5 year old video. Still saving haircuts! Thanks, brother.. I've just been slapping the 💩 out of her until she starts back up... She tried to put a restraining order on me but we watched your video and I snuck up on her (when she was unplugged) and stuck my screwdriver in her and performed a good old "lefty loosey", just like you said. Now we are living happily ever after. From her and me... THANK YOU.
6 years later and this video still saving lives, my andis just been sitting in my closet for months and nun of my barbers get my mustache right. I appreciate you for helping me fix mine you a legend bro!!!!
Man.... huge thanks. Mine hasn’t been working for two years and I refused to buy another. The others i bought have been subpar in comparison. Gave this suggestion a shot and they are working like new again!!! Much appreciated!
Bro your a life saver for the longest I've been having problems with my andis t-outliner for the longest and was ready but not ready to give up on them I also have some Wahl 5 star detailer t-blade trimmers each time I use them I get hair bumps on my face and neck but thanks to u I dnt have to use them anymore this video helped me alot sound jus like they do as if they were in the barbershop
Too tight - loosened and works like a champ. Thanks for this brother - wish I found it before I bought this new pair a few months back. Old pair from 2016 was still good just didn't know this was the issue
Had to come back and say thank you, this video worked like a charm for my Outliners 2 and My T-Liner, much appreciated, saved me money from having to go get a new pair, hope everything goes well for you in your life fam 😇
With how long the explanation took you almost lost me, but I managed to stick it out and I am happy to realize that you knew what you were talking about. Glad I stuck with despite the length and my limited attention span
Hey brotha thank you, I’m a legally blind veteran and I fix my clippers thx to your video 👍🏾 just FYI I see you have 11 thumb downs. The Hate is reaL but keep doing what you do cause you just help me by letting me know I’m my only limitation not my vision loss!
Also , make sure your top screw isn’t too tight ! I tightened the top screw on the cover too tight and it didn’t move , but when I loosened it a little then it worked so both methods are good
Skip to 3:10 you’ll thank me later. But also thank you for posting this. Took mine to an electronics repair and he told me it would cost more than it was worth to fix and also that I should invest in better clippers...🤦🏼♂️idiot
Some say that the screw on the bottom to adjust it . But mine are like yours.. the very bottom part to adjust the blade from being even.. not to the very left or the very right .. and some people say it's the blades themselves.. coming from someone who modded their andis.. and it's been a problem since I first got it.. at first I thought it was the stainless steel blades .. upgraded and got a babyless blade on it.. compared to these blades .. and well I just want them to last for years.... And reason I got it for home cuts... Cut like butter the first few times . But still overheat...
🤣 me too. I was just browsing Amazon for a new one bc mine was doing the same. So I searched and here I am lol. I dont remember mine costing that much tho.
Hey I have the t outliners modified into the skeleton and I put a ceramic blade on it. After I did that, I notice the blade would move out of place and I don’t know how to fix it.
This video is exactly what I needed, I’ve been trying to figure out this issue for years. You solved 3 years worth of headache in a 6 minute video!
Glad to help and glad it works
5 year old video. Still saving haircuts! Thanks, brother.. I've just been slapping the 💩 out of her until she starts back up... She tried to put a restraining order on me but we watched your video and I snuck up on her (when she was unplugged) and stuck my screwdriver in her and performed a good old "lefty loosey", just like you said. Now we are living happily ever after. From her and me... THANK YOU.
😂😂 glad it worked cuz
6 years later and this video still saving lives, my andis just been sitting in my closet for months and nun of my barbers get my mustache right. I appreciate you for helping me fix mine you a legend bro!!!!
5 years later and this video is still saving andis clippers. Thank you bro!
I been looking rough for about a month. I was 5 minutes away from buying a new pair. Saved me 60 bucks!! Much appreciated
60 bucks? You get yours off eBay... It's two years now so maybe it's inflation.. Mine where 100+
@@Jeralddoerrcrazy, you could’ve got a nice cordless trimmer for 100
@user-bq2xu3mc1r Yep... I own corded and the same version but wireless. Love them.
