Mines does this one a year and I never buy a new blade I just have to buy a new clipper every time. It’s sad and frustrating. When I use to buy a new blade it never worked correctly unless I got a new pair of clippers.
The problem arises because a small hole is being left at the top in the middle of the blades, the same thing happened to me and I only graduated it a little further down making good contact with the two blades
This been a problem for me for years. I just solved it recently by taking it all the way apart, compressed air to clear out any hair of interior, alcohol then cool care the blades and put em back together. Back to normal. Pain in the ass to do but the quick version that really been helping is compressed air. Keep it clear between cuts
Try to un screw and open the case of it. There are two screw on top. Then we it's open. Take a air can. The has air in it and blow the hair out inside of the cass then put it back together. Brush hair out of blade's the oil them and see if that works for you. If it doesn't you have to replace the blades. So they can cut like new
Its simple guys ,,,,while the trimmer is onn running , squeeze the moving blade and move it left to right in a 1 -2 order, then while running just the blade imerse in alchohol which willl clean alll fine hairs jammed between the blades oil and use ,,always oil blades before and after use√
@@DanKlinge I wasn’t able to see any problems just examined how the inside works. I seen some videos on how the motor inside can be too far on one side. Mine never stopped cutting but they just don’t cut that sharp I wish I would’ve just got the babylyss pros
@@MarcoLiftz The issue with the chinese brands is.....do they sell replacement blades? I have a two piece set, cordless, outliner and foil shaver, but neither of them have replacement blades. Thus, I'm looking at this again.
I just fixed mine. For me it was the two outter screws the ones on the outter blade, were on too tight try loseing those.
Mines does this one a year and I never buy a new blade I just have to buy a new clipper every time. It’s sad and frustrating. When I use to buy a new blade it never worked correctly unless I got a new pair of clippers.
The problem arises because a small hole is being left at the top in the middle of the blades, the same thing happened to me and I only graduated it a little further down making good contact with the two blades
There must be some trick because the repair guys can get it cutting again by adjusting it .
This been a problem for me for years. I just solved it recently by taking it all the way apart, compressed air to clear out any hair of interior, alcohol then cool care the blades and put em back together. Back to normal. Pain in the ass to do but the quick version that really been helping is compressed air. Keep it clear between cuts
Try to un screw and open the case of it. There are two screw on top. Then we it's open. Take a air can. The has air in it and blow the hair out inside of the cass then put it back together. Brush hair out of blade's the oil them and see if that works for you. If it doesn't you have to replace the blades. So they can cut like new
Thank you. I've tried all that, to no avail.
Its simple guys ,,,,while the trimmer is onn running , squeeze the moving blade and move it left to right in a 1 -2 order, then while running just the blade imerse in alchohol which willl clean alll fine hairs jammed between the blades oil and use ,,always oil blades before and after use√
This blade is brand new and has no hair in/on it.
Man I'm having the same issue and I think it's because it's an after market blade but not sure
Adjust the tension screw
Which is the tension screw?
@@fontainesparrow5518 big ass screw below the blade
did you ever find out? I'm having the same problem now also
Nope...i ended up just buying a cheaper trimmer.
Same thing happened to me
How'd you fix it?
@@DanKlinge He didn't . He said he bought another trimmer
Purchase a original Andis t outliner blade and use that instead of the promate blade.
I went through the same problem the thing is you have to get the original andis t outliner blade from the beauty supply it’s about $24 where I’m at.
Should’ve taken it apart and see what’s going on inside
I have....just not on camera.
@@DanKlinge yeah same took mine apart
@@MarcoLiftz and did that fix it? or, were you able to see what the problem was once you opened it?
@@DanKlinge I wasn’t able to see any problems just examined how the inside works. I seen some videos on how the motor inside can be too far on one side. Mine never stopped cutting but they just don’t cut that sharp I wish I would’ve just got the babylyss pros
@@MarcoLiftz The issue with the chinese brands is.....do they sell replacement blades? I have a two piece set, cordless, outliner and foil shaver, but neither of them have replacement blades. Thus, I'm looking at this again.
Same!!! Wtf!!!???
WTF, ME TOO!!
Same here