRODUCTS USED -
Spindle Roughing Gouge: www.woodturner...
Skew Chisel: www.woodturner...
Pen Kits: www.woodturner...
Pen Blanks: www.woodturner...
Barrel Trimmer: www.woodturner...
Pen Mandrel: www.woodturner...
Revolving Cone Center: www.woodturner...
Thick CA Glue: www.woodturner...
Medium CA Glue: www.woodturner...
Thin CA Glue: www.woodturner...
Glue Activator: www.woodturner...
Nitrile Gloves: www.woodturner...
Non-Stick Pen Bushings: www.woodturner...
Hut Plastic Polish: www.woodturner...
Micro-Surface Pen Finishing Pads: www.woodturner...
Abranet Sand Paper: www.woodturner...
Pen Drilling Vise: www.woodturner...
Pen Ultimate Pen Press: www.woodturner...
LINKS AND RESOURCES -
CRAFT SUPPLIES USA - The Woodturners Catalog
Since 1982, woodturners have trusted Craft Supplies USA to provide them with the finest woodturning tools and supplies. We pride ourselves on providing exceptional customer service and stand behind the products we sell. Our goal at Craft Supplies USA is simple: to make doing business with us so enjoyable that you look forward to doing business with us again.
Phone: 1-800-551-8876
Website: www.woodturner...
Address: 1287 E. 1120 S. Provo, UT 84606
Email: service@woodturnerscatalog.com
Join our Email list for promotions, new products and more:
www.woodturner...
Download Allan Batty's Woodturning Notes (Free):
blog.woodturner...
Visit our Woodturning Blog for how-to's and more:
blog.woodturner...?
View our Digital Catalog:
content.yudu.co...
Subscribe to Craft Supplies USA:
www.youtube.co...
SOCIAL MEDIA -
Facebook - / craftsuppliesusa
Instagram - / craftsuppliesusa
Pinterest - / woodturnerscat
Twitter - / woodturnerscat
#woodturning #woodturnerscatalog #penturning
Enjoy the video and give it thumbs up :)
awesome 🤘
absolutely fantastic and super in depth tutorial, helped me all the way through making my first pen. Thanks Mike !!
Best pen tutorial video by far. Thank you!
You're welcome!
That's a 19 mil gouge for everyone else. Good tutorial. Thank you.
When turning acrylic, I don't bother with the CA glue and continue on with sanding thru to a 12,000 grit and applying water at the same time. The finish on the acrylic comes out like glass and saves you from the CA ordeal with ridges and cacking around with that. Great video by the way.
Great video, very educational. Thanks Mike.
Hi Mike very informative/tutorial video
Thank you
Yiannis(Athens Greece)
Very informative for the first time making a pen
Well done video and great finish. Out to the shop and start turning!!!
i did this at school, thanks so much for your tuto !
Good video...one of the best. I sand the tube with 150 grit and wipe with a paper towel and acetone to remove any oils, fine particles, etc. I was pondering using the skew for the final dimensions. Thanks for the demo. I also made a tool from HDPE to insert the glued tube. No-stick bushings from the HDPE, too. I tried MM but the CA gummed up the grits and wouldn't wash off. More water? Thanks.
good job dude. appreciate the video.
When I see a lathe, I sub!
A barrel trimmer is not the best tool for squaring the ends. Use a disc sander. Faster and easier.
Outstanding video! Thanks!!
Is there another way to clear the excess glue from the tubes without a barrel trimmer?
Would pushing it out using a skinny tool be enough?
Thanks for video! Did you sand between CA glue coats ?
Is there any alternative to using a barrel trimmer? Would sanding the blank down be ok?
You can sand it, but make sure you're sanding on a square surface. Keep in mind that barrel trimmers will clear out any excess glue in the tube and sanding can't solve that problem.
@@CraftSuppliesUSA awesome, thanks
Is it possible to turn acrylic blanks with traditional tools?
Looks fun
Could other glues be used like Gorilla glue, Titebond wood glue, etc,.?
Bang beli di mana yg dalamanx itu...yg polpen besix...
Thanks for sharing that
No problem. Thank you for watching the video.
Why does Mike's voice sound deeper in different parts of the video?
Mike got a cold and we shot this over multiple days, so when he got sick his voice sounded different. 😒
I am just staring at lathe turning but all the cuts are scraps, no planning cuts. Maybe I am to new but that was to much sanding. I hate sanding. Very cool video, I am excited to try and make some pens someday.
What sanding is the best part
Sanding is the most relaxing and productive part.
Sanding in any type of woodworking is time consuming yet where a great woodworker can learn to shine😊. It makes a huge difference in the finished product. I am just returning to woodworking after many years away and can’t wait to see the progress time has made. I have never heard of CA glue as a finish for instance. I don’t even know how that is a finish.
@@4acrehobbytfarm If you know how to use a lathe and your tools, you can get a better finish with a blade over sanding. Sanding is a cheat.
👷👍
Very nice result. But pretty dangerous. If you spin too fast while aplying CA it will find your eye for sure ...
Agreed. Keep the speed low and always wear eye protection!
Good video but “traditional tools”? Not all the tools you used!