Nice install :) But, PLEASE do not start the engine with the sensor heated up, like that. That is, by far, the #1 cause of sensor problems/death. The sensor element is made of ceramic. And, it "warms up" to over 1200°F ( glowing orange ). When it gets hit with a ( relatively ) cold/wet mass of start-up exhaust gas, the ceramic fractures. 1st, this causes internal leaks, with destroy the accuracy of the sensor. Then, the cracks spread and make the electronics flaky. Then, they hit something vital and, the sensors just die. If you leave the gauge powered up for more than a few seconds, before starting the engine, turn it off for about 20-30 seconds, to let the sensor cool off a bit, before starting.
Hey! Thank for this! I actually thought warming it up before starting was good to do; i had it backwards! Good thing i didn't put the new Bosch in and only did that 'Warm Up' in this video! Again I appreciate it! - Jonathan
@@alittlebit-ofeverything No problem. I always cringe when I see that. You would THINK that the WB manufacturers would mention this to people BEFORE they do it. A LOT of people think they are playing it safe by pre-heating the sensor. They usually end up calling the manufacturer to complain about sensor life. THEN they find this out.
If you dont like the tan interior mine has tan and they make spray paint for interiors and you could do a starlight headliner! Both very cheap and well worth it!
hey man i saw you video a while back about the supercharger and i was wondering if you installed if or if you ever are going to install it? But i love the vids keep it up
Hey Dylan, Thank You For The Comment! I actually returned it - I explain everything here in my Update Video Here! > ua-cam.com/video/2Gu-0QScOAg/v-deo.html Thanks, - Jonathan
Hey Gerson, Thanks For The Comment! I returned it for certain reasons, as explained in my Update Video Here! > ua-cam.com/video/2Gu-0QScOAg/v-deo.html Thanks, - Jonathan
@@devinclark2421 Hey Again! I have a separate video planned for that. Basically an update and future plan video. But in short, the unit was not installed. Thanks, - Jonathan
What website do you order from? I have a 2014 white Elantra and I’m looking to tune it to stage 2, also could you only find a supercharger? Or could you find a turbocharger as well
![[IGNITION POWER] New NGK Ignition Coils! + How To Replace Ignition Coils On 2014 Hyundai Elantra](http://i.ytimg.com/vi/1iT6F_58mrk/mqdefault.jpg)
Nice install :) But, PLEASE do not start the engine with the sensor heated up, like that. That is, by far, the #1 cause of sensor problems/death. The sensor element is made of ceramic. And, it "warms up" to over 1200°F ( glowing orange ). When it gets hit with a ( relatively ) cold/wet mass of start-up exhaust gas, the ceramic fractures. 1st, this causes internal leaks, with destroy the accuracy of the sensor. Then, the cracks spread and make the electronics flaky. Then, they hit something vital and, the sensors just die. If you leave the gauge powered up for more than a few seconds, before starting the engine, turn it off for about 20-30 seconds, to let the sensor cool off a bit, before starting.
Hey!
Thank for this! I actually thought warming it up before starting was good to do; i had it backwards! Good thing i didn't put the new Bosch in and only did that 'Warm Up' in this video! Again I appreciate it!
- Jonathan
@@alittlebit-ofeverything No problem. I always cringe when I see that. You would THINK that the WB manufacturers would mention this to people BEFORE they do it. A LOT of people think they are playing it safe by pre-heating the sensor. They usually end up calling the manufacturer to complain about sensor life. THEN they find this out.
If you dont like the tan interior mine has tan and they make spray paint for interiors and you could do a starlight headliner! Both very cheap and well worth it!
Hey Cool ideas! Starlight headliner sounds cool! Though personally I wouldn't want to do that interior painting part haha!
Thanks,
- Jonathan
Hey how did the amr500 work ?
I’m about to build mines as well 2016 model
Hey Denzel! Go For It!!
-Jon
hey man i saw you video a while back about the supercharger and i was wondering if you installed if or if you ever are going to install it? But i love the vids keep it up
Hey Dylan, Thank You For The Comment! I actually returned it - I explain everything here in my Update Video Here! > ua-cam.com/video/2Gu-0QScOAg/v-deo.html
Thanks,
- Jonathan
What happened to the supercharger project?
Hey Gerson, Thanks For The Comment! I returned it for certain reasons, as explained in my Update Video Here! > ua-cam.com/video/2Gu-0QScOAg/v-deo.html
Thanks,
- Jonathan
Yooo I have a 2013 elantra I'm about to install a amr500 on did you not install yours?
Hey Jake I actually returned it - everything is explained here in my Update Video! > ua-cam.com/video/2Gu-0QScOAg/v-deo.html
Thanks,
- Jonathan
I love the Bible scriptures bro💯❤️
🥰 Thanks!
- Jonathan
can i have your instagram i got a couple questions
Hey Devin!,
If you want, you can PM me on here, or just ask in the comments.
Thanks,
- Jonathan
@@alittlebit-ofeverything okay how’s the supercharger doing on the elantra right now?
@@devinclark2421 Hey Again!
I have a separate video planned for that. Basically an update and future plan video. But in short, the unit was not installed.
Thanks,
- Jonathan
What website do you order from? I have a 2014 white Elantra and I’m looking to tune it to stage 2, also could you only find a supercharger? Or could you find a turbocharger as well