Just got the Andis Stylist Combo & the T-Outliner blade wasn't moving out the box thanks for the vid just what I needed!
Finally someone helped me straight and to the point, THANK YOU!!!!!!
This worked!! My liner's are working perfectly now.
Thanks!
Dude you’re a lifesaver man. I was about to give up on this thing 😭
nbs!!!
Man.... huge thanks. Mine hasn’t been working for two years and I refused to buy another. The others i bought have been subpar in comparison. Gave this suggestion a shot and they are working like new again!!! Much appreciated!
Bro your a life saver for the longest I've been having problems with my andis t-outliner for the longest and was ready but not ready to give up on them I also have some Wahl 5 star detailer t-blade trimmers each time I use them I get hair bumps on my face and neck but thanks to u I dnt have to use them anymore this video helped me alot sound jus like they do as if they were in the barbershop
@therealman5363 no worries fam. Glad it worked out
Too tight - loosened and works like a champ. Thanks for this brother - wish I found it before I bought this new pair a few months back. Old pair from 2016 was still good just didn't know this was the issue
thank you was about to buy a new one. i try this and it works better than before
Thanks man!! I thought my outliner was done but i followed your steps and it works!!
Had mines for over 10years and I was just about to buy a new one! Thanks bro
Thank you so much. Was just about to buy another one until I stumbled on this video. It really works.
Thanks to this video it saved me a headache because I was about to throw this buzzer out the window lol
Dude thank you!!!! I had this issue for almost year after replacing my blade. Thanks for sharing, my andis T liner works great now !
Had to come back and say thank you, this video worked like a charm for my Outliners 2 and My T-Liner, much appreciated, saved me money from having to go get a new pair, hope everything goes well for you in your life fam 😇
No worries. Glad it worked!
With how long the explanation took you almost lost me, but I managed to stick it out and I am happy to realize that you knew what you were talking about. Glad I stuck with despite the length and my limited attention span
You ain't kidding. He almost lost me.
Thnks I was able to fix my husbands clippers!!!!! Saved mad money
Works like a charm thank you sir. You saved me $75
My man, you just saved my some money. Fixed mine on first try. Funny enough it was the screws by the switch that had to be loosened. Thanks!!
Thank you!!! You are the realist for giving all of us these helpful tools.
Hey brotha thank you, I’m a legally blind veteran and I fix my clippers thx to your video 👍🏾 just FYI I see you have 11 thumb downs. The Hate is reaL but keep doing what you do cause you just help me by letting me know I’m my only limitation not my vision loss!
Thanks a lot brother. I appreciate the love. God bless.
Also , make sure your top screw isn’t too tight ! I tightened the top screw on the cover too tight and it didn’t move , but when I loosened it a little then it worked so both methods are good
Yes, this is accurate. I had to do that as well. Good tip to point out.
I think that's when you want to adjust the silver tip outside with the flat head screws.
🖤
Thank you, just fixed mines and they are working even better
Thankyou this video saved me from going to buy a new pair of clippers
This works. Such a quick and easy fix. I only had my timers for about a year.
Man your the best! I was this close to buying a new razor ‼️💯👌🏾
THAAAAAAANKKKKKKK YOUUUUUUU!!!!! So grateful that you took the time to make this and share it. 💛✊🏽✊🏽✊🏽
This worked 100% you saved my weekend thanks a million. Thumbs up
No worries. Like and subscribe.
Thank you bro!!! This just saved me another 40 from a haircut #godblessyou
great help, thanks for the direction, I just finished up working on mine and my dads!
No problem. Like and subscribe:)
Skip to 3:10 you’ll thank me later.
But also thank you for posting this. Took mine to an electronics repair and he told me it would cost more than it was worth to fix and also that I should invest in better clippers...🤦🏼♂️idiot
Thanks for the timestamped link!!!!!!!!!!!!!!!!!!!
Lol... These are the best Clippers ever...
Needed this vid, man! Came thru for me in the clutch. Much appreciated!
This video showed me perfectly how to fix my Andis!
