The Edge CTS2 will go higher than 22psi for boost readings. The stock MAP sensor on an LLY will not read any higher than 22psi. Need to get a gauge setup, or add an edge EAS boost tap to your cold side pipe.
@@koltenbrekkas9901eh a good tuner and a lil luck could make the rotating assembly last at 650-750...but I foresee the boost of the 467 pushing water past a head gasket eventually.
How did you make 587whp/1322wtq and only run 8.2 in the 1/8th with a single? I make like 530/1000 and run 8.2 in my crew cab LBZ. And you with much better DA than me.
7:16 "Ya, I don't think I could ever get rid of this truck, its too fun." Almost a year later its the giveaway truck. I'm definitely going to have to buy some merch for a chance to win this thing!
Another great video Jack! Very impressive numbers. Had to order one of the limited ghost hats to get some more entries into the give away! My LML should be tuned by Blake here very shortly. Keep up the good work!
Ordered a hoodie and a hat for my son!! Fingers crossed. Also have you tried the monster energy black? It’s cherry flavored. And the purple one tastes good too.
Great video jack, just note that stock tires may give you just a hair of a false reading to compare to only because its less rotational mass then the wheels you dynoed with first. Keep up the great content
As I'm sure you already know putting stock tires and wheels on will change the dyno numbers some. Because of the rotational mass of the wheel. But in your case I don't think you are very concerned about the numbers being a Lil off. Just wanted to make sure you knew.
Too much load thats why its spiking, plus usually dyno in 5th.. I dont wanna see pulse width on stock injectors making that much power and 10mm pump. I hope ur studding that lol
Didn’t you say that the new trans is good for up to 700 hp??? You might have to go back to the trans shop also!! Lol Impressive truck, nice work! Still like the chrome wheels better...
What's up Jack I see you haven't done a new key fob yet on the truck how about letting us see you do that and don't worry about a new one for the the giveaway truck I'll put one on there when I went it thanks again jack enjoy the video LOL
No chance. It's not surviving that much torque. 750 hp isn't an issue but 1800 lbft and it's bending rods at a minimum plus it will lift the head before that.
Most trq ever on the dyno..... not sure how I feel about that haha
The Edge CTS2 will go higher than 22psi for boost readings. The stock MAP sensor on an LLY will not read any higher than 22psi. Need to get a gauge setup, or add an edge EAS boost tap to your cold side pipe.
Dude thank you. I was thinking i had a boost leak. For some reason i thought they read to 26 and i had a leak
I was gonna order one soon since I just did y bridge and up pipes. Now i can let her RIP without blowing anything lol
This guy is right
Three trucks and still havent taken that box spring mattress to the dump hahaha j/k
Doesn’t require a trip to the mall... 🥺😂
585/1095 I really hope your getting head gaskets and arp studs with the bigger injectors and bigger turbo bc your gonna lift a head lol
Any minute
I'm more concerned about a rod coming to meet Jack after his turbo & injectors. Anything over 650 and she's not gonna be a happy girl.
@@koltenbrekkas9901eh a good tuner and a lil luck could make the rotating assembly last at 650-750...but I foresee the boost of the 467 pushing water past a head gasket eventually.
@@koltenbrekkas9901but yeah with 1,300 lb tq a rod may bend as well! lmao
@Dobbies Revenge and crack a piston LOLOLOL
How did you make 587whp/1322wtq and only run 8.2 in the 1/8th with a single? I make like 530/1000 and run 8.2 in my crew cab LBZ. And you with much better DA than me.
Impressive numbers, the spikes in the graphs have my curiosity. What gear were you in during the pulls? Working on those fueling upgrades myself.
What led bulbs are you using in the mini max?
Are u taking off the WCFab stuff that u have on the truck now and replacing it? If so I might be interested in the old stuff.
7:16 "Ya, I don't think I could ever get rid of this truck, its too fun." Almost a year later its the giveaway truck. I'm definitely going to have to buy some merch for a chance to win this thing!
who else seen that LOUD mustang at 3:50 that color is 😍
I wanna see jack in the diesel power challenge
straightdeadeye he would get smoked...
straightdeadeye yeah we’ll have to wait until the minimax has in the ballpark of 3000 horsepower 🤦♂️
I was guessing it would make more than 550hp I’ve seen some lb7s with efi live and basic upgrades exhaust intake and so on make 530hp on tune 5
Another great video Jack! Very impressive numbers. Had to order one of the limited ghost hats to get some more entries into the give away! My LML should be tuned by Blake here very shortly. Keep up the good work!
That’s sick jack, happy for you with the little you’ve done to the minimax engine wise. Can’t wait to see the power numbers with a larger turbski🤙
Thanks for giving us the great content! Keep it up love you and trucks
It would be really interesting to see the dyno numbers for both stock and aftermarket wheels!
Jack why wouldn’t you check the wheel fitment before you had it painted? that way they could roll or tuck the fenders bodywork them then paint it
Great video!! Keep them coming!!
What’s your horse power on tune 5? I meaning how much added power?
I recommend head studs before the added power
I watched RPMs video with you in it on Friday. Lol. Was nice to see the minimal fit in the dyno with the tires.
Use your spare wheel\tire from mini max and lmm for the dyno
Put stock tires on to dyno or take rear spacers off that will fix problem
Been following about a year or a little more, this is my favorite video yet. I can't wait to see the results with the extra air and fuel.
CTS Monitor is inaccurate for boost on Lly it will only read 22 lbs total because of sensor and I think ecm I hate it mine drives me nuts
Ordered a hoodie and a hat for my son!! Fingers crossed.
Also have you tried the monster energy black? It’s cherry flavored. And the purple one tastes good too.
07 F150harley I have to say the ultra blue is my fav monster flavor
Great video jack, just note that stock tires may give you just a hair of a false reading to compare to only because its less rotational mass then the wheels you dynoed with first. Keep up the great content
I m always impressed with your uploads I look forward for the next to come
The CTS will only read 22psi because of factor sensors, need an after market gauge
Your seeing more than 22 psi, that's just what the stock sensor reads up to, probs more like 25 or 26 psi
the minimax NEEDS a cowl hood ASAP
He already changed the hood, he's just not very smart
When are you going to head studs and head gaskets?
There’s nothing like a good sounding duramax 😍
Awesome numbers from the Minimax...does it still have the stock exhaust manifolds or did you get the hi flow ones from WCFab with the hi flow bundle?
As I'm sure you already know putting stock tires and wheels on will change the dyno numbers some. Because of the rotational mass of the wheel. But in your case I don't think you are very concerned about the numbers being a Lil off. Just wanted to make sure you knew.
Are you going to cut the frame and put a short bed on it to have a true minimax?
Can't wait for your channel to explode! Your content is amazing! Good luck Jack!
What camera do you use ?
Keep the videos coming btw !!
Just subscribed
586hp 1327tq your welcome comment viewers.
Ty
You should paint the wheel wells white
That truck is a little Prius repelant!!... It's a Beast!!!!
Why aren't your vids 1080p anymore
Those are really great numbers Jack , great job like always . Cheers .
Love the vintage intro 👍🏽
535 wheel hp
Would love to see dyno numbers on the lbz!
Dang didn't give it enough credit! Those numbers are seriously impressive, can't wait to see the post mod numbers!
is that the guy with the LS e36????
Fran didnt hot lap it?
Got two shirts and a mini window decal, passion is priority and bustin knuckles
when are you gonna get led interior lights? lol
What head lights or bulbs are those? lol Truck is super clean with all the color match!
Holy shit jack those numbers. Definitely can’t wait for the track to open to c that run
That smurf blue TBSS tho! I love those cars, definitely something I don’t see much of anymore!
I really want to see a stack or hood stack! I think that those 2000’s duramax’s look great with a stack!
Can us people up in Canada enter to win the truck
You could probably get better hp with the stock wheels because there will be less spinning mass
You should get traction bars since you are aiming for more power!!
Too much load thats why its spiking, plus usually dyno in 5th.. I dont wanna see pulse width on stock injectors making that much power and 10mm pump. I hope ur studding that lol
Just ordered stickers for the lbz giveaway! Keep making awesome content man! Love this channel
Great content! I always look foward to your uploads!! 👍😎
you should do a hood stack or a bed stack
Im guessing like 670hp
It was cool seeing you on tv and the mini max looks good
Can’t wait for the giveaway just ordered a hoodie last night. Keep up the great work jack.
That was great man! Good job.
Oh man put the big girl on the dyno with those 14 wides 😂
Hey jack, go with a gloss purple on the new piping!
Loving the truck.. Question I see no smoke clean as a whistle.... Sweet..
Man that minimax is a beast
4:52 also know as a “PETROL HEAD”
Needs the chromes back
If your in Canada can you win the lbz?
Aye Jack you should get the trucks some blow off valves
I’m not sure how much I believe 585 on a stock turbo and stock injector LBZ....
Didn’t you say that the new trans is good for up to 700 hp??? You might have to go back to the trans shop also!! Lol Impressive truck, nice work! Still like the chrome wheels better...
We had a LLY that made 638RWHP
What is that beep when he gets on it
I believe he said it was an alarm to let him know when his egts get above a certain number
egts cooking lol
560 @ 1300 torque
Loving the content man!! Keep it up!!👌👌👌
Great video and power numbers jack. Mini max is maximizing every ounce of diesel power. Love it!! Ps. Get u another vette to add to your fleet. Lol
When you have 2 tabs open.. one watching the new DURTYMAX JACK video, the other making a purchase on enthuzst.com 😉🤘 keep up the awesome videos dude
Hey jack I live In southern Delaware. Lmk if you want to come down and do some fishing!
the Mini did good on the Dyno
What day will you be calling the winner?
That's my buddy's blue/orange ss trailblazer that thing is nasty
Put all the duramax’s in the driveway for a instagram picture
Thats 600 on stock tires all day
Not looking to get a built motor yet lmao
Are you allowed to enter the giveaway if you are 17
I think the fumes got to you jack lol dime atap have some kids would you lol truck is a beast solid numbers
What's up Jack I see you haven't done a new key fob yet on the truck how about letting us see you do that and don't worry about a new one for the the giveaway truck I'll put one on there when I went it thanks again jack enjoy the video LOL
New mods, I'm gonna say at least 775hp and 1800 torque. Absolute BEAST of a go kart
No chance. It's not surviving that much torque. 750 hp isn't an issue but 1800 lbft and it's bending rods at a minimum plus it will lift the head before that.
“All the air flow stuff”
Love the video edit!!!
I’m sorry but I cannot call your truck daddy lol
652hp and 1,205 tq
I’m getting you some dimetapp lol
Insane hp! Awesome
I would love to see a pull going up to about 4500rpms
Wow awesome numbers man!