Cutout, Assembly, and Finishing - The Tea Shelf Project - Part 3
Вставка
- Опубліковано 7 вер 2024
- Cutout, Assembly, and Finishing - The Tea Shelf Project - Part 3
More down here ↓↓↓ Click SHOW MORE!
In this video, I’ll finally finish the Tea Shelf project.
First I’ll show you the material I’m going to use, then plane, rip, and cross cut the material to size. Then I’ll show you my process for gluing up panels, surfacing the panels on the CNC, then cutting out the project parts.
Finally, I’ll show you how I stained, assembled, then finished the completed tea shelf.
As usual, if you have any comments or questions about anything I covered in this video, please join me for the Live Q&A, or put ‘em in the comment section below.
On Sunday, March 13th, I’ll be hosting a LIVE Q&A session, where you can ask your questions pertaining to anything I’ve covered in this video. That Q&A starts at 3 pm Eastern time, Noon Pacific time. Hope to see you there!
Here’s a link to the Live Q&A: • LIVE Q&A #135 - Cutout...
Link to the Playlist for The Tea Shelf Project: • The Tea Shelf Project
Link to Tools and Supplies used in this video:
Link to The Makers Guide for more info on a Triple Edge Finder: www.themakersgu...
Titebond 2 Wood Glue: amzn.to/3r7kaLI
Minwax #224 Special Walnut Stain: amzn.to/37jRN6a
Minwax Clear Satin Fast Drying Polyurethane: amzn.to/37thAck
Jorgensen 24 inch Bar Clamps (2 Pack): amzn.to/3Kh8vlp
Bessey Clutch Style Bar Clamps: amzn.to/3LRtZ8R
Freud 1.25 inch Diameter Mortising Bit (16-106): amzn.to/2QySKNh
Amana 46415-K 1/4 inch Downcut Spiral bit: amzn.to/3NMveb7
______________________________________________________________________________
If you’d like to support my channel and help with the making of future videos, you can donate by using the following link:
PayPal: paypal.me/Mark...
______________________________________________________________________________
Link to the Vectric for the Absolute Beginner Playlist: • Vectric for the Absolu...
Link to the 3D Modeling for the Absolute Beginner playlist: • 3D Carving for Beginners
Link to the V-Carving for the Absolute Beginner playlist: • V-Carving for the Abso...
______________________________________________________________________________
Get your Official Mark Lindsay CNC T-shirts and coffee mugs here:
marklindsaycnc....
marklindsaycnc.com is sponsored by Harneal Media - a website developing company that specializes in websites for the maker community. Find out more at:
harnealmedia.com/
______________________________________________________________________________
Link to The Trampled Underfoot Podcast, hosted by my friend Eloy Escagedo and I. "Two guys from different decades, backgrounds, and opposite sides of the continent discuss life, the universe, and everything. What's the show about? About an hour..."
UA-cam: / @trampledunderfootpodcast
Facebook Page: / trampledunderfootpodcast
Past Episodes available at our website: trampledunderf...
______________________________________________________________________________
For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at:
www.vectric.com/
______________________________________________________________________________
Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos.
I appreciate your support! You Folks ROCK!
This video is for informational and entertainment purposes only.
#Aspire #VCarve #Vectric #Tutorial