This video came just in time. Good Looks
Thank you very helpful, just fixed mine. You saved me a $1000 Jamaican dollars.
Bless up fam
Sala mercy
You saved me $70. Thanks for sharing this
Dis a Game changer!! My Second pair was ready toss them like the first one back cutting like new
Nice job! Works like a charm
Tanks so much bro like it’s working better than before.
Great video. Just to add, I would try to line up the white ball just below the middle point. If it's too low that means its too tight.
Totally worked! Thanks! Saved me $70...
Exactly what was going on with mines, the switch was bad, I bypassed the switch and I'm good, better that buying a new pair ....👌🏾👍🏾
A lifesaver man thank you.
Great vid thanx for that ...cant count how many new pairs ive bought
Thanks for the video. Saved me from buying a new one.
Saved me $60-70. Thank you❗️
Hell yeah thanks man this is what was wrong with mine , cuts so good and sharp now thanks .
Amazing tutorial, worked like a charm!
Glad it worked. Like and subscribe!
Some say that the screw on the bottom to adjust it . But mine are like yours.. the very bottom part to adjust the blade from being even.. not to the very left or the very right .. and some people say it's the blades themselves.. coming from someone who modded their andis.. and it's been a problem since I first got it.. at first I thought it was the stainless steel blades .. upgraded and got a babyless blade on it.. compared to these blades .. and well I just want them to last for years.... And reason I got it for home cuts... Cut like butter the first few times . But still overheat...
Fixed. You the man, thanks my dude.
works perfectly you just saved me some money
No worries. Like and subscribe fam.
Thank you bro! I was going to send mine off to get repaired but this worked perfectly.
This helped out a lot. Thank you
This video solved my issue thanks alot.
Helped me fix mine, thanks bro!
Exactly what I was looking for . Thanks for your video and much obliged.
Thank u , saved me some dollars🙏
Thanks bro… worked perfectly for me…
Man than you so much. I was about to run out and buy a new one. It sounded like the motor was going out.
No worries. Like and subscribe. Glad it worked.
Thanks man great video very helpful
Thank you for this video, it worked for me!!
Much appreciated, sir!
Thank you!!!
Thank you explained everything 10/10
Thanks going to try this in the morning. Mine went days ago.
Wow! Thank you Sir. I am returning att the new one I bought yesterday. Lifesaver
I was about to trash this clipper because it would not cut...now it's cutting again better than before 3 years old!!!
This video just saved my clippers
Quick and simple, thank you
Vid starts at 1:23
Saved me a money! Thanks! ❤
Awesome video. Thanks for the help!
Great video! I was ready to toss mine
Glad it worked!
Very helpful!! Thanks very much!
Works like wonder thank you man!
Thanks bro! Working even better.
It worked! Thanks.
Good looking bro thanks a million!
I love hearing cp24 in the background 😂
😂😂😂
Saved my ass appreciate it man 🤙🏾
No doubt fam
Blessings brother! Much thanks for this 🙏🏾
My pleasure!
Than you , it's back working now
Thank you so much! It worked right away! Appreciate it!💪🏾💯
No worries. Glad it worked.
Appreciate that. Works like a charm now.
great vid!! works wonders.
Huge thanks man 👍🏽
Thank you bro I was about to buy a new one
Def worked for me! Thanks
thanks so much man! You saved me $50 hahah
🤣 me too. I was just browsing Amazon for a new one bc mine was doing the same. So I searched and here I am lol. I dont remember mine costing that much tho.
Glad it worked.
Thanks brother all set 🙏🙏
Thanks the fix worked!
No problem. Like and subscribe:)
Saved me in 2022 💯
Bingo! It works again. I only used it once. Is there a better one? You really shouldn’t have to do this.
Hey I have the t outliners modified into the skeleton and I put a ceramic blade on it. After I did that, I notice the blade would move out of place and I don’t know how to fix it.
Plug out each time you go back inside the clipper. Or you Will get SHOCKED! -Barber
Ig tht saying is true tht God looks out for babies and fools cause I had mine plugged up until I was satisfied with the sound and performance
You the goat save me a 100 today
This worked
Thank